HP Envy 4500: 10 - app Windows did not start
I just installed the free update of Windows 10.
Initially a problem for my scanner HP Envy 4500 to scan documents, but it has now resolved. However, when I try to open the scan I get the message "the application has not begun." Help!
Sorted! The document had been restored to Microsoft Edge. I just had to change back to Adobe Acrobat 8.1.
Thanks anyway.
Tags: HP Printers
Similar Questions
-
Satellite M50: Windows did not start because of a corrupted system file
Hi all.
I have a problem with my laptop Satellite M50. When you turn on the laptop, a message appears: "Windows did not start because the following file is missing or corrupt: \windows\system32\config\system»
I am aware of my product recovery CD-Rom and have inserted - however, I don't want to reformat my HARD drive as I have files I back (foolishly) not upward.
Is there another method to repair the corrupted file without having to wipe all files on the HARD drive? (I don't have an XP CD - the operating system is loaded OEM when the laptop was purchased)
Thank you very much!
Hello
Hmm, using the repair console could be a good way to copy or replace the damaged or missing files on the HARD drive.
BUT you need to start the console of Windows XP CD of original Startup Repair.
Without this CD, you will not be able to repair the operating system. The Toshiba Recovery CD contains only image files and does not start the repair console.Now the question is; How to back up data.
You can remove the HARD drive and connect it to the PC second via the external USB HARD disk controller.
Then you should be able to copy important files on the second computer.
After backup files you can start the installation from the recovery CD.Good luck
-
Service pack update from 1 to 2 now, I get a "windows did not start properly.
I needed to upgrade my addition House of windows xp service Pack 1 to service pack 2 to add Norton to my system... I did it and my system asked me to re - start to take effect. I did and now I get the black screen that says white on it that says that windows did not start successfully... and start normally or in safe mode... I tried all the options and I get a dell screen and it goes straight to the screen... HELP PLEASE!
See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows XP SP3 problem
Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.
This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?
It's certainly interesting!
If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:SHOULD work!I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:and try the SP3 Setup file again.But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:1. have you safely backed up ALL your data?2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact. -
Original title: configuration of the CRA
Hi, I got this message then try to turn on my computer:
"Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.
can someone help me?
Hi sugenghariyono,
· Did you do changes on the computer before the show?
· What is the brand and model of the computer?
· Are you able to boot to the desktop?
Follow the steps in the article.
For reference:
Advanced Troubleshooting for General startup problems in Windows XP
-
How can I fix "Windows did not start because of...» »
"Windows did not start due to a problem in the disk of the computer configuration."
I have re-installed windows XP on my laptop using my USB because the laptop doesn't have a CD player. I used "WinToFlash" which allowed me to convert my installation CD to run on my USB. But no matter what I do I can't fix it. I am very good with computers but I have never encountered this problem. I can not re - install using my USB again because I get the error, and I can't boot the PC because I get the error. When I press a key it just restarts... Any help? Please?If you can boot into the BIOS screen, check if the USB is given as a choice of boot. Do as the first in the boot order.
Also this BIOS is set by default and if not go back to the default settings (see the owner's manual I don't know what computer you have)
-
Original title: where can I download iso windows xp recovery CD
I have a file.which damaged boot.ini file later, when I restart it could not start, with the message:
Windows did not start because of a configuration of the disk of the computer problem.Could not read from the selected boot disk. Check the hardware path and startup disk.
Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
So I need an iso file XP Recovery.
I can simply copy the iso files on USB and start with usb?Hello
1. don't you make changes on the computer before this problem?
First I suggest you try the troubleshooting methods provided in the following article and the check if that resolves this problem.
Error message: "Windows did not start because of a configuration of the disk of the computer problem.
http://support.Microsoft.com/kb/314477 -
Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.
Original title: I HAVE a BLACK SCREEN. Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."
I can't boot from the hard drive or Operating System CD. Any ideas on how to start the system to fix the error?
Hi FilippoPosato,This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.For more information, see:More information on: -
We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this
My pc does not have a hard drive. I can't restart in any mode.
Hello
· What is the number and the model of the computer?
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed on the computer?
· What options have tried advanced startup options?
Remove all external devices such as printers and scanners connected to the computer and then try to start.
As you mentioned you don't have a CD/DVD drive on the computer and you are not able to boot in any mode, there are only two options:
a. you will need to connect external CD/DVD drive to the computer for further troubleshooting.
b. you must contact the manufacturer of the computer.
-
I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk. check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.
Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank youHello
Follow method 1 and 4 in the article below and check if that helps resolve the issue.
Error message: "Windows did not start because of a configuration of the disk of the computer problem.
http://support.Microsoft.com/kb/314477/en-usI hope this helps.
-
Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.
Hello
· What is the number and the model of the computer?
· What is the service pack installed?
· The meadow of operating system has been installed on the computer?
· Do you remember any changes made on the computer before the show?
Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx
You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671
-
Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)
Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.
My Boot.ini file at this time was:
[boot loader]
Timeout = 5
default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
"signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetectI looked towards the top of this help page, but for now I'm unlucky:
http://support.Microsoft.com/kb/314477
(The next steps I took by throwing from the Windows CD and go into the repair console)
I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.
He gave me something like:
[boot loader]
Timeout = 5
default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
"signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetectI also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).
I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".
I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.
I've also marked the partition on the D: as active (in computer management), but it did not help me.
I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...
My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?
Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx
Could a clean install two HDD help? I hope I won't have to do...
Someone has an idea?
PS: I'm not such an advanced user so I need a solution step by step, thanks!
Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.
Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...
In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).
In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html
(except I've had the first installation already done).
Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.
EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!
-
We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might caused ha this.
Hello ILO,.
1. When you receive the error message?
2. are you able to boot to the desktop?
3. did you of recent changes on the computer?
Method 1
If you are unable to start windows check to see if you can boot into safe mode.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If you are able to boot into safe mode then I would suggest that you do clean boot and check.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get windows did not start and each time that I reboot I get the same thing.
* Original title: Windows7
O my pc displays a boot device error so I put in a disk hard new1tb and reinstalled Windows 7 and install goes ok just a little slow, but after the installation is completed after the first reboot I get windows did not start and evry time I reboot I get the same thing tried several hard drives and get the same error not sure of the material cause I can load in the bios very well any help would be great
In addition:
Clear CMOS - 3 ways to clear the CMOS - reset the BIOS
The setup of the BIOS or UEFI firmware, search for UEFI settings so that you can follow special steps to install UEFI below. Also set SATA controller on AHCI, hard drive, all on first start (or if UEFI Boot Manager WIndows).
Then just follow these steps for a clean reinstall Windows 7 making sure to remove all partitions up to unallocated space to make it cleaner. Follow special steps if you have a UEFI BIOS, which will have a system partition EFI in Managment of disk instead of reserved system (MBR) and make sure that the SATA controller is set to AHCI.
Other important to overcome optmizations install them hedges here to resolve the failures of Windows Installation 7
-
Windows could not, because the folling file is missing or corrupt... What can I do to get Windows
Hello
· What operating system do you use?
· You're able to boot in Safe Mode?
· Were there recent changes made on the computer before the show?
If you use Windows 7 try performing the Startup Repair and check if it helps.
Startup Repair
http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
To solve the problem of Windows Vista boot refer:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
For Windows XP, see:
How to fix a computer that does not start
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
Maybe you are looking for
-
Wifi button does not how can I activate wifi?
Hello I'm using compaq presario cq43. my button (f12), wifi and a few other buttons like insert, delete does not work. How can I activate my wifi. is there a way to activate the hardware button Thanks in advance
-
Possible bug in battery Toshiba BT: Polycom Voicestation 500 does not ring
I have Polycom Voicestation 500 speaker that is compatible bluetooth. When Polycom Voicestation 500 is connected to the Skype by BT dongle/battery Toshiba (i.e. just after the reboot) first, it does not at all sound. I think it's because the "wave of
-
I am running Windows XP. I've tried everything. Photo cartridge shows that it is not empty. Tried to reinstall the software, update drivers, different papers, disconnect, restart, heads of cleaning cartridge, realign and various settings of the print
-
How can I get rid of drunkgirlroom in the list of contacts
drunkgirlroom comes in my contacts how to expel?
-
Recommended settings for network locations
Having a problem with setting up of parameters with my computer running on the same network, please help! Margaret Egan