HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

Similar Questions

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• HP ENVY 4500: Error: the printer could not print

  After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

  An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

  Any ideas?

  Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

  SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

  Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

• HP ENVY 7640: Control Panel printer is not responding.

  control panel touch printer does not respond. The power button is sensitive and the button of the nfc. Need help please

  

  Hey @mrjunior,

  Welcome to the Forum from HP Support.

  I see that the front panel of your printer does not work e-all-in-one HP ENVY 7640.  I want to help you with this.

  Have you tried a hard reset?

  1 make sure that your printer is on.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer (if it does not start automatically).

  It has more advanced reset steps available, but they are not good for you if the printer will not allow for you to navigate the touchscreen menus.  If this basic trick restores façade features let me know and I will private message you the semi full reset steps.  Otherwise, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Once you complete the form online to build your business, you can choose among different ways to contact direct.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP Envy 7640: Wizard of the printer does not - HP Envy 7640 UDCString_UDCName error

  I am able to print, scan, copy and fax on my HP Envy 7640 printer very well.  However, when I click the icon HP Envy 7640 for the Printer Wizard just to check my ink level, for example, I get a script error.

  An error has occurred in the script on this page

  Online: 42

  Tank: 17

  Error: Unable to get the "UDCString_UDCName" reference to undefined property or null

  Code: 0

  URL: file:///C:/Program%20Files/hp/HP%20ENVY%207640%20series/Bin/HPSPProgress.hta

  Do you want to continue running scripts on this page?  YES NO

  Before I can even click on YES or NO, the screen changes to show the following. There is a yellow triangle with an exclamation mark next to this error:

  HP Printer Wizard

  Series\Bin\UDC_files/UDC_Main.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/tasks.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/URL.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/localize_1033.JSON HP HP ENVY 7640 C:\Program

  When I click OK, I get:

  HP Printer Wizard

  Stop running this script?

  A script on this page slows down your web browser to run slowly. If it continues to run, your computer may become unresponsive.

  I connect to Internet through LAN.  My printer is connected to my pc through USB.  I do not use of wireless.

  I did not any changes to software or driver.

  I read through many solutions in this forum and tried several.  I disabled my firewall and antivirus first.  None of them have worked. I tried the SCLiteFix_299026.exe, the missing persons files difficult.  Did not work.  When I try to uninstall the printer and reinstall, I can't do that either.  I get error 2503 and 2502.

  I want to just my printer wizard to work and have been unable to find a solution.

  Maybe not all of these steps were necessary, but here's what I did and it worked! :

  (1) open HP Support Assistant icon on desktop.  It is a white question mark in a blue circle.

  (2) HP Support Assistant should show all HP devices.  Find your printer and click on UPDATES.  (Mine had no updates pending, but I clicked on UPDATE anyway)

  3) click on Diagnostics and tools

  4) click on HP print and Scan doctor.  Select your printer and click NEXT

  (5) you will get DIFFICULTY PRINTING and SCANNING of DIFFICULTY.  I chose the DIFFICULTY of ANALYSIS

  (6) when he finished, a screen opens and says "If you still have problems with your product, here are a few options for additional support.   Physically, I removed the printer cable to the USB port and choose "UNINSTALL AND REINSTALL with the latest version of the software".  I wasn't expecting to work, but he did.

  (7) I rebooted.  When my pc came, I began to other programs or applications.  I have disabled the firewall software and anti-virus temporarily.

  (8) I have re-inserted cable printer to a USB port

  (9) I open the HP Envy 7640 installation disc and click with the right button on the file: E7640x64.msi.  I clicked on install

  (10) software installed without error.  I then went to my office, clicks on the icon HP ENVY 7640 series... and VOILA!  My Printer Wizard now works!

  (11) I turned on my firewall and anti-virus back and I'm IN business

  Hope these instructions can help someone else.

• HP Envy 5660: KP want 5660 will not print envelopes

  I just started to try orint envelopes, but my printer HP Envy 5660 of four months will not be printed #10 or other envelopes.   Machine prints letter size and scans OK but no joy with envelopes.  The value wraps #10 and the loaded paper envelopes.  printer starts to take the envelope then freezes with a "thud" sound and displays the following error message:

  Paper size difference «»

  Detected by the printer paper size does not match the selected paper size. »

  I re-downloaded and installed the latest version of the HP 5660 software, still no joy, as above.

  Very frustrating!   Should I have a defective printer?

  I thought about it!  HP will be happy to lnow that the problem was not with the printer HP 5660.  It is with my need to learn how to configure Word 2003 to print envelopes with this printer.  After several visits to help offline in Word 2003 is included on my machine, I have found how non-intuitive to envelopes that run with the 5660.  It evolves your envelope and the graphics setting in tools/Word/letters and direct mail/envelopes and labels/add to the document and then saving them as a Word (.doc) document.  Then, to get the envelope to print, load the envelopes into the printer, then press file/print and then (totally intuitive) configured to print the "current page" or page # 0.  For successive envelopes, you edit the address if necessary in the Word document and then file / print... again.   It seems to work like a charm!

• HP Envy WIFI printer will not install

  HP ENVY WIFI printer will be installed on my laptop... tells me it cannot install a driver for it?

  Hello

  You put a serial number of the printer here, not a model number of the printer

  Access the site of HP drivers at this link > put in the full printer model number > select your operating system > find the right drivers > download and install following the instructions from HP that you may find.

  http://WWW8.HP.com/us/en/support-drivers.html

  See you soon.

• Want 5530 printer will not align properly

  Hello

  I had to change my black cartridge in my printer HP Envy 5530.  Alignment printed document, I noticed that the color cartridge should also be replaced if I interrupted the process (this may have been a bad idea) and installed a new color cartridge.  When the process is restarted, correct alignment of printed document, but when I put it on the glass in order to complete the process, alignment failed.  It appeared that the document could not be read, and I received a message about the configuration of the cartridges to 'default' all that meant.

  Then I went to copy a document (in black) and, to my surprise, it came out white.  It seemed that the alignment document could not be read.  I thought that the scanner have been damaged, but I was able to scan documents.  I was able to print, but the quality was poor.

  I tried the following without result:

  1 removed the cartridges and Redid the alignment process.

  2 unplug the printer and Redid the alignment process.

  3. reinstall the printer.

  4 Ran own process of heads and repeat the alignment.

  5 etc.

  I discover that the system copy so I used the color option.

  I'd appreciate the help.

  Thank you.

  Badger66

  Hello Badger66,

  Welcome to the HP Forums!

  I understand that your craving for 5530 will not align correctly. I will do my best to help you! I want to thank you for providing such a detailed post. Please make sure that the printer is connected to a live wall, not a surge protector. Then, please follow these steps in order:

  Remove all printer ink cartridges, and then close the door
  Remove the power cord from the printer (do not press the power button)
  Wait for 60 seconds or more, then reconnect the power cord to the
  Wait for the printer to turn completely, and then install ink cartridges
  Try printing another alignment

  Please let me know if this page has been accepted or not. I will seek forward to hearing from you.

  Have a good night!

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• My screen saver is set on various photos & first, they light up but they will not stay running

  Original title: screen saver

  My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

  Hi mel merrill,.

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do the computer in sleep mode?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2

  If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP F2210 printer will not be closed, and all the lights are on. Tried unplugging don't, no results.

  My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.

  I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01430567

  Let me know if it helps.

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• HP ENVY 4500 SERIES: my printer does not print words

  each document I try to print from my laptop missing every word so that it is a blank status report also every word Miss page.the and other printable pages of the printer itself.

  Hey @azs1500,

  Welcome to the Forum from HP Support.

  I understand you have a print quality problem when you use your HP ENVY 4500 e-all-in-one printer.  I want to help you with this.

  In addition to the obvious problem, the printer is able to print other types of documents, such as pictures?  Alternatively, are you able to make the copy of the façade?  What operating system work?

  I found a HP article which may help you to improve your print quality.  Click here and work your way through the recommended solutions.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!