HP Envy 4500 All in One

Similar Questions

• HP Envy 4500 All in one Printer

  Hello, I have a HP Envy 4500 all in one printer that is only a year and have had many problems with.  Recently, when I turn it on, it displays an error code; 0XB3F4F4F8. I have not found what means this error code. ? I tried to unplug and then turn on to get the Welcome screen, then it said error code and does NOT stop automatically. I have to unplug it to stop it. Any help would be greatly appreciated!

  Hi!, jenwad87:

  Refer to the HP printer... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/document/c00489814

  Please, contact with the help of HP, of... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/troubleshooting

• HP Envy 4500: Cannot print Photos and large documents on my HP Envy 4500 all-in-one printer

  Hello

  I bought my Hp Envy 4500 all in November last one. It worked like a charm for the first 2 months. I tried to print photo 4 x 6 a day. 2 first impressions were good, and the third image has begun to fade from the half. Documents not threatened by more than a few pages. I tried to uninstall/re-install, printing via USB, set static IP address on the print and followed by other solutions on this forum. I was lazy to lift a question myself on this forum. Now, I'm totally frustrated and disappointed by this product, I wanted to just try my luck.

  Help, please!

  Thank you

  Fox

  Hey @Kvelrajan,

  Welcome to the Forum from HP Support.

  I understand your ENVY 4500 HP e-all-in-one printer is not printing documents to the end and there is a print quality problem when you print photos.  I would like to help.

  I have some suggestions that can solve these problems.

  First, I recommend that you only perform a "hard reset":

  1. press the Power button to turn off the printer.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer.

  Click on the title of the following article:

  HP printers - HP wireless built before 2010 printer print a partial Page or fails to print all Pages in Windows 8

  Try Solution two.

  If this clarify two questions, great!  If this solves the problem of document but still the problem of print quality with photos, click on the title of the following article:

  Printer prints a blank Page or does not print black ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series

  Work your way through the Solution one and go until you are satisfied with the print quality.  Test photo print - does clarify the issue of the photo?

  Please let me know the result of your troubleshooting by responding to this post.  Feel free to click on the "Thumbs Up" icon below, if I solved your problems.

  Have a great day!

• ENVY 4500 all-in-one

  any attempt to install downloaded WANT 4500 all-in-one driver software for Windows 8;  message that the drivers are installed but cannot print from the desktop; page State says printer is offline without a connection; can't activate step when the .exe file runs; Print and scan doctor diagnostic problem of software, but repeated downloads and re - installs fail

  Hi altoid1,

  Thank you for your answer!

  You are using a USB hub? Or connecting the cable directly from the printer to the PC (recommended)?

  Please, try the following steps:

  • Uninstall the printer software.
  • Re-install using this installation guide. Windows: "Device Setup has not completed" or the "Unknown device" Message appears on the computer during the Installation USB.

  If it gets stuck again, try other ports USB to the PC, if you have a.

  Hope to hear from you and have a great day!

• HP Envy 4500 All in one printe: copy problems HP Envy 4500

  The printer works well, but I can't do on my envy of 4500 copies.  When I press the 'Start copy black' or 'Start copy color' nothing happens.  I just replaced two cartridges with HP ink cartridges.  The scanner doesn't work well anymore.

  Hello

  Such a most likely occurs as a result of a problem with the scanning hardware.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971

  If the product of the repairs are needed to fill this form to contact HP support, be sure to select your region by clicking on the country of change:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

  Shlomi

• HP ENVY 4500 all-in-one: ENVY 4500 advance Options

  How to add or remove in the menu the paper size set in the Advanced Options screen?

  Hello

  You cannot delete but you can add custom formats. This can change when you change your computer, change OS, re - install the driver. Printer driver keep his list by default only.

  Kind regards.

• HP Envy 4500 All - in - One Print: missing 'Print & Scan' icon Envy 4500 printer

  When I scan to my PC from the printer control panel it shows only 'other' as the destination computer.  When I press on the help button (""? "") I can see my default printer without having to select 'Other' I am made to make this setting in the HP scan software.   Futher investigation I'm directed to a "Print & Scan" icon.  The problem is I have no icon "Print & Scan" and did I not any reference to the analysis in my HP printer Assistant I installed the latest drivers on the web, search the installation CD and can't find anything on how to get this icon to customize and preview my scans.  The scan fuction works fine otherwise.  I'd appreciate any help I can get with this configuration.

  Thank you.

  Hello

  I don't think that there is a "Print & Scan" icon. Anyway, please download and run the following tool. Hope to solve the problem for you or tell you what the problem is:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-141412-1/HPPSdr.exe

  Kind regards.

• Want to 4500 all-in-one: Envy 4500 scanner on the internet

  At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

  But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

  Is it possible to scan a document on the internet?

  My phone app it won't unless it is connected to the same WiFi network as the printer.

  Ric

  Hello

  IAM afraid to said that the analysis can be done on the internet.

  The Mobile/PC device should be on the same network for the scan to occur.

• HP 4500 all in one envy: HP Envy 4500 and el capitan

  Y at - it a update for the HP Envy 4500 all-in-one for El Capitan? Don't want to upgrade the operating system until there is one.

  Yes,

  The printer can be installed via Apple Software Update.

  Follow these steps to install its drivers via ASU:

  http://support.HP.com/IE-en/document/c04510394

  Then install the HP Easy Scan application that adds full functionality for your printer:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi

• Trying to network Envy HP 4500 all in one with OSX 10.9.4

  First time installation of HP Envy 4500 all-in-one happening on Mac with os x 10.9.4.  However I can't get the printer to work with cable. HP instructions were re - insert the CD and follow the instructions in the "reconfiguration without cable" However, this was not an option on the CD, he just tried to repeat the installation.
  Configuration of device through my Mac came wit this message-'device unreachable. woreless network settings were downloaded successfully on your device.  However your mac could not locate the device on the network. »

  There is no point of me having the wireless option if it is necessary to have a cable connection.  Please can someone help me with this last step to equip themselves.  Thank you very much.

  Hi thanks for Jamieson, for getting back to me.  We have now resolved the issue - '' We '' being myself and mark of the HP support team.  I tried all methods mention you several times and uninstalled, re-installed updates 3 times on etc. before contacting the forum.
  Finally, we found that the software of the printer was responsible and don't not all parameters.   Mark used Remoting to clear the printer software and start again and now it works a treat.   On the negative side I lost 8 hours of my time, not wanting to not give up the printer when we realize now it was never going to work. On the rise, Mark has been absolutely fantastic to talk me through the process of correction and the end result is a satisfied customer.  I also subscribe to e-print, which will be extremely useful to me in my travels

  

• HP Envy 4500 al in one: scan of a single document

  Hello

  I just got this HP Envy 4500 all-in-one printer/scanner, but am wondering how I can scan pages into a single document. It does not show the option to create a document. Read a lot to solve this problem, but only from your time. Mac OS X 10.11 El Capitan.

  Everyone as a solution for this?

  Thank you!

  Hi @Astraios,

• Want to 4500 All in One Printer: Envy 4500 and Photo paper

  Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

  Hi @kpdevlin,

  Welcome to the Forums of HP Support!

  I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

  Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

  Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

  In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP 4500 All in One Printer

  Is HP 4500 all in one model SNPRC-0902-01 wireless, that is, has wireless capability.  It is currently connected to my Windows 7 computer with a USB cable.

  Only the G510n is wireless.   Your printer has an Ethernet connection at the back?

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd

  I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer today and have yet to open the box, but I wanted to know what OS is better and how I would go about updating Windows 8.1 must be optimal. My computer specs are below:

  • 64-bit Windows 8
  • • 3rd generation Intel® Core™ i7 - 3770S processor [3.1 GHz, 8 MB of shared cache]
  • • 1 GB NVIDIA GeForce GT610M [DX 11, 3. 0a MXM]
  • • 12GB DDR3 1600 MHz SODIMM [DIMM 2]
  • • 2 TB 7200 RPM SATA Hard Drive
  • • Microsoft Office Trial

  Thanks in advance for your suggestions and help!

  Create a recovery disk set before even considering the upgrade.

  If you are not yet accustomed to Windows 8, then give yourself a little time to get familiar with before committing to an upgrade to Windows 8.1.

  I prefer the upgrade of Windows 8.1, in particular the return of the Start button, it is not the same as the Start button was before Windows 8.

  Important factors for Windows 8.1 are available on the web support download portal for your PC.