HP ENVY 4500 series [D37511]

Similar Questions

• HP Envy 4500 Series: Failure print

  HP Envy 4500 Series

  Recently installed above "All in one printer.

  Impressions on lazer standard copy paper OK but will not print on glossy paper HP?

  I tried to 180grm of 150gm paper weight. With the success of 'Hit and Miss' .

  I think it's a mistake of the printer, that is to say; resuming is not paper glossy!

  Re-inatalling instalation disk help?

  Any help wouild be appreciated

  Thanks for responding so quickly

  Re HP Envy 4500series

  Printer not feed or pick up paper HP clossy

  Tried 180g and 150g and double face HP Lazer bright

  Also tried to adjust the paper on the selection 'print '.

  Brian 26

• HP ENVY 4500 Series (network): scan negatives

  I have the HP ENVY Series 4500 (network) printer/scanner/fax machine and would like to know if it is possible to scan 35 mm negatives and save them as a digital file on my PC?

  Hi @jvtorto,

  Only scanners with a media support Transparent able to digitize 35 mm slides.  The Envy 4500 series does not include such a feature and therefore does not support the slide or negative scanning.

  You can consider a scanjet.

  Negatives and slides scanning

  You can use the link above if you get a Scanjet which scan negatives.

• 4501 envy: ENVY 4500 SERIES

  Mobile printer to another computer. Downloaded Envy drivers from this site. After the instalation, I get a message that the system is 32-bit, but the software is 64-bit and will not go further.

  plug on this state of site software for the 4501 want is 32 or 64.

  does not hace access to of the original CD.

  Any ideas?

  Hello @ARGaylord,

  I understand that you are unable to install the software for your printer Envy 4500 series on your computer running Windows XP. You install this file: EN4500_198.exe?

• HP Envy 4500/Series: Cablelink (Austrian cable service) / installation HP Envy 4500 series problem

  Hi, I have a new HP Envy 4500, and it does not connect to my wireless network. He sees the correct SSID (using WPA - PSK / TKIP or AES), but he will not join the network after providing the WPA key. Printing test results shows a FAILURE on > parameters - without filtering. I don't know if I use MAC filtering on the network, because I don't know how to check this on this modem.

  I am also unable to join using the WPS procedure. I tried with and without a USB connection. I have 5 other wireless devices on the network, which all connect without any problems.

  In addition, I put static IP details on the Panel after reading the HP forum where this problem was stated by setting just the IP address and no subnets. Still no connection

  The printer works via USB ok.

  I got it connected to my neighbors A1s wi - fi network.

  I have a new wireless network to cable and modem put cable in the last week connected to Cablelink. I have a new router Cisco EPC3940. I tried to restart, connection to WPS and wireless USB connected. Reset the printer and modem and tried with and without using a static IP address.

  I tried to reconnect to my neighbors A1 connection - success.

  I tried with USB lead-success

  I tried direct to print without wire-success

  I tried to share wireless USB by using HP software-failure

  I tried the HP PC don't doctor too - no available solutions.

  I have read and tried several fixes on the HP forum-no success

  The fault is clearly my printer connect to my cable modem wireless (or my printer connect to my wi - fi of Cablelink) like all other connection works!

  I posted at the end of a similar position, but did not respond. Help please.

  Carl

  I finally solved this problem after 2 weeks of trying everything! Based on the above comment from BH, I thought that I had to turn off my radio show from 5 Hz. My new router has prevented to me because of the way Cablelink run their software. However, I finally got access to change it. I disabled 5 Hz. I still have the invalid password! Then, I changed the predefined WPA WPA2. It worked. I turned on my 5 Hz back show, the printer is remained connected. I then changed back to WPA2 and immediately lost connection! I put it to WPA and it connected again! I did NOT change key wireless, he remained at 16 characters, just the level of security! It seems if I want my Envy NEW 4500 with UPDATE drivers on my wireless network, I have to REDUCE my password security, which comes by default with modems cable new with Cisco, and accept the WPA! The strange thing is my old Iphone 4 and my old Apple TV both connected without problem. Therefore more recent Iphone to my wife 5 c and our newest Samsung UHD TV. So why a NEW model of printer is sold in stores right now, not able to work on WPA2? I lost 2 weeks on this issue before the sort it! It works, but I'm not happy! Same HP UK failed to connect after 4 hours on their online chat and remote assistance online! I worked it out myself from the comment by BH! Thanks BH. HP POST PLEASE A REPLY ON THIS THREAD WHEN YOU FINALLY WRITE A SOFTWARE FOR YOUR PRINTER TO WORK ON WPA2. MAYBE YOU CAN EMAIL CISCO IN ORDER TO WORK OUT HOW TO DO THIS BETWEEN YOU.

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP ENVY 4500 SERIES: my printer does not print words

  each document I try to print from my laptop missing every word so that it is a blank status report also every word Miss page.the and other printable pages of the printer itself.

  Hey @azs1500,

  Welcome to the Forum from HP Support.

  I understand you have a print quality problem when you use your HP ENVY 4500 e-all-in-one printer.  I want to help you with this.

  In addition to the obvious problem, the printer is able to print other types of documents, such as pictures?  Alternatively, are you able to make the copy of the façade?  What operating system work?

  I found a HP article which may help you to improve your print quality.  Click here and work your way through the recommended solutions.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP envy 4500 series: series like 4500 hp does not print

  printer prints test pages simply awesome.

  When I try to print, page comes out blank?

  Help, please

  Thank you

  John

  Hi @jsk4224,

  Thanks for joining the Forum from HP Support for a solution to your printing problem.

  I understand that you use a HP ENVY 4500 e-all-in-one printer with a Chromebook and and print pages of test very well but work sent from the Chromebook fate in white. I would like to help with that.

  Here is a support document which can help with this question - printer prints blank Page or fact not printing black or color ink.

  Please let me know if that solves the problem, or if you need assistance.

• HP ENVY 4500 series: how to find back my double-sided printing my print setting option?

  HI, I have problems with printing double-sided. Double-sided printing option was available before but it dissappeared from the option, there were 4 options before but only one side and manual double-sided print were left. I can't seem to find where to make this option to return and I have urgent need for printing. I can't print the application pdf, word documents, online either.  IM using asus computer laptop with envy 4500 hp printer, please help me as soon as possible.

  The duplexer must be enabled in the driver.  Follow these steps: go to the folder, devices and printers, right-click on Envy 4500, printer properties, settings of the device, Installation Options, and then set it to the duplex unit installed, apply.

• HP Envy 4500 series printer all in one

  What photo paper setting should I use to print with metallic photo with my HP Envy 4500 printer paper to avoid the smear of ink on the images?

  Hi silverwolf55,

  Welcome to the HP Forums.

  I see you are trying to use the metallic photo paper when printing photos.

  Just to let you know, metallic photo paper is not supported with the HP printer.  If you want to try to use the metallic photo paper, I suggest affecting the Best quality level so that the printer prints slow page. This will reduce the risk of smears and streaks.

  Thanks for your time.

  See you soon,.

• HP Envy 4500 series: print 'Photo printing without borders' and 'best quality '.

  Problem: It only prints in the borderless Photo printing option.

  Text in black it prints appears in gray.

  It prints only in quality adjustment 'Best '.

  The test (after cleaning the print head) page shows the 6 colored rectangles but no black text.

  I cleaned the print head, uninstalled and reinstalled the latest version of the software.

  The cartridges are NOT original HP cartridges.

  Of course, color works fine.

  I replaced the black cartridge with a new one, twice.

  I can buy a new printer for the price of these replacement cartridges.

  Should I worry about trying to fix this problem or should I throw it out the window?

  In the here document troubleshooting steps can help solve the black print is not on your printer 4500 desires.  Note that when printing in paper mode Photo black cartrdige is not used because the black pigmented ink is not compatible with photo paper.  If the photo paper is selected the pritner will use color ink to print in black.

  My guess would be that you have a black cartridge faulty, not unusual for third party cartridges *.  You can try to mop up the printhead on a damp cloth.  A good cartridge would have a strong black ink spot.  You may be able to recover the cartridge by soaking the print head in warm water, nozzles down to the 1 "of water for about ten minutes.  After soaking, dry the electrical contacts and reinsert into the printer.

  * See http://www.buyerslab.com/products/samples/HP-Inkjet-Cartridges-vs-Refilled-Cartridges.pdf

• HP Envy 4500 series: series My HP Envy 4500 won't accept my password once I changed my wifi name.

  My printer does not accept my new password but it recognzes the new name of wifi but I can not get to accept the new password wiwfi

  Reset the printer to the default network.  Now run the wireless out of the façade Setup Wizard if there a.

• HP envy 4500: hp envy 4500 cannot print after upgrading Windows 10

  Does not work with windows 10. When the updated drivers will be available?

  I have downloaded and run EN4500_198.exe. Add a new printer via direct wireless.  I received the message that my printer has been installed. When I try to access the printer through the network, the printer is not found. When I do for the devices and printers, I see my printer with the following message: HPF734F1 (HP ENVY 4500 series) driver is not available.

  I can scan to my computer, just not printing. I'm lost.

  OK just figuredb out. had to remove the old printer definition Bundeskunsthalle windows 8.1. Once I did that, win dows 10 find the printer on the network and use it correctly.

  Thanks for all the help.

• HP Envy 4500: Can't swipe Mac computers

  I am trying to scan something to my computer for school and it keeps send me errors.  I need to fix this ASAP!  My computer is a Mac OS X 10.11 El Capitan. My printer is a HP Envy 4500. It keeps giving me these errors.

  Scanner communication cannot be established. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image.

  and

  HP ENVY 4500 series is currently unavailable. Please check if it is connected and turned on, or try again later.

  He has turned on and connected to my computer and I downloaded the HP and HP Easy Scan utility.

  Hi @ufohouse,

  Thank you for joining the HP Forums!

  I saw your post about how you can not scan computer with your HP Envy 4500 on Mac OS X 10.11. And I'm happy to help you!

  How is the printer connected, wireless or USB?

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer? Copy of Documents.

  What happens if you try to scan from Apple Image Capture?

  Figure: screenshot Image Apple

  

  1. Place the document or photo face down on the scanner glass, and then close the scanner cover.

     If your printer has an ADF (ADF), you can use it to scan multi-page documents at the same time. No pictures load in the ADF to not damage the photos and the printer.

  2. Open Finder , click OK in the menu bar, click Applications, and then double-click the Image Capture.

  3. Click on the name of your printer in the devices or shared list.

     NOTE:

     If that device software is not installed message appears when you select your printer, click on install, and then follow the instructions to complete the installation.

  4. Click on show details at the bottom of the screen.

     An overview of scanning opens, then change the following settings:

     • Scan Mode: select the scan bed or the automatic document feeder, depending on where you have loaded the original on the printer.

     • Type: scan as color, black and white, or optimized for text documents only.

     • Resolution: higher resolution produces better image quality using as many dots (pixels) per inch. A higher resolution increases the size of the analysis file. Use a higher resolution for scans with graphics or items that need to be the best details. If you scan a black and white text, higher resolution is not necessary.

     • Size: use a standard paper size, or select the use custom size option.

     • Scanning to: select the folder you want to save in analyses.

     • Name: type a name for the saved analysis file.

     • Format: select the type of file for analysis.

       NOTE:

       Select PDF or TIFF format, and then select the check box next to combine in a single document to save documents to multiple pages or multiple images in a single file. This feature is only available with these formats.

     • Image correction: click on the pop-up menu, and then select manual to display the color change options such as brightness and saturation.

  5. Click on scan.

     The scan records in the selected folder of the scanning to .

  Source: scan from a Mac (OS X).

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope hear from you soon!

• HP envy 4500 driver

  I just bought the HP ENVY 4500 and try to install the driver on OSX10.7.5. Whenever he comus by saying "the software for this printer is currently unavailable. Please contact the printer manufacturer for the latest version of the software. »

  I tried to download the software in several ways and it comes back with this message. Any help is appreciated.

  SoC

  Hi RobertCharnock,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 will not install on your Mac OS X 10.7.5, and I am happy to help you with this installation

  question!

  Please, try the following steps:

  1. Reset the printing system. Mac OS x: how to reset the printing system.
  2. Verify and repair disk permissions. 12.x disk utility: repair disk permissions.
  3. Re-install the software. HP ENVY 4500 series full feature software and drivers - 10.6 of Mac OS X v10.7, v10.8 v10.9.

  Hope it will be useful to you and have a great day!