HP Envy 4500: Cannot print Photos and large documents on my HP Envy 4500 all-in-one printer

Hello

I bought my Hp Envy 4500 all in November last one. It worked like a charm for the first 2 months. I tried to print photo 4 x 6 a day. 2 first impressions were good, and the third image has begun to fade from the half. Documents not threatened by more than a few pages. I tried to uninstall/re-install, printing via USB, set static IP address on the print and followed by other solutions on this forum. I was lazy to lift a question myself on this forum. Now, I'm totally frustrated and disappointed by this product, I wanted to just try my luck.

Help, please!

Thank you

Fox

Hey @Kvelrajan,

Welcome to the Forum from HP Support.

I understand your ENVY 4500 HP e-all-in-one printer is not printing documents to the end and there is a print quality problem when you print photos.  I would like to help.

I have some suggestions that can solve these problems.

First, I recommend that you only perform a "hard reset":

1. press the Power button to turn off the printer.
2. unplug the power cord at the back of the printer.
3. wait 60 seconds.
4 reconnect the power cord to the back of the printer.
5. press the power button to turn on the printer.

Click on the title of the following article:

HP printers - HP wireless built before 2010 printer print a partial Page or fails to print all Pages in Windows 8

Try Solution two.

If this clarify two questions, great!  If this solves the problem of document but still the problem of print quality with photos, click on the title of the following article:

Printer prints a blank Page or does not print black ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series

Work your way through the Solution one and go until you are satisfied with the print quality.  Test photo print - does clarify the issue of the photo?

Please let me know the result of your troubleshooting by responding to this post.  Feel free to click on the "Thumbs Up" icon below, if I solved your problems.

Have a great day!

Tags: HP Printers

Similar Questions

  • Want to 4500 All in One Printer: Envy 4500 and Photo paper

    Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

    Hi @kpdevlin,

    Welcome to the Forums of HP Support!

    I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

    Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

    Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

    In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP Envy 4500 All in one Printer

    Hello, I have a HP Envy 4500 all in one printer that is only a year and have had many problems with.  Recently, when I turn it on, it displays an error code; 0XB3F4F4F8. I have not found what means this error code. ? I tried to unplug and then turn on to get the Welcome screen, then it said error code and does NOT stop automatically. I have to unplug it to stop it. Any help would be greatly appreciated!

    Hi!, jenwad87:

    Refer to the HP printer... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/document/c00489814

    Please, contact with the help of HP, of... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/troubleshooting

  • HP 4500 all in one envy: HP Envy 4500 and el capitan

    Y at - it a update for the HP Envy 4500 all-in-one for El Capitan? Don't want to upgrade the operating system until there is one.

    Yes,

    The printer can be installed via Apple Software Update.

    Follow these steps to install its drivers via ASU:

    http://support.HP.com/IE-en/document/c04510394

    Then install the HP Easy Scan application that adds full functionality for your printer:

    https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

    Shlomi

  • HP Envy 5535 all-in-one: I have a HP Envy 5535 and cannot scan multiple documents in a PDF file to send it in an e-mail message.

    I have a HP Envy 5535 all-in-one printer. I tried for a month now, to be able to scan multiple pages into a single PDF to send all documents in your e-mail.  Nothing works, I do not see even a place to choose. I work on an Apple I Pad2.  I appreciate any help you can give me.  Thank you!

    Sunshyn2005... Thank you very much, I didn't even know that there is this type of app.  I will try.

  • Want to 4500 all-in-one: Envy 4500 scanner on the internet

    At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

    But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

    Is it possible to scan a document on the internet?

    My phone app it won't unless it is connected to the same WiFi network as the printer.

    Ric

    Hello

    IAM afraid to said that the analysis can be done on the internet.

    The Mobile/PC device should be on the same network for the scan to occur.

  • Trying to network Envy HP 4500 all in one with OSX 10.9.4

    First time installation of HP Envy 4500 all-in-one happening on Mac with os x 10.9.4.  However I can't get the printer to work with cable. HP instructions were re - insert the CD and follow the instructions in the "reconfiguration without cable" However, this was not an option on the CD, he just tried to repeat the installation.
    Configuration of device through my Mac came wit this message-'device unreachable. woreless network settings were downloaded successfully on your device.  However your mac could not locate the device on the network. »

    There is no point of me having the wireless option if it is necessary to have a cable connection.  Please can someone help me with this last step to equip themselves.  Thank you very much.

    Hi thanks for Jamieson, for getting back to me.  We have now resolved the issue - '' We '' being myself and mark of the HP support team.  I tried all methods mention you several times and uninstalled, re-installed updates 3 times on etc. before contacting the forum.
    Finally, we found that the software of the printer was responsible and don't not all parameters.   Mark used Remoting to clear the printer software and start again and now it works a treat.   On the negative side I lost 8 hours of my time, not wanting to not give up the printer when we realize now it was never going to work. On the rise, Mark has been absolutely fantastic to talk me through the process of correction and the end result is a satisfied customer.  I also subscribe to e-print, which will be extremely useful to me in my travels

  • ENVY 4500 all-in-one

    any attempt to install downloaded WANT 4500 all-in-one driver software for Windows 8;  message that the drivers are installed but cannot print from the desktop; page State says printer is offline without a connection; can't activate step when the .exe file runs; Print and scan doctor diagnostic problem of software, but repeated downloads and re - installs fail

    Hi altoid1,

    Thank you for your answer!

    You are using a USB hub? Or connecting the cable directly from the printer to the PC (recommended)?

    Please, try the following steps:

    If it gets stuck again, try other ports USB to the PC, if you have a.

    Hope to hear from you and have a great day!

  • 4500 all-in-one suddenly it will print on the internet.

    I have a 4500 all-in-one who all of a sudden do not print on the internet. Except for the page number at the top and down the name of the site. It will display the word documents and pages of e-mail. My system is win7 64 b. printer is about two years old.

    I am running ex9. But is not serious, I ran PC cleaner and that solved the problem.

  • HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit

    After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.

    The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.

    The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.

    There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.

    Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.

    I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.

    I also tried installing HP Printer Wizard. The result is similar.

    Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.

    Thank you

    Dear Rainbow 7000.

    Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.

    The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?

    After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.

    This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.

    It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.

    Thanks for your help, and I hope this will help other users.

    Have a happy new year.

    -------------------------------------------------------------------------

    Screenshot of the name of the installer:

  • HP 4500 All in One Printer

    Is HP 4500 all in one model SNPRC-0902-01 wireless, that is, has wireless capability.  It is currently connected to my Windows 7 computer with a USB cable.

    Only the G510n is wireless.   Your printer has an Ethernet connection at the back?

  • HP Officejet 4500 all-in - One Printer - G510g will not print * sends an e-mail to yahoo my Yahoo or att.

    Win 7. HP Officejet 4500 all-in-One Printer - G510g does not print e-mails generated by yahoo my Yahoo or att.

    * prints the header only. OK, Juno & Hotmail prints. Have tried to reinstall the software to print, etc..

    Thank you

    Com63

    I'm sorry you have a problem with the printing of Yahoo.

    See if you can print from another program, such as, (firefox, Safari, etc.).

  • printers HP envy 120 all-in-one series

    I recently bought a hp envy 120 all in one printer and when I unpacked and took a look at the cover glass, there was what appears to be a filament in the middle of the cover glass. I tried to find pictures of the cover line, but not conclusions real photos that show this kind of detail or not, that's the way it should be. I have not tried to implement.

    Hello MbbGirl-

    I have a 120 in my office. I took these pictures to show you what she should look like:

    I tried to get more pictures, but could not. The cover glass on mine is clear.

    I hope this helps.

    Can you send me a picture?

  • HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

    Stampante Ho Una HPofficejet 4500g510g,.

    by the prima volta ho usato stessa cartucce Originali my ricaricate...

    Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

    Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

    riceve i Comandi dal calcolatore, not li can...

    E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

    No Yes Cosa Posso fare...

    Hi @maryf78

    If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

    More details in the link below...

    http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  • HP ENVY 5530 All in One: what "Scan by means of the computer?"

    I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

    I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

    Thank you

    Dino

    Hello

    Thank you for using the HP Forums.

    Scan of the computer means "scan a document and send it to my computer.

    You will need to install the FULL features software and activate it before you can use.

    How to scan to computer

    Once you have installed the software:

    1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
    2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
    3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

    Scan to computer

    Hope that helps!

Maybe you are looking for