HP ENVY 4500 e - all - in - a principle: HELP! Can I use firewire-USB cable to connect the HP Envy 4500 for MacBook Pro?
Help, please!
I just bought a FANCY 4500 e-all-in-one printer for use with my MacBook Pro (OSX 10.7.5) during a trip. I use WiFi in the hotel.
I tried to connect printer and wireless laptop. It is not the case. Printer connects to the network. Mac connects to the network. The 4500 just want stands as a device when it is time to choose a printer.
I read all the posts proposed, searched the forum looked at HP printer support. I can't find any solution for when this message appears:
«ATTENTION more than an access point/router wireless was found which corresponds to your wireless network (SSID) name.» If this is not intended, your HP printer can connect to wireless wrong. To avoid this problem, change the name of your wireless network (SSID) to be unique.
"If you change the name of your network, you need to configure the SSID on all wireless devices to match your new network SSID".
I guess I can't rename the network name of the hotel's wireless, so I'm ready to go on the road to cable. Envy has a firewire port. My MacBook has just USB.
==> Se connect want 4500 and Mac via a USB-to-Firewire my best cable option to print while I'm in the hotel?
==> Or there, does anyone know a work around?
Thank you very much for your help!
Thank you very much for your answer.
Ah, Yes. The old Grasshopper see that it is just another form - Type B - USB port on the printer than on his laptop computer.
Why would I want to connect via WiFi to the hotel? Obviously because I was not think properly.
Thank you for your patience and response.
I click resolved when I print from my laptop.
First of all, he is out to buy a USB cable.
Tags: HP Printers
Similar Questions
-
All of a sudden, I can't print any web page. After the print command, he wants me to save a file in XPS, and I can't spend.
This has happened
Each time Firefox opened
Is a few weeks ago
In the print dialog box, change the selected Microsoft XPS Document Writer printer in your printer you want.
-
I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!
Hello
Make sure that the automatic duplex printing option is selected:
Enter the control panel > printers
Right click on the printer icon, and then click Properties (printer properties for Windows7).
Click the Device Configuration tab.
Make sure that the option allow automatic duplex printing is checked.
If there is no change, try to uncheck the print manual duplex option below, then check any change.
The terms may be a little different because my OS is not in English.
The front part / duplex must be placed at the bottom left part of the device Configuration dialog box.
Please let me know of any changes,
Shlomi
-
All of a sudden, I can't type data on registered forms. The purple bar above shows "Please fill out the following form. You can save the data entered in the form.
Program used to complete the form (I guess they are in PDF format)? OPERATING SYSTEM? Versions of both? Forms were filled before you save them?
-
got my office all messed up when I can't use one of my photos on my help desk!
I got my office all messed up where I can not post one of my pictures of my photos on my office could have something to do with the theme thing I don't know? I don't know what I did how to fix it thank you
Melinda
Are what OS you running.
You try to make one of your photos your background on your desktop? If so, follow the link below, it will give you the instructions step by step. If this isn't what you're looking for answer comes back with a better description of whats going.
It's for Win 7
http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper
-
To delete all tables in TT, how can I use cursor this way Timesten 11?
Hello
I want to delete all tables in Timesten, so I create a procedure like this, but it seems does not work correctly.
It seems cursor in not accurate Timesten with which in ORACLE. So we are looking for alternatives to do. Could you please provide your expert voice on it.
Thank you very much.
Like the following:
Command > create or replace procedure dropAllTables
> as
> CURSOR mycursor IS select table_name from user_tables;
> table_name user_tables.table_name%type;
> dropSql varchar2 (200);
> start
> Open mycursor;
> fetch mycursor into table_name;
> while mycursor found %
> loop
> dropSql: = 'drop table ' | table_name;
> immediately execute dropSql;
> fetch mycursor into table_name;
> end of loop;
> close mycursor;
> end;
> /.
Created procedure.
Command > exec dropAllTables;
8507: ORA-01001: Invalid cursor
8507: ORA-06512: at "TT. DROPALLTABLES', line 13
8507: ORA-06512: at line 1
The command failed.
How can I use cursor this way Timesten 11?It is the implementation of cursor close commit on in Timesten is the cause.
As the drop statements are internally auto-valider the transaction so it closes the cursor itself. So when the next time that you attempt to extract it is your "error cursor not valid."
Can you try this instead
create or replace procedure dropAllTables
as
CURSOR mycursor IS select table_name from user_tables;
table-name user_tables.table_name%type;
type t_row_collection is table of the directory index user_tables.table_name%type;
t_rows t_row_collection;
dropSql varchar2 (200);
Start
Open mycursor;
Mycursor fetch bulk collect into t_rows;
Close mycursor;
j in t_rows.first... loop t_rows. Last
dropSql: = 'drop table ' | t_rows (j);
immediately run dropSql;
end loop;
end; -
I just upgraded to Firefox 8 and so far I hate it. The biggest problem is that all the icons are just dark gray blobs, that I can't read. I don't know which version I was running before, but the arrow to the left and the "home" button and all the rest were bright and clear and readable. Now, I can't even read what is in the address window.
How to bring back the bright look?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
Try another theme of Firefox (Tools > Modules > appearance/themes):
- Firefox 3 theme for Firefox 4: https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox/
-
I have service pack 3 installed. Follow-up acvice on verification of protocols in case of problems, but they were all checked.
Save the file on HD and then read it - it works?
See you soon,.
Jerry
-
HP Officejet 4500 Desktop: MacBook Pro have to download HP printer without disk
I had my HP Officejet 4500 desktop for a while computer. We moved and I can't find disk is there a way to bypass the download using the disc?
Of course
Select the version of your operating system from the link below, and then devote the section driver and download the driver (if available), or follow the steps to stable the printer if the drivers for your operating system are not downloadable:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3919448&task=&
Kind regards
Shlomi
-
I was in every sense, within the taskbar and Start Menu properties and everything but for some reason it varies between afford all four and then not. I locked the taskbar, unlocked it, tried not by selecting all the others who are there and much more. Do anyone know how I can get them right here, they were there before, when I got the laptop, but a few months ago he started to play up. Best description is that one cannot be activated on, sometimes two at a time, sometimes I can only get the clock in the taskbar. It becomes a little irritating as when working on a laptop that is not plugged in you cannot tell how much battery you have left, or you can not see your volume control and must go through the menu and the accessories and the rigmarole when you do something important gets on my last nerve cords. Please help :(
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
Read all the info on the link above.
See you soon. Mick Murphy - Microsoft partner
-
"Select all" is grey so I can't use "contours".
I'm trying to convert a simple logo to a vector for printing t-shirts. When I did it years ago, I used the vectorization and he took sent to the printer and it worked fine, this time using the latest version of AI, the printer repeat this is not a vector, despite the use of vectorization.
Website says "place" the logo, use "Select all" and then use "contours". I can place the logo, but can not select all, I try alt A and just, it beeps at me.
HELP Please, I have until Monday to get this done.
Thanks in advance!
Angela
You can't see any detail for all the little blue boxes
I think that these 'small blue boxes' must be the anchor points on the path, although I can't see them clearly on your shot.
Of course, it will print OK.
-
All of a sudden I can't load my e-mail messages beyond the 41st msg
Three days ago my computer decided to stop loading my emails beyond 41. I have over 200 download now and whenever I try to send/receive, it loads the same 40 messages, and then stops on the 41 message and will not go beyond. I tried to restart my computer, everything in Vista update for current updates, nothing seems to help. Does anyone have a solution for me?
Thank you!You can try compacting and repairing the database (see www.oehelp.com/WMUtil/) and see if that fixes it. Or try to remove your e-mail account, close and reopen WinMail, and then add the back and see if that fixes it.
In otherwise, messages sometimes get incorrect on the mail server and block WinMail. The only way to get rid of it is to remove them from the server. So either try to go on your email provider's website and log in to your e-mail in this way and delete the message, or you can telnet to the server and delete (see http://techhelp.santovec.us/pop3telnet.htm), or contact your e-mail service provider and explain the problem to them and they can remove the specific message.
Steve
-
Out of the blue, suddenly I can not open my Windows Mail program. I use Windows Vista Home Premium. I get a message that might indicate that the disk is full. I did a disk cleanup and defragmentation, but this has not solved the problem. I don't know what else to try. can anyone help please? I know that I had a big enough deleted message box, but the message Compact utility seemed to work OK
Windows Messaging database is damaged. Run my Windows Mail utility and to compact and repair the database (seewww.oehelp.com/WMUtil/). See here:www.oehelp.com/OETips.aspx#3 as an antivirus software is the usual culprit in such circumstances.Stevewrote in message News: * e-mail address is removed from the privacy *... HII
Thanks for your links - that I tried but nothing worked. Free space on the C drive is 84 143 GB GB. Recovery drive D is 14Mo 5.99 GB.
I've been looking at other posts and it seems to me that maybe Vista using the recovery disk. I never touched this player that I thought it was for recovery only - so, how to, it is full?
The computer suddenly seems very slow and crashes a lot. It's a sudden appearance which has happened just after the problem to windows mail... Should I get a new computer?
-
I have Photoshop CS and when I tried to open it I got an activation screen that does not work. How can I get my program works?
Hello
Activation for CS and CS2 products now unavailable server.
In this case the best you can do is to install Photoshop CS2 at the bottom of the link with the serial number that is mentioned on the Web site
Error: Unavailable activation server | CS2, Acrobat 7, pass a hearing 3
-
HP ENVY 7640e: can I connect the printer with a USB cable in addition to the Wi - Fi
I just bought this printer and succeeded in setting up wireless. Can I now connect it using a USB cable? If the answer is 'YES', just make the USB connection, i.e. will be 10 Windows automatically adds the printer, or do I have to re - run the setup software and select the USB option?
I would like to have the possibility of having the two configurations available for me to pick, i.e. be able to select the wireless printer or USB printers.
Thank you.
Hello
The answer is Yes, you can connect USB and wireless. 10 Windows can install a generic driver for you to print but envy 7640 has many features, so you must install drivers to allow you to print and scan locally using USB and printer software.
You need to connect to wireless internet to be able to use its full functionality.
Kind regards.
Maybe you are looking for
-
How can I increase the video memory dedicated Satellite C660?
Hello I'm on a Toshiba Satellite C660 and I was wondering if it was possible to increase the minimum 64 MB dedicated video memory. I've got 1696 MB total available graphics memory and 8gbs of RAM.I have had a look in the BIOS settings but couldn't fi
-
Satellite Pro A110 PSAB1C: can't choose certain resolution external display
I have Pro A110 PSAB1C-GM60XE with Intel Graphics Media Accelerator (Controller graphic memory integrated Intel 945GM Chipset) running Windows 7 Enterprise.Graphics driver is up to date. We got 20 "external monitor wide screen HD.When it is used as e
-
Tecra S11 - 11G - external monitor flickers when the Wifi is enabled
I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio. If I turn the Wifi radio off and keep the laptop connected to the power sourc
-
I've had this computer for over 3 years and all of a sudden it says I need to activate my computer because it has not been activated. A reason for this?
-
shuffle problem <;. <;
Xperia Z2 lolipop latest version of music... the random mode on but instead of play next song on the album, he repeats the same song... tried a solution to remove the configuration data and restart phone but still the same problem any idea?