HP ENVY 4500 Series (network): scan negatives

Similar Questions

• HP Envy 4500 Series: Failure print

  HP Envy 4500 Series

  Recently installed above "All in one printer.

  Impressions on lazer standard copy paper OK but will not print on glossy paper HP?

  I tried to 180grm of 150gm paper weight. With the success of 'Hit and Miss' .

  I think it's a mistake of the printer, that is to say; resuming is not paper glossy!

  Re-inatalling instalation disk help?

  Any help wouild be appreciated

  Thanks for responding so quickly

  Re HP Envy 4500series

  Printer not feed or pick up paper HP clossy

  Tried 180g and 150g and double face HP Lazer bright

  Also tried to adjust the paper on the selection 'print '.

  Brian 26

• 4501 envy: ENVY 4500 SERIES

  Mobile printer to another computer. Downloaded Envy drivers from this site. After the instalation, I get a message that the system is 32-bit, but the software is 64-bit and will not go further.

  plug on this state of site software for the 4501 want is 32 or 64.

  does not hace access to of the original CD.

  Any ideas?

  Hello @ARGaylord,

  I understand that you are unable to install the software for your printer Envy 4500 series on your computer running Windows XP. You install this file: EN4500_198.exe?

• HP ENVY 4500 series [D37511]

  I'm on a MAC on HP ENVY 4500 series [D37511] print. How to print grayscale? Adjustment instructions of the printer in the user's manual do not operate on MAC, nor do they work in the control panel of the printer, there is no Advanced menu the printer Optioins.

  Hello colettestp,

  Welcome to the HP Forums.

  I did some research on your question on how to print in black and white.  Please click on the following link which explains not only the path, but it also shows screen shots to help you.

  How to print in black and white?

  Please do not hesitate to write me again if you have other questions for worries.

  See you soon,.

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

  Dear support,

  I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

  I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

  My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

  Where can I download the (new) 10 Pro software for Windows?

  Please help me solve this problem.

  Kind regards

  Carmine

  Hi all

  now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

  Concerning

  Carmine

• HP Envy 4500/Series: Cablelink (Austrian cable service) / installation HP Envy 4500 series problem

  Hi, I have a new HP Envy 4500, and it does not connect to my wireless network. He sees the correct SSID (using WPA - PSK / TKIP or AES), but he will not join the network after providing the WPA key. Printing test results shows a FAILURE on > parameters - without filtering. I don't know if I use MAC filtering on the network, because I don't know how to check this on this modem.

  I am also unable to join using the WPS procedure. I tried with and without a USB connection. I have 5 other wireless devices on the network, which all connect without any problems.

  In addition, I put static IP details on the Panel after reading the HP forum where this problem was stated by setting just the IP address and no subnets. Still no connection

  The printer works via USB ok.

  I got it connected to my neighbors A1s wi - fi network.

  I have a new wireless network to cable and modem put cable in the last week connected to Cablelink. I have a new router Cisco EPC3940. I tried to restart, connection to WPS and wireless USB connected. Reset the printer and modem and tried with and without using a static IP address.

  I tried to reconnect to my neighbors A1 connection - success.

  I tried with USB lead-success

  I tried direct to print without wire-success

  I tried to share wireless USB by using HP software-failure

  I tried the HP PC don't doctor too - no available solutions.

  I have read and tried several fixes on the HP forum-no success

  The fault is clearly my printer connect to my cable modem wireless (or my printer connect to my wi - fi of Cablelink) like all other connection works!

  I posted at the end of a similar position, but did not respond. Help please.

  Carl

  I finally solved this problem after 2 weeks of trying everything! Based on the above comment from BH, I thought that I had to turn off my radio show from 5 Hz. My new router has prevented to me because of the way Cablelink run their software. However, I finally got access to change it. I disabled 5 Hz. I still have the invalid password! Then, I changed the predefined WPA WPA2. It worked. I turned on my 5 Hz back show, the printer is remained connected. I then changed back to WPA2 and immediately lost connection! I put it to WPA and it connected again! I did NOT change key wireless, he remained at 16 characters, just the level of security! It seems if I want my Envy NEW 4500 with UPDATE drivers on my wireless network, I have to REDUCE my password security, which comes by default with modems cable new with Cisco, and accept the WPA! The strange thing is my old Iphone 4 and my old Apple TV both connected without problem. Therefore more recent Iphone to my wife 5 c and our newest Samsung UHD TV. So why a NEW model of printer is sold in stores right now, not able to work on WPA2? I lost 2 weeks on this issue before the sort it! It works, but I'm not happy! Same HP UK failed to connect after 4 hours on their online chat and remote assistance online! I worked it out myself from the comment by BH! Thanks BH. HP POST PLEASE A REPLY ON THIS THREAD WHEN YOU FINALLY WRITE A SOFTWARE FOR YOUR PRINTER TO WORK ON WPA2. MAYBE YOU CAN EMAIL CISCO IN ORDER TO WORK OUT HOW TO DO THIS BETWEEN YOU.

• HP Envy 4500: Sharing network - delay of the printing press by day

  Have had HP Envy 4500 all-in-one wireless for about a year.  Two laptops in the printer on the part of the House. Problem is with one of the laptops. Print is often delayed-- a whole day! - or doesn't print at all. Sometimes restart printer will do the trick.  Most often, second user must send me the doc that he printed, and I print it without any problem. This delay - printing or not is with Web sites, word, google docs documents

  Hello there @Sharon_inSD ,

  Please see the response you had my colleague @Mrstenter on the link below and answer the answer with the results and the information needed to help you with the deferred printing problem you are faced with troubleshooting.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/long-long-delays-printing-to-HP-envy-from-shared-laptop/m-p/4683838

  Have a fantastic Friday

• HP Envy 4500 will not scan to the MacBook Air Yosemite 10.10.3

  My printer connects wirelessly with my MacBook to print. It seems perfectly fine copy.

  However, the scan will be get no MacBook computer a friend and scan to it and refuses to scan at mine. I tried printing via system preferences > printer and scanner, tried to remove my printer and add it again to the impression that tried to download drivers for Yosemite to find that the error in the application downloaded impression told me that airprint was not working and the scan could not be completed. On my printer, my computer was never seen on screen as one scan to. How to solve this problem?

  Hi @LSarah,

  Welcome to the HP Forums!

  I noticed that you cannot scan with your printer HP Envy 4500 on Mac OS X 10.10 Yosemite. I'm happy to discuss this issue scan for you!

  Please, try the procedure described in this guide, connection error shows then scanand let me know what happens!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP ENVY 4500 SERIES: my printer does not print words

  each document I try to print from my laptop missing every word so that it is a blank status report also every word Miss page.the and other printable pages of the printer itself.

  Hey @azs1500,

  Welcome to the Forum from HP Support.

  I understand you have a print quality problem when you use your HP ENVY 4500 e-all-in-one printer.  I want to help you with this.

  In addition to the obvious problem, the printer is able to print other types of documents, such as pictures?  Alternatively, are you able to make the copy of the façade?  What operating system work?

  I found a HP article which may help you to improve your print quality.  Click here and work your way through the recommended solutions.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP envy 4500 series: series like 4500 hp does not print

  printer prints test pages simply awesome.

  When I try to print, page comes out blank?

  Help, please

  Thank you

  John

  Hi @jsk4224,

  Thanks for joining the Forum from HP Support for a solution to your printing problem.

  I understand that you use a HP ENVY 4500 e-all-in-one printer with a Chromebook and and print pages of test very well but work sent from the Chromebook fate in white. I would like to help with that.

  Here is a support document which can help with this question - printer prints blank Page or fact not printing black or color ink.

  Please let me know if that solves the problem, or if you need assistance.

• HP ENVY 4500 series: how to find back my double-sided printing my print setting option?

  HI, I have problems with printing double-sided. Double-sided printing option was available before but it dissappeared from the option, there were 4 options before but only one side and manual double-sided print were left. I can't seem to find where to make this option to return and I have urgent need for printing. I can't print the application pdf, word documents, online either.  IM using asus computer laptop with envy 4500 hp printer, please help me as soon as possible.

  The duplexer must be enabled in the driver.  Follow these steps: go to the folder, devices and printers, right-click on Envy 4500, printer properties, settings of the device, Installation Options, and then set it to the duplex unit installed, apply.

• HP Envy 4500 series printer all in one

  What photo paper setting should I use to print with metallic photo with my HP Envy 4500 printer paper to avoid the smear of ink on the images?

  Hi silverwolf55,

  Welcome to the HP Forums.

  I see you are trying to use the metallic photo paper when printing photos.

  Just to let you know, metallic photo paper is not supported with the HP printer.  If you want to try to use the metallic photo paper, I suggest affecting the Best quality level so that the printer prints slow page. This will reduce the risk of smears and streaks.

  Thanks for your time.

  See you soon,.

• HP envy 4500: upper part scanning but the lower part of the older scan

  Hello

  I need an explanation of what could of happened to cause this problem.

  I've scanned 4 cheques, but only the upper part of the cheques would be real, the lower part was released as a previous check scanned.

  So basically all 4 cheques are the same except for the date and sequence number which was the upper part.

  That's happened? I'm so confused.

  Thanks in advance

  Hi sandra_s,

  You are welcome!

  Yes, most likely a connection problem, or a driver conflict. One of the two could be the cause of the software behaves the way that you describe.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• HP 4500 ENVY: envy 4500 save a scan to word

  I bought HP ENVY4500 e-all in one. I would like to ask if I can save as .docx files

  Thank you

  Hello

  You will need to purchase an OCR software or try the next option:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Kind regards.