HP envy 4520: cannot print without directly using wireless

Similar Questions

• Want to 5640 e - Allinone: HP Envy 5640 cannot print without problem indicated

  My hp wireless want 5640 e - Allinone scanner/printer all of a sudden couldn't print more with no error showing.

  This printer has been used very frequently and it used to work well.  However, I kinda stopped using it for about 2 weeks, and today when I tried to print, whenever I sent a document to print, the printer status showed 'Impression' and suggested that the documents have been printed successfully; However, the printer was actually nothing.

  I tried to uninstall/reinstall the hp printer driver for several times, used hp print and scan doctor showing all the controls without error, turned off the firewall, checked the wireless connection for my laptop and the printer and even used a USB to connect my laptop and printer, but still failed to get a response from the printer.  Fortunately, he was able to print an internal test page by printing HP and scan doctor, but not a test page.  In all these processes, the State of the printer was still showing indicating "Ready" for printing without error.

  On the other hand, my printer have been able to print several documents sent from computer laptop of my roommate via connection Wi - Fi, and my laptop would have also ordered my roommate, a Canon one printer, to print via wifi.

  This situation has botherd me all night and I'm actually much more dependent on the printer now that the school year has started.   I really hope that someone can solve my problem and I would appreciate his helpfulness.  Urgent need of your help!

  Thanks in advance,

  Willow

  Hey Willow.

  I see that you are having a problem wireless printing using your printer HP Envy 5640.

  If your roommate can print using your printer wireless, then I think that there is nothing wrong with his connection.

  To restore the State of your printer, you can try to do a Hard Reset. Simply unplug the power cable from the wall outlet, then to the back of the printer. Wait at least one minute, then plug it on both ends. Normally the printer will power on automatically. If this is not the case, simply press the power button.

  Blue wireless light should remain solid, once the printer is powered completely.

  On your PC, go to run by pressing Windows + R keys on your keyboard.

  Type services.msc and Services window should appear.

  Restart the services listed below by right-clicking on them and selecting restart. If it has not started yer, select start.

  1. print spooler

  2 IP Helper

  3. web client

  4. network access protection agent

  Try to print all your documents and see if it will work.

  Hope this will help.

  Nice day!

• ENVY 4524: Cannot print 4524 WANT using MAC CAPITAN

  I recently bought a new HP ENVY 4524 and can't print. I followed all the instructions that I can find, and when I try to send a document to print it just isn't. It will say "printing" and "finished printing" but nothing happened!  I upgraded my OS to El Capitan, set up on my wifi and checked there is a good connection and turned off the firewall, I can print from my I pad.  I would be grateful for any advice solve it please.
  Thank you

  Hello

  Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  This is often useful if you have trouble establishing a connection.

  

• HP Envy 4500: Cannot print the error message

  I just replaced the black cartridge of the moment on my 4500 and the printer will not print. I get the error message is - cannot print. Visit www.hpinstantink. Com for info. I did that but it's impossible to find useful info! Help, please!

  Hi @clairerobinson6.

  Welcome to the Forums of HP's Support. I understand that your printer does not print and directs you to instant ink site. I would like to help.

  The printer is in the instant the ink program. He receives this error for two reasons. The printer has not been able to connect to the servers of HP ink level controls or the number of pages in a long time, or there is a bill pending. Normally when you sign in to your instant account of ink there is an opinion on the matter. If you do not see a notification, try to reach out to the instant the ink Department.

  You can send them a tweet directly from your instant ink account, or use this link to find the appropriate phone number.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• HP envy 4500: hp envy 4500 cannot print after upgrading Windows 10

  Does not work with windows 10. When the updated drivers will be available?

  I have downloaded and run EN4500_198.exe. Add a new printer via direct wireless.  I received the message that my printer has been installed. When I try to access the printer through the network, the printer is not found. When I do for the devices and printers, I see my printer with the following message: HPF734F1 (HP ENVY 4500 series) driver is not available.

  I can scan to my computer, just not printing. I'm lost.

  OK just figuredb out. had to remove the old printer definition Bundeskunsthalle windows 8.1. Once I did that, win dows 10 find the printer on the network and use it correctly.

  Thanks for all the help.

• HP 4520 Envy: Envy 4520 only printing in black and white

  Whenever I try to print a PDF online or a document of microsoft word or powerpoint ect., it prints in black and white. I did a test of color of the printer and align the cartridges and everything went well. The properties are not set to print in grayscale. I have no idea how to solve this problem.

  Hello @BlueOlive, greetings!

  Thank you for joining the HP support forums, I would like to help

  I understand that your printer prints in black and white only, even if you can make a color copy.

  According to me, the question is in the print settings itself. Please follow the steps and check mentioned below:

  • Go to control panel - devices and printers - give Envy 4520 right-click and select Printing Preferences.
  • In the pop-up window, click on the 'Advanced' button - check for printing in grayscale option. Make sure it is turned off.
  • Also once you try to print a document please go to properties of the printer to make sure it is not set in the option "print in grayscale".

  If the steps above has not resolved the problem, it could be a problem with the printer drivers. In this case, we might need to uninstall the drivers and re - install the same. You can visit http://hp.care/2bYZled to download the drivers.

  Let me know how it goes!

  See you soon

• HP ENVY 4520: SETUP PRINTER ERROR?

  I got this error message when you try to download the drivers to install this printer HP Envy 4520:

  Call to DriverPackageInstall returned error 5 for package "C: / Prgram files/HP/HP ENVY 4520 Series/Driverstore/NGScanDriver/HPNIA_EN4520.INF."  A caller of DriverPackageInstall must be a member of the Administrators group to install a driver package.

  What the hell it means, and how should I do to fix this?  All ideas are welcome.

  Thank you

  Deb7325

  Hey @Deb7325, welcome to the Forums of HP!

  I would be happy to help you install your craving 4520. If I understand your description that you see "Call to DriverPackageInstall returned error 5 for package" C: / Prgram files/HP/HP ENVY Series/Driverstore/NGScanDriver/HPNIA_EN4520.INF 4520.  A caller of DriverPackageInstall must be a member of the Administrators group to install a driver package. "When you try to install the software.

  You are the administrator on this PC, or you logged in to the Admin account? If this isn't the case, please ensure that you install on the Admin account.

  If you try to install on the Admin account, please perform a clean boot and try to install again. If you need help by performing a clean boot, click the following link: How to perform a boot in Windows.

  If you are still not able to install the software, let me know and I will do everything I can to help. If this resolves the issue, please be sure to mark your post as solved by clicking on the accept button Solution below. Thank you.

• Cannot print without wire - HP photosmart premium

  I've had my printer for at least a few years, with limited use. I have no problem to print wireless until a couple of days (I have a router with wireless Netgear 52).

  I get an error message indicating that the printer is offline.  When I uncheck "use printer Offin" in the printer properties (I use Wondows 7), I get an error message stating that the "cannot print document."  Sometimes I don't get the message offline printer, it just says: "print document faled.

  When I run the diagnostic it says that the wireless radio is on.  In addition, the blue light for the wireless on the control panel is on.  My wireless works fine and all computers and wifi devices are connected.

  What should I do?

  Hi adisank,

  Sorry my suggestion did not work for you, but I have another!

  I recommend you try to convert a USB connection to a wireless connection. Convert from a connected USB wireless printer.

  Also if you print a Network Setup page, nothing missing the test?

  Hope it works and have a nice day!

• Cannot print Web pages using network printer.

  I have a dell computer in 2012 and I am connected to a network printer. I am able to print from Word, Excel, pdf documents, but I am not able to print something directly from the web. Y at - there someone who can help and give ideas as to what is causing my printer to print from a limeted source.

  OT: Network printer

  Thank you

  Hello

  1. What is the brand and model of the printer?
  2. What is the accurate and complete error message you get?
  3. don't you make changes to the computer before the show?
  4. what web browser are you using to print Web pages?

  If you use Internet Explorer to print from the Web site, I suggest you try the steps from the following link:

  I can't print or preview before printing a Web page in Internet Explorer
  http://support.Microsoft.com/kb/973479

• Cannot print the content using Epson Stylus CX4700

  Can anyone tell how to get my printer Epson Stylus CX4700 to print?

  I can scan from the printer to the computer, but it will not print scanner or computer.

  Original title: Epson Stylus CX4700

  Hi Thomson,

  Welcome and thanks for posting in the Microsoft Community.

  From the description, I understand that you are unable to print the content using a printer.

  This issue would have occurred due to some hardware problems (printer).

  Please provide us with additional information to help you best:

  1. You did changes to the computer before the show?
  2. Have you received an error message / error code when you try to print the content?

  I suggest you to perform few of the steps mentioned in the article below and check out them if you are able to print the content in case of problems.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab3&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Lightroom 2 - cannot print without margins, even if the printer can

  Hello

  I can not print prints A4 borderless, although there is the option in the printer driver and the software itself to enable this feature (which I activated and he even mentions printing without margins in printing from Lightroom). I can print perfect as a4 borderless prints from iPhoto on Mac and my printers have the software itself (HP Photosmart Studio) my printer is a HP Photosmart D7260.

  Any idea?

  In the lightroom print section, there are always 2 thin white bars on each side of printing to indicate that printing will not be without borders, whether a print portrait or landscape, it is the same when printing... 2 ugly thin white bars. I've attached a screenshot of what I see my end.

  Mike.

  Unfortunately you do not have the visible right panel, or I might know this: you have zoom to fill on?

  What it looks like to me, is that the culture of the image is different from the culture of paper, so you see the white bars. By clicking on Zoom to fill should solve the problem.

• HP Envy 4500-cannot print in COLOR and do not give me an option. ONLY black and white shows option

  My test page for the HP Envy 4500 comes out beautifully with vibrant colors and without streaks.

  I can also print other devices with color.

  Not connected directly to my computer, I have no options to print in color.  Photos, web pages, PDF files all print in B & W.

  The other forum posts which give instructions to get out the cartridges do not solve the problem.

  I am printing from an OSX and I have genuine HP cartridges.

  If I unplug the USB printer and try to print wireless, it still doesn't print in color well can we of our two phones (ios and android).

  Help, please.

  I uninstalled everything and him reinstalled the HP Envy 4500 driver out of the site.  Now, it will be printed in color of all programs.

  Hope this helps someone

• ENVY 5640: HP ENVY 5640 - cannot print more

  Hello

  I have a HP ENVY 5640 I had setup was working fine before.
  I have not used the printer for a few weeks, but there is no problem with the ink cartridges.
  The part Scanner works fine.

  I can't print anything more and I do not understand why.
  PowerPoint, gives me the following error: "we have found a problem with your installation of the printer and could not print.
  I tried the printer with word and acrobat reader and nothing going on (not even an error message)
  I ran all the tests in diagnosis using HP doctor, I tried to receonfigure the network settings, I tried to uninstall

  Reinstall the printer as a USB and a wireless printer, I even tried to disable the firewall and nothing seems to

  make it work.
  With the doctor of HP, the test page prints fine, but otherwise nothing printed.

  I am really confused and a little frustrated because I really need to print some papers tonight.
  I just spent 2 hours trying to fix it without any luck :-(

  Could you please help me?

  Thanks in advance.

  Hi @RS25,

  Thanks for getting back to me.

  I thought it had something to do with the corruption on your computer. I'm glad that you were able to determine the cause with my suggestions.

  I would like to use this guide:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply to this message with the results.

• cannot print without a box ' save print out put as "coming, what is new since the last update of firefox

  Since the last update of firefox, which has been really helpful for blocking popup, I can't print anything for example an email or bank account information without a box entitled 'save the output as' with lines of file information usual name and location. I don't want to do and have never had to do before, also when I close the box a "Printing error" box appears and I can't print.

  The setting you make must persist until you change it again. The "default" is the last used printer.

• H P want 7640 printer: HP Envy 7640 cannot print borderless

  I can not print prints of borless.

  There is no place without borders to check in the settings.

  On my pictures, all I want is without borders.

  I uninstalled the printer and reinstalled. Has nothing. I've updated the driver. Has nothing.

  I must be missing something somewhere.

  I would appreciate your help. Thank you

  Hello

  What software are you using to print? Thank you to use the software that comes with the printer (on the CD) or you can download it from the following link and install it on your computer:

  http://www.HP.com/global/au/en/consumer/digital_photography/free/software/photo-creations.html

  Kind regards.