Similar Questions

• How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  This setting should be preserved, once you set it... so I'm not sure why you have to define every time...

  Then... Make sure that you put on ALL the tools of the art of logic in the preferences of LPX...

  Otherwise... you may need to reset the prefs of LPX... Put all the Tools Advanced again and the other preferences you have set... and see if that fixes things for you...

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do this.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you don't follow the instructions properly!

• HP Envy 4500: Repeat Printing Documents

  Hi all

  I have recently, in the last six months, plug a HP Envy 4500 series all-in-one printer as a gift for my parents. Apparently, he has a problem where it printed a document several times (despite asking only one copy) and will continue to print it whenever the printer is on.

  On my advice, my parents followed the instructions of RESUMES provided here , but it made no difference to the problem. My hunch would be to reset the printer, but of course the menu aboard is unvailable while it's printing. Someone has any advice on what to do to solve the problem?

  Many thanks in advance,

  D.

  Hi @Darius89,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 continually prints an earlier document that was printed. I'm happy to discuss this issue for you!

  Just to clarify, if you leave off the computer and turn on the printer, the printer still print the same document?

  Is this document something that has been printed from the computer? Or is it an alignment page perhaps?

  In the meantime, please try a hard reset by following the instructions contained in this message, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Hope to hear from you soon and thank you for posting!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• How to move a local network printer without having to reinstall the drivers

  Hello

  Is it possible to change a printer to a network printer on a local printer without having to reinstall the printer drivers?

  The computer on which the printer (a Lanier LP116c PCL 5 c) is currently connected [directly] is running Win XP.  It is a stand-alone computer without any connectivity; network, internet ect.   He has no printer drivers installed because the computer had been connected to another computer by using working groups and was able to print at the Lanier through working groups.  But now that there is no longer connected to the 'network', but rather directly connected to the printer, it will not be printed.

  I tried to change the properties of the driver to "tell the computer" that the printer is now connected directly however when I try to open the properties I: "printer properties cannot be displayed.  The print spooler service is not running.

  How to 'know the computer' that the printer is now connected directly without having to reinstall the dirivers?

  Thank you!

  Carrie

  You have two questions.  One is assigning the correct port for the printer and the other is fixing what is originally the print spooler service to not run.

  As much as I can give you guidelines on how solve the second problem, it will be much easier for you to uninstall and reinstall the printer (once the print spooler works again) that in order to create a "USB virtual port" which is what needs to be done unless the computer was once a printer connected by USB is installed.

  Often, but not always, an order print spooler is the result of a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If you have ever had (but retired) a Lexmark or Dell - badged Lexmark printer installed, the command "net start spooler" to step below may fail.  In this case, type the following line in the black command prompt window and then type the command "net start spooler" again:

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the =

  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Once the print spooler has started, click Start > printers and faxes, right click on the Lanier printer icon and select properties and select the Ports tab.  If you already have a USB connected printer installed on this computer, there should be a port named USBnnn.  If there is, check the box and OK your way out and your printer should now print when connected by USB.  If there is no USB port listed, then do the reinstall as explained in an Article.  The driver install package available here should create and install the USB port for you: http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/c30e/c30een.htm

• ENVY 4500: My printer ENVY 4500 guard disconnection (no WiFi)

  My ENVY 4500 guard printer disconnect sporatically. One minute I can print correctly, either the printer could not be reached. The printer status "the printer is not connected.

  This continues to be of all devices, not only my iMAC. I tried my laptop, my iPad, iPhone. Same story. When it fires, he died for all devices. I tried to reinstall the printer, tried to restart, unplug. Nothing seems to fix.

  If I print the report directly from the printer during this time, it says everything is connected and no problems found (see attached image).

  Then after awhile, like an hour or two later, all of a sudden the printer will spit on all the prints that were in the queue.

  I contacted support and they connected to the printer and reset some settings, and it started working, then a week later he did it again. She continues to do maybe once a week or more.

  I don't know what to do more. Anyone have any ideas?

  

  Hi @valiik,

  I wonder, have you tried to set a static IP address? Your HP printer static IP address assignment

  Please let me know.

• How to run the form directly without having to open the form designer

  Hello Expert:
  
  Normally I run Oracle Form designer and print button.
  
  is there anyway that I can run it directly from IE without going into the Forms Designer.
  
  or I fom.fmx and compile the form already, is anyway to make it work directly without having to open the form designer.
  
  or even when to call form.fmx or compile the form from asp.net
  
  I use the Oracle 10 g Forms Designer.
  
  Thanks in advance.
  
  Published by: user11403781 on February 4, 2011 13:14

  You can run a form directly from a browser, assuming that the HTTP listener is running. In the case of Developer Suite, this would be OC4J. So, follow these steps:

  1 locate and open this file: ORACLE_HOME\install\portlist.ini

  2. take note of the value for ' * Oracle Developer Suite HTTP port. " It will probably be something like 8888 and 8889 or 8890 or something similar.

  3. start OC4J using the shortcut created during installation. It will be labeled something like "Start an OC4J Instance". This will open a DOS window. Do not close IT. Leave this session BACK will end the listener.

  4 once OC4J has initialized (you will see "... initialized" in the DOS window) open a browser and enter the following (replace you with host name and port requested in step 2 and form):

  http://YourHostname:port/forms/frmservlet?form=C:\myForms\helloworld.FMX

  If you are not able to get OC4J to initialize and remain running, attempts to run a form will fail. Also, if your machine is not registered DNS you can have problems using the host name in the URL. Instead use 'localhost' or '127.0.0.1 '. For example:

  http://127.0.0.1:8889/forms/frmservlet?form=test.FMX

• The print is so small. How can define you default largest size print without having to click the icon on each page?

  The print is so small. How can define you default largest size print without having to click the icon on each page?

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• HP Envy 4500: Cannot print with the new Wifi

  I have a new Netgear09 router and everything connected correctly. My HP Envy 4500 wireless printer has been a success with the wizard, and I printed out the specs very well. My computer (Windows Vista) is connected to the Internet fine... but when I try to print a document from the computer it continually-error. What Miss me? I am able to print from my Ipad... but not the PC.

  Welcome to the HP community @Dmk3,

  I understand that you can't print from your Windows Vista system to your desire of 4500 from the evolution of your router. I would like to help!

  Try running the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me the results.

  Try to print again, and if there are problems or errors, please tell me what they say precisely and I'll read them for you! Also ensure that you are trying to print outs in addition to a program.

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• Print to PDF without having to enter the name of the file

  Hello

  I need to print (NOT of EXPORT) to PDF without having to enter the name of the file manually.

  Any ideas?

  See http://forums.Adobe.com/message/5224900#5224900#5224900 for more information

  Thank you Trevor

  straight form indesign, do not think you can. But if on windows, you can try with this: http://www.autoitscript.com/site/autoit/

• Discoverer URL - hide password without having to use the public connection

  Hello
  
  I would call Discoverer Viewer without having to expose the schema password and without having to use public connections. Is this possible? Disco Viewer is called directly from my application, with authentication and custom permission. I don't want to expose the reports to the public by creating public connections.
  
  TIA.
  
  Tamas

  Hello

  If you use a HTTP Post in your application to pass the URL of the Viewer to the discoverer server, then you can provide the password as a hidden input which is not visible to users.

  Rod West

• How can I configure a new TimeCapsule for an existing network without having to activate the internal networks?

  I tried to go in advance and choose "Add TimeCapsule to the existing network", but it keeps defaulting to 'add a new network '.

  without having to activate the internal networks?

  "Add TimeCapsule to the existing network.

  You cannot add a TC in an existing network, if there is.

  You must configure the TC for the network.

  It keeps default back to "add a new network.

  So, it's OK... The TC is part of an existing network or makes a new.

  You must connect to the TC network... either wireless or ethernet.

  However, you can manually configure the TC simply plug ethernet for example.

  See, cable using Time Capsule for Mac for backup only.

  The same can be done for the wireless... but a TC is really the bad device for backups if you don't have a network... It's cheaper, faster and more reliable by using a USB key.

• I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I was told that movies in the iTunes Store can be changed to include "iTunes Extras" if originally it did not come with extras. But there is a catch you get just the extras if you buy just the issue for the first time. If you have already purchased it, your version may not have the extras. This means that if you want the extras, buy the movie again.

  If you now get the Extras will depend on what the movie studio did for example if they have updated the version you have purchased, or replaced by a new version (which will be treated as a separate purchase): buy and play movies with iTunes Extras - Apple Support

• I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails. Also Microsoft Office Outlook often does not open without having to restart the pc. ___

  I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails.  Also Microsoft Office Outlook often does not open without having to restart the pc.

  Hi hound3101,

  Welcome to the Microsoft Answers community.

  a. you are able to install some other updates?
  b. do you receive error messages when you start Microsoft Office Outlook?

  If you have a problem only in the Office Update installation, then I suggest you to report your problem in the Office Discussion groups. If not, try download office update from the link below and install it in clean boot mode.

  Link to the Group Discussion Board: http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

  To enter the mode of clean boot of your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after starting the computer, install the update.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How to load DLLs passwordFilter customized without having to restart the server system.

  Hi all

  I created the CustomPasswordFilter.

  I'm CustomPasswordFilter.dll the System32 folder copy and do a registry entry to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa" update the value "Notification Packages".

  I want to CustomPasswordFilter.dll to work without having to restart the server system.

  Is it possible?

  Concerning

  Ashish

  Hi Ashish,

  You can ask your question in this link for better assitance:

  http://social.msdn.Microsoft.com/forums/en-us/category/windowsdesktopdev

  Also refer to:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ms721766 (v = vs. 85) .aspx

  It will be useful.

• How can I join an existing email, I have forwarded to my address to another email address, I want to send him without having to open the attachments

  I am trying to send a copy of an email to another email address. As I had deleted the email I forwarded your new to my e-mail and now I want to sent to another email address.  It has attachments with it and when I try to pass it on to the new address can not send it without having to open the attachments and I have to send it without doing it would be someone has any ideas please?

  You don't mention your e-mail program, but you probably have an option to forward as an attachment. Who will show new text until they open the attachment. Send it to yourself to test.