HP envy 4502 not connect to the printer

Hello, I bought the HP envy 4502 for College this fall semester. My apartment complex has free WiFi and lets my computer and laptop to separately connect to free wifi. I have first installed my printer that I was instructed to do. Then, when I download the installer on my computer it downloads perfectly. However when I move 'install' on my computer my printer is not found. I went to Wal-Mart, thinking that if I bought a USB cable, it would solve my problem. I plugged in the computer and the printer with the USB and printer 'ENVY 4500 series' has been designated now connected via USB. Now, the next step was to configure the device. My printer is not set to join the wireless network. "The device is not accessible. My Hp product registration was a success, however, I forgot to add my HP printer connected account. I looked on other forums, and because I live in an apartment the IPS are slightly different because the wifi is used throughout the complex. When I manually setup wifi with the same ip addresses, connectivity still does not. I really need your help. I paid a lot of money for this printer wireless and school starts soon. I need this printer! I downloaded the latest driver. I have Mac OS X 10.8.5. Also is it possible to use my printer as a wired printer wireless with my USB cable?

Hello

I haven't used a MAC in 10 years so I can't help you with MAC issues.  Your PC has a USB 2 port, so you should be able to connect the MAC to the printer using the USB 2 cable.  Follow these instructions.  There seems to be a lot of warnings I have gottcha.

Tags: HP Printers

Similar Questions

  • Computer does not connect to the printer epson stylus CX3810.

    Original title: computer will connect to the printer because the loader program does not list the stylus CX3810 epson and I can't find a few good sub. The printer worked ok before two days ago.

    Can not recharge my Epson stylus CX3810 because it is not listed in the list of available printers. It worked fine yesterday.

    Hello

    1. what operating system is installed on the computer?

    2 have you made any changes to the computer before the show?

    Method 1: Uninstall and reinstall printer

    See the following article:

    Install a printer

    http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

    Method 2: Because it worked yesterday, you can restore the computer to a date where it worked fine before.

    Reference:

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  • HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

    Hello

    I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

    Sincerely

    Hello metehangunaydin,

    Please try the procedure below so that you can at least be able to print.

    1. click on the Start button on the computer.
    2. then click on Control Panel.
    3. then printers and faxes
    4. in the top left, click on add a printer
    5. click Add a local printer
    6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
    "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

    Now try printing. It should work.

  • Satellite C660 now does not connect to the printer via Bluetooth

    I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

    Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

    Any ideas of solution?

    Hello

    From this point it's hard to say what's wrong.
    In my opinion, you must reset all settings and configure the connection to the printer again.
    Reinstall the software that you have installed in the past.
    Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

    Since your laptop can connect to the internet properly, it cannot be a laptop problem

  • series 0: could not connect to the printer virtual daemon after 25 attempts

    I get the error message that the virtual printer daemon can't connect whenever I start the guest system and I can't get my printer to work from Windows.  He used to work when I first set up my VM.  Any suggestions on what this means and how to fix it?  I'm on Mac OS X 10.5.6 on a MacBook Pro and have Windows XP Home Edition on the virtual machine.  Also, when the printer works on the virtual machine, it still required me to disconnect, and then reconnect the USB connection to make it work.

    If you Search the forums for "Failed to connect to the virtual after 25 attempts printer daemon", the first result from that moment is Re: unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The unit will cut'. In this thread, mudaltsov follows the problem down to one/etc/printcap needless - move which should solve the problem.

  • Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

    My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

    Ruizgeraldine

    Hello;

    Let me welcome you on the HP forums!

    I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

    The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.

    I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

    You must download and install the full feature software and drivers for the printer.

    Then unplug the printer and install the software.

    Do reconnect the printer until the installation program invited to do so.

    Once the installation is complete, restart.

    You should then be able to use your printer in Win10.

    Good luck

    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
    Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
    ========================================================================

  • Photosmart 6520: printer is fine but the scanner will not connect to the printer

    Since the update to windows 10 my printer works fine, but my scanner is not connecting to my computer!  I tried looking for updates as suggested, but it goes on to say that he didn't... Please help its driving me crazy!  Thank you

    Hi @queenbee12,

    Looks like the scan drivers may not have been installed correctly. Please, try the steps in this document to see if it helps. Skip step 3, because it is the different software for your model. Let me know the results of step 5.

    HP printers - a Communication or connection error is displayed when scanning.

    In the workarounds section scan, try these applications to see what results you have.

    If the driver is installed correctly, you should be able to use the Capture and scanning HP.

    Please hold me. Thank you.

  • Computer will not connect to the printer over the network. How can I configure the fax as well?

    I'm new here and just beyond frustrated trying to get this to work for my office.

    My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

    My printer is HP Officejet Pro 8600 all-in-one

    I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

    I'm confused! Help someone! Please, I beg you!

    Hi ahagereo,

    To connect the printer to your network, follow the steps outlined in the document below.

    http://support.HP.com/us-en/document/c02886889

    Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

  • MacBook can not connect to the printer by wireless B110

    Hello

    Whenever I have enable WPA or WPA2 on WiFi security, my Macbook will not be able to print/scan to the B110 printer via wireless network, if I can access the printer with the IP on my browser and scan from the web interface. The PC in my house has no problem. In addition, my Macbook can print/scanning to the printer without any problems if no guarantee is enabled for the wireless network. What is the solution?

    I tried all the suggested solutions, including resetting the printer to the pref, uninstall the HP software, but in vain.

    Config:

    Mac OS X 10.6.6

    Updated to the latest HP printer driver (version 3.2)

    Router: A level WBR-6011

    Thanks a lot for your help!

    Richard

    It is a router that is provided by your ISP?  What is a DSL or FIOS service?

    If so, we will reinstall the printer this way:

    -Unplug the Internet line, which runs between the router and the wall
    -Cut the power to the router, wait 30 seconds, then turn on the power.
    -Go through the normal process of the printer connected to the router.
    -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
    -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter your router's IP (its on the self test print) in the entry door and the first DNS field, leave the second blank.

    -Click 'apply '.
    -Finally, plug the Internet line, restart the router and the test.

  • Computer laptop Chromebook does not connect to the printer HP Officejet Pro 8610 range

    Hello! I have a few problems with the connection from my laptop to my printer to print documents!

    I have connected my printer to my wireless network, but do not understand how to connect my laptop to the printer!

    I don't have a disk drive with which use the installation disc in and the site that gave me to visit "hp.com/eprint/OJPro8610" shows me a 403 forbidden error message to ask. Can someone help me please? It is worth mentioning that I am not too good with computers, you may need to treat me like a little baby to make sure I know what you're talking about.

    My laptop is an Acer C720 Chromebook

    My printer is a HP Officejet Pro 8610

    Please hep me. Please, I beg you.

    Hello

    You need the following application:

    https://support.Google.com/chrome/answer/1069693?hl=en

    Please select the option #1

    Kind regards.

  • HP Laserjet P3015dn: P3015dn pilot will not connect to the printer

    Hello. We provide that HE supports for a number of hotels, and for about a month, we had problems with a number of printers P3015 different properties not being not able to print. This is shared through Windows 2008 R2 servers network printers. The problem when the drivers are installed directly on the computer of the user (Windows 7 Pro).

    The printer is connected and accessed via a web browser. When a test page is sent, no data seems to go to the printer. There is no error in the printer event log. After awhile, an error is displayed for the printer in "devices and printers". There is no specific error given.

    The installed driver is universal PCL6 because there is no specific driver for this printer.

    I would like to know if it is a common mistake that has resurfaced recently. For the moment, we have this problem in 4 separate hotels. P3015s most are a few years old but is new and still under warranty.

    Update: installing drivers PS does not solve it either.

    One of my colleagues managed to solve the problem of despair. Seems the printing services for the port has been disabled on printers. 4 printers in 4 different sites. Don't ask me how it could happen, but that's all you need to do...

    ENABLE 9100 IN MAMT. PROTOCOLS

  • Laptop will not connect to the printer

    Hello.. I tried several of the suggestions in this area, but none seems not to work. I have problems with the laptop (HP Pavilion) running vista 64-bit. The main computer which is where the printer and modem are connected is on vista 32 bit. I thought it was a problem of... downloaded driver download drivers 64 bits to LEXMARK (p4350). Downloads, starts the process of intstallation, she can never finish the installation as iI comes to a point where I change the local port to the printer-name of computer name... Then, he goes in the wizard and asks the printer... It does not appear in the list, and I try to go in the C\drivers\folder. (ect.) where the new download is installed. Always get the .inf file cannot find... I still see that the printer in the network-it just keeps giving me the error... The server for the lexmark no has not the correct driver... takes back me to the previous step... It's driving me crazy... have spent countless hours trying to understand. any help?

    Hi sandielez3

    You can download and install the firmware update and then reinstall the printer with the driver Windows Vista driver.

    Before you install the driver, please uninstall the driver exist.

    Remove the printer

    1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.

    2. find the icons that are associated with the printer, and then remove them.

    3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

    4. on the tab drivers, select the printer listed and click Remove. Please, select Remove driver and driver package.

    5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

    6. try to remove all related printer software.

    Reinstall the driver. After that, follow the steps below.

    Add a shared printer

    1. click on start, click on Control Panel and double-click Printers.

    2. the keyboard, press Alt, and then click the file-> run as administrator-> add printer.

    When the UAC window appears, click on continue to go.

    3. Select "add a local printer.

    4. Select create a new port ". Select "Local Port" as the port type.

    5. in the "Enter a port name" box, type the address in the following format.

    \\[IP address of the host computer]------[the share name of the printer]

    And then click Next.

    6. follow the instructions to complete the installation. During the installation, when you lorsque vous etes are invited to choose a good driver; Click the "disk".

    7. navigate to the file .inf. click OK.

    8. wait until the process ends.

    If the problem persists, the driver may not work with shared printers. I suggest you contact Lexmark technical support and confirm if there is a problem in their drivers.

    http://www.Lexmark.com/Lexmark/sequentialem/home/0, 6959, 204816596_689444666_0_en, 00.html

    Please visit these links to learn more:

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • wireless printer is not connected to the printer

    I have a HP deskjet 3050 J610.  I recently changed the SSID of the wireless and now I can't print by saying that it is not connected.  I tried to go to the printer and press setup, but the network does take one to match the SSID name.  the wireless network test report says the wireless is on and working but theSSID found name failed.  There are 3 detected networks.

    You don't need the CD, just read this web page and click on each tab to see what's there.

  • I have a fish snap account, but I can not connect to the Print Center e

    I am trying to create a newspaper in Print Center e I bought an officejet 8600, I winked fish account how I link them together.

    Thanks for your help,

    Erik

    You will use your information to Snapfish for ePrint newspaper, and if you get wrong to remember that or if you want to change any of this information, you can do so through Snapfish that will transport you to the thread at ePrint.

    You may need to do this anyway in case the password for Snapfish is not strong enough for ePrintCenter.

    Let me know! Happy new year!

  • Just bought a HP 6500 e has and a computer (windows 7) could not connect to the wireless printer

    My new printer is not recognized by the network wireless in my computer (Windows 7). USB print ok

    The printer seems to be connected to the network, but my computer is not connected to the printer. It will not print on request. The print project going on in Quebec but will not communicate with the printer wirelessly. If I plug in the USB it will print.

Maybe you are looking for

  • Complement of cadastre

    I can not complete cadastre Itunes, try include banco meu e IBAN o ao o. NAO appears banco o na relaçao e oferecida had nao tenho a what do Itunes. Game me dar any suggestions. FIZ several tentativas.

  • installed on the new computer (Win 10); Bookmark icons disappeared

    I just got a new computer and installed the latest version of Firefox (04/09/2015) on this subject. I have synced my favorites since my previous machine, and everything is good except the icons for all of my favorites, are gone. I used the long, and

  • Matt Zen does not work

    I had to re - install Mozilla. Then I reinstalled mate Zen still too. Now Zen partner does not appear as an icon on the top right. It says it is installed, but it doesn't seem to work.

  • Group addresses not added when sending of e-mail - name of group only

    Just helping a friend use Thunderbird on a new PC with Win 7 Prof Previously used Outlook Express on Win XP. Downloaded latest version of Thunderbird. Old as any wab file suggested using "morefunctionsfor...". ». The old address book (full) has been

  • Qosmio G20 issue - Codec of Capture / Capture a bound program

    Hello guys and girls! Recently I bought the laptop Qosmio G20 102 and I am very satisfied with it because I found many flaws that annoy me in my work. Now, I am addressing those who might be kind enough to help me with the biggest problem of all. Pro