HP Envy 4504: AiO remote copy scan on film

Similar Questions

• HP Envy series 4520: cannot find Windows AiO Remote app store

  Hi all

  This is my first time in this forum. I'll try to find the HP AiO Remote app, but it is not in the Windows Phone store.

  I have a XL 640 Lumia.

  Hey @richo43,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the printing of your Windows Phone to your craving 4520 e - all - in - one - done. I can help you with that.

  First of all, the HP all-in-one App Remote is designed for iOS and Android devices. For a Windows phone, you will need to instead send emails to the address of the printer configurerais ePrint. To do:

  1. On the printer, click web services icon in the lower left corner of the screen.
  2. If you see an email address that is letters and random numbers, click on the gear and scroll to delete Web Services. Once completed, click web services icon again.
  3. Click on accept and Yes. The printer should print a page.
  4. Go to HP connected and sign in or sign up.
  5. Once logged in, click the devices tab.
  6. Click Add the device.
  7. In this screen, enter the code request on the sheet of paper printed earlier.

  Now, when you need to print from your phone, you will be able to send e-mails to the address of the printer. Everything you send is print.

  Please let me know if you have any other questions, or have a great week!

  If this solves your problems, please inform other users by clicking on the Solution accepted under my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• HP Envy 4504: HP ENVY 4504 - replacement for the color cartridge/clip support securer

  Hello

  My first appearance on the HP forum and greetings to all.

  Inquiries regarding the search for a replacement part that broke, after contacting HP support the Australia I was told initially to send the camera in full back. I have sought clarification on the availability of the part which is the rose clasp/support that binds the cartilage holds print color printing to secure it in place.

  Unfortunately, due to the size of the photos that I took, I am unable to send you a picture of the caliper/clasp/Medallion.

  I have been informed that I cannot get this piece plastic small but essential and I should try to find a replacement elsewhere.

  I understand that some parts are difficult to find or even obsolete, but it's a recent purchase that I updated my previous HP printer, I only buy HP printers for my PC at home.

  Please help me to solve this issue, the printer/scan/copy/photos work perfectly, but I can't print in color.

  Any advice would be greatly appreciated.

  Concerning

  Colin Duffy

  [Personal information]

  Hi @CND63

  I understand that you are looking for a spare part for your HP Envy 4504 printer. I'm happy to discuss this issue for you!

  From what I can tell of our HP PartSurfer Web site, it is not a replaceable part. Please contact HP support phone for further assistance to repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Best regards!

• Want 4504: Hp Envy 4504 does not give the impression of color

  Hello

  My Hp Envy 4504 gives color impressions.

  Its keep giving only black & white or gray scale images.

  Also, I couldn't find the printing color profiles or presets under the printer settings.

  I only 'Black and White' and ' black and white - gray ' presets.

  What should I do to get the color print.

  I have two hp color and black ink cartridges installed.

  Help, please.

  Thank you

  Hi @sivak,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print in color on your HP Envy 4504 printer. I will definitely do my best to help you.

  You are able to print a test highlighted report? The printer prints a blank Page or does not black print or ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series.

  The problem only occurs when printing from Mac? It seems that there is a problem with the printer driver. Please see these instructions by my colleague Anti-double-U-di.

  Publish:

  10.10 yosemite, foot, make sure you have the latest updates, including Apple updates as well as updates from HP by Apple Software Update (ASU), currently HP printer software update Ver3.0

  Look for the updates (ASU) Apple
  1. click on the Apple in the left menu bar
  2. click on "about this Mac".
  3. click the button of "software updates... »
  4. make sure that the "Updates" icon is selected, click on 'Store' in the top menu
  5. click on 'reload the Page.
  6. install the HP updates (look for the last 'HP Printer Software Update"by the version number)

  Note: If you can't print or scan if he is an all-in-one HP printer, and then follow the steps below.

  Delete the print queue HP printer
  1. click on System Preferences
  2. click on printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm
  
  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  Try to print in coiour.

  If the steps above resolved your problem, you don't have to continue troubleshooting.  If you're still having problems, please continue to the next step.

  Before continues, the following steps will remove all printers to printers and Scanners, you may need your software and drivers for the printers to re - install if it is not part of the Apple software updates.

  Reset the printing system:
  1. open System Preferences
  2. open Printers and scanners
  3. on the left side where would be referred to as printers, right click and select "reset printing system...". »
  4. click on the "Reset" button when asked to confirm
  5. Enter your password, and then click OK (if prompted)
  6. Once completed, (notifications cannot pop up) you will simply see the Virgin 'printers & Scanners', just close

  Remove the software from HP/Hewlett-Packard:
  1. go on 'Finder '.
  2. go in "Applications".
  3. Locate and open the folder "Hewlett-Packard".
  4. If you see an "Uninstall HP program" listed here then run the uninstall program, otherwise, go to step 8
  5. click on the continue"" button.
  6. Enter your password, and then click OK (if prompted)
  7. When you are finished, click "exit".
  8 remove the HP folder or Hewlett-Packard (if still listed after uninstall) drag the folder to the trash
  9. right click on the Recycle Bin in the dock, click on "Empty" - and then confirm to empty the trash

  Repair disk permissions
  1. in the Finder, click Applications
  2. open the Utilities folder
  3. double-click on the disk utility
  4. on the left side, click on the hard drive which has Yosemite 10.10 installed to highlight
  5. click on the "repair disk permissions" nearly half lower the window (time may vary to finish)
  6. what repairs completed, a message near the bottom window 'Fix full permissions', now you can close the disk utility
  7. click on the Apple in the upper left corner, click "Restart" to restart your Mac

  Manually the drivers of HP printer install v3.0
  1. this link will take you to the apples for v3.0 HP printer drivers download
  2. click on the button 'Download' (remember where your download is if your downloads are not on the dock)
  3. open the "HPPrinterDrviers3.0.dmg".
  4. double-click on the "HewlettPackardPrinterDrivers.pkg".
  5. click on the continue"" button.
  6. After reading the license agreement, click the continue"" button.
  7. click on the button "I agree" If you agree
  8. click on the drive that Yosemite 10.10 is installed on and click on continue
  9. click on the 'Install' button (this will install the drivers for HP to your Mac)
  10. Enter your password, and then click the button 'Install Software' (if prompted)
  11. click on the "Close" button when the message "installation succeeded."

  Add a printer to print the queue
  1. open System Preferences
  2. open Printers and scanners
  3. click on the symbol ' + '.
  4. click on "Add a printer or a Scanner..." »
  5. click on "HP Envy printer 4504.
  6. click on the drop down menu to "use:" and choose "HP Envy 4504 Series."
  7. click on the ' Add ' button.

  Try to print in color.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet 6700 Premium: IHP AIO Remote app does not connect to my printer.

  Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the

  the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop

  Wally

  Hello @wwwally, greetings!

  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.

  I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to http://hp.care/2bUVkrw to download and install HP Scan and capture the app.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• printer Envy 4504: envy - 4504 printer

  I just bought a HP Envy 4504. the first document I sent to the printer has been a problem.

  the paper continues to print without interruption. more than a 100 pages should be printed. There is a botton cancel on the printer Panel, but pressing it doesn't make any difference. no other print jobs print only the first task that has been sent to the printer.

  are there any action on the computer screen that I can go to cancel printing or to see the queue?

  Hey @paul-anthony,.

  Welcome to the Forums of HP Support!

  I would like to help you today with this copy multiple print jobs which continues to print from your HP ENVY 4504 e-all-in-one printer.  However, in order for me to provide you with a precise support today, I must say if your printer is connected via a USB Câble connection or the network connection to your computer Windows 10?

  What is important is because it will help us to identify this problem. If networked, the router can constantly send the signal 'print' your printer to print several times that the job. If USB connected, the print job may be "stuck" in the print spooler on your computer and which is the cause of print without interruption. The print spooler is the printing system integrated into Windows computers. It controls all of the printers for printing, regardless of the brand or model. The print spooler to be corrupted, impression of the problems, as you are having, can occur.

  NOTE: To cancel the print jobs to the computer, if a print job in the print queue you will see the printer icon on the task bar of your computer down at run time. Double click on this icon to view the print queue and cancel the job manually. If no icon print, open devices and printers. Right click on your HP Envy. Left click on see what's printing. The print queue is now open.

  For now, please power OFF your printer. If networked, can you please disconnect the power cable from your router. If connected via a USB cable, please unplug the cable USB from the printer and the computer.  Once disconnected please follow the steps below to ensure your computer's Print Spooler Service.

  • Step 1: Check print spooler:
  1. Click Start
  2. 'Ask Me anything' enter run.
  3. Click Run to launch the run dialogue box
  4. In the run box, type services.msc and click OK
  5. When the Services window opens scroll down until you see the print spooler
  6. Click Print Spooler once just to highlight
  7. If you Start in the upper left corner that indicates that your print spooler is actually stopped (not good). But we will leave that for now.
  8. If you stop or restart in the upper left corner, this indicates that your print spooler is actually started. Please click on stop to stop the service momentarily.
  9. Reduce this window which will allow us to come back here
  • Step 2: Check the spooler folder:
  1. Reopen your splash screen
  2. Computertype. Click on the computer (or on This PC) when it fills so
  3. In the computer window, select your Drive C
  4. Click on Windows
  5. Click on System32
  6. Click on the reel
  7. Click PRINTERS. You can get permissions to a warning, just continue beyond that.
  8. PRINTERS of the folder must be empty. If there is no file here, they are corrupt print jobs. Right click on anything in that folder and 'delete' files.
  9. Close the PRINTERS folder
  • Step 3: Start Spooler and audit dependencies: 
  1. Open the Services window we previously minimized
  2. Click print spooler to highlight
  3. Click Start in the upper left corner. If you get an error message please take note of it
  4. If the print spooler starts successfully you will see "stop and restart" as your options at the top left
  5. Close the Services box

  Once the print spooler has been started, please turn on your printer. Then, plug the router or connect the USB cable. The printer must stay in the ready state. If the printer is in ready state, please send a test print from your computer to your printer.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please specify how your printer is connected to your computer. I look forward to hear from you!

• HP envy 4500: hp envy will print but not scan

  I just got a new computer with Windows 10. I have no problems wireless printing to my HP Envy 4500. However, I can't scan from the printer or computer. I downloaded the HP scan and capture the app on my laptop. When I click on "capture the Photo" or "Document of Capture" in the application, I can hear the printer starts to scan, but then I get a "general failure". When I try to scan from the printer, the printer is "impossible to connect to the computer" (However, I am able to send something to print without problem).

  Then I connected my laptop via the usb port to the printer. When you try to scan from the printer, the printer is still unable to connect to my computer. When you try to scan from the HP app, it will sometimes (about 1 in 4 attempts), if I click on "Photo capture. However, it will never scan when I click on "Document capture. Getting a diagnosis of "General failure."

  I found the answer on another forum:

  Hi delphine,.

  The 5530 ENVY is very similar to the ENVY of 4500, and had a similar problem. Go to http://h30434.www3.hp.com/t5/Windows-10-Expert-Day-Printers-All-in-Ones/Copy-Scan-Inoperative/td-p/5304404 for a possible solution.

• HP Envy 7640: HP Envy 7640 does not copy the all-in-One

  I have a variant of other posts on this site.  My desire 7640 doesn't copy, either on the glass, or through the feeder directly but only if it has been idle for some time.  I get the message that it is scanning and paper feeds, but the wheel just spins and nothing to copy.  However, if I then turn off, restart and then try and copy, it works fine.

  I downloaded the drivers the most recent (February 3, 2015), so I think I am up to date.  Moreover, when I download the drivers, it seems to install on my Mac - that somehow 'transferred' to the printer itself?  The reason why I ask, is that if you copy something, there is no interaction with the Mac (that I know of) and I want to make sure that the printer has made more recent drivers.

  Any ideas?

  Thank you!

  Chris

  Hi @silgec,

  Welcome to the HP Forums!

  I noticed that your HP Envy 7640 won't copy. And I'm happy to see it for you!

  First of all, I would make sure that the printer power cable is connected directly to the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Then check that the printer firmware is up-to-date, browsing through this guide, get the latest Firmware and updates.

  Let's start with the following steps, and we will see what happens!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP ENVY 4504: Problem with HP ENVY 4504 and Microsoft Surface Pro2

  Today, I bought a HP ENVY 4504. It was easy to install wireless on my Medion desktop with Windows 8.1.

  However try to install it on my Pro 2 of Microsoft Surface, it does not appear in the wireless network environment. Trying to connect via USB, the Surface does not recognize the printer as a USB device.

  However, try to connect via USB to the desktop computer, it connects immediately.

  Disabled the firewall (Windows Defender) and antivirus (Avira) protection on the Surface: no solution.

  Tried the Scan doctor and HP printer. The software does not recognize the printer

  I checked that it is on the same network.

  Did you uninstall and reinstall the software drivers: no effect

  Something is blocking the printer in the Surface, but what. Never had or have problems connecting equipent at the Surface, not in wifi or USB.

  To complicate matters. My 5 Nexus on Lollipop 5.1 also refused to find the printer on the network. However, if I start a Wifi Direct terminal between the two, it works.

  I spent hours trying to solve this problem. Help, please!

  I found a solution to my problem myself.

  Turns out tha my router (Fritzbox) has a security feature that blocks the communication between devices connected wireless. It is enabled by default.

  A simple tickmark in box aside ' displayed below active wireless devices can communicate with each other "did the round (WLAN - security - additional security settings)"

  Now the laptop as well as my smartphone can see the printer/scanner

  The printer communicates wirelessly with the router, but the office is connected to the router. That's why it worked fine from the start.

  I hope my experience can help someone with similar problems, so my last night was not lost in vain

• HP Envy 4504: Printer prints well recognized by the computer

  Hello

  My printer does not print despite the right driver installed etc.  My computer recognizes the printer, and it is defined as the default value.  I used print and scan doctor several times without success.  It recognizes the printer but then when it goes to the "communicating with your printer" window, the green line gets three quarters along and then it just stays at that.  Printer is connected via usb.

  The other info I have for you, is my computer crashed a week ago (has been hacked) and therefore had to have everything (including windows) re-installed (done by a professional not me :-)  Etc. print driver has been reinstalled at the time (from online), but has not worked since.

  I would be very grateful for any help that you can provide as I use the printer for my home business.

  Hi @HelenMay,

  Thank you for visiting the Forums from the HP Support! I understand since your WIndows 8.1 computer crashed, you are able to print to your HP Envy 4504 nolonger. You have the software and drivers resettled but when you attempt to print it is unable to communicate with the printer.

  I would like you to follow the steps below:

  1. perform a clean boot: How to perform a boot in Windows

  2. now, go ahead and use the System File Checker: use the tool File Checker system to repair missing or corrupted system files

  3 uninstall/reinstall:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Envy 4504 to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software 4504 envy has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and start to download and install your Windows HP Printer Driver and software for a USB cable connection

  * DO NOT CONNECT USB UNTIL THE SOFTWARE INVITES YOU TO *.

  Here is the link for the software and drivers:

  HP ENVY 4500 e-all-in-One Printer series full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• HP ENVY 4504: Micron WILL NOT GO BY PRINTER KODAK PREMIUM PHOTO PAPER 280 x240GM

  My HP ENVY 4504 printer will not feed Kodak premium photo paper 240 gms through

  Hello

  First if you please the way you load photo first papers. Have you tried HP papers with the same thickness? Please check your loading process using the following Manual:

  http://h10032.www1.HP.com/CTG/manual/c03784120.PDF

  Kind regards.

• HP Envy 4504: Envy 4504 photo prints too red with print quality = better

  Hello

  I hope someone can help.

  On my HP Envy 4504 photos are printed OK print normal quality, but when the print quality is set to best photos are printed to the red. In addition, with DPI Maximum printing photos are much too red.

  This takes place two times printed on paper Normal and on Photo paper

  With the GIMP, I tried to make an example of how a photoprint looks like.

  I made the example by changing the color Balance: Red cyan - about + 40:

  (my GIMP is Dutch...)

  

  Here is the result:

  LEFT: Photo printed in normal quality; Photo on the RIGHT printed in better quality:

  

  I have already completely remove the software HP Envy and did a clean reinstall. No change.

  I have print-head - cleaning cycles (2 times); color of HP-testprint strips looks very good: all are strong in alignment is correct

  Unfortunately: No picture change in best quality still too red.

  The ink levels are okay.

  Any suggestions what is wrong and what can solve this problem?

  Thank you for your support

  Kees-Jan Timmer

  Hi @Kees-Jan,.

  Welcome to the HP Forums!

  I noticed that your HP Envy 4504 prints photo is too red with print quality = best on Windows 10 operating system. I'm happy to help you!

  Where a setting is disabled, with GIMP, have you tried to print photo quality with other programs? If so, what happened?

  You use genuine HP cartridges or refills?

  None of your ink cartridges are low or empty?

  In the meantime, please make sure that all the steps in this guide, fixing poor print quality are executed. And let me know what happens!

  Thanks for posting and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP DESKJET 2515: Unable to COPY/SCANNING

  Hello Sir,

  This HP printer Deskjet2515 is 2 years old and I don't face any problem until 2 days ago.  Since yesterday, we are not able to copy any document directly from the printer. When I try to scan a document through PC, we don't scan.  Before yesterday, everything was to find work.

  I used HP printer and scan the doctor, but he is not moving not far from device driver.

  There is no pronlem in the printing of the documents. What I noticed while this copy/scanning, the scan header moves from one end to the other end and not return until I have the printer is off and turned back on. Also during the header scan, NO illunimate of light, but when he reached at the other end, a dull white light lunimate.

  PL. help me to find the problem.

  Hello

  Please click the link below to get help from your region number.

  Language-country selector.

  Hope that helps!

• 6700 all-in-one - can't copy, scan or fax

  I have a HP OfficeJet 6700.    We work well until last week... He wil feel but it wil not copy, scan or fax.   The error message is "Unable to scan, copy or fax."     I remember seeing that an update was received on the printer some time before that.    I tried to restore factory settings, turn power switch, etc.   Through the tool of diagnosis without results.    Help!

  For those who have this problem.   Finally, I called customer service HP, being willing to pay just what he needed to fix this.    You would not believe this resolution!   I do not think that HP called a bug, but I'd sure like to.    This is because the printer is plugged into a surge protector.   HP KNOWS that it is a problem... but it is posted all over these blogs?  NOOOOOOO!    So I plugged the printer directly on the wall, did a hard reset by pulling on the power cord to the back of the printer, replugged the power and it worked.   What I call a bug because there is nothing wrong with my surge protector... it is something in the printer.    Told me that I can now reconnect on if overvoltage limiter I want and it'll work.   BUT... that, if/when it happens again, the solution is to plug directly into the wall again and again a reset.    Anyway, everyone to knowabout wanted this issue with printers and the surge protectors.

• HP Officejet 6600: Fax/copy/scanning does not work

  I'm unable to use my fax/copy/scan on the printer functions.  The printer works well when printing from the computer.  I've done all the troubleshooting... Disconnect, restart it (printer and computer), etc.  All the reports that I ran to the 'troubleshooting' return with all PASSES.  But when I re - try these functions, the printer display "starting fax" or "Start scan" and "start copy."  I've been here for the last 10 minutes trying to get a copy, and the screen is still showing "start copy".  And while they are 'begins', I am unable to 'x', so I put off the printer.  The printer is 2 years old and we bought the extended warranty expired 2 months ago thanks for any help you can provide.

  Hello

  I will be happy to help you with that, may I know if you have tried uninstalling the driver of your PC printer and re - install the latest driver?

  1. Uninstall the printer driver HP Officejet 6600 of Control Panel
  2. Reinstall the printer driver for HP Officejet 6600.  Here is the link to download the latest print driver: http://www.support.hp.com/us-en/drivers/selfservice/HP-Officejet-6600-e-All-in-One-Printer-series---H7/4322968/model/4323587

  'Although I am an employee of HP, I speak for me and not on behalf of HP' 'say 'Thank you' by clicking on the star of congratulations in the post helped you. -Please indicate the position that solved your problem as "acceptable Solution".