HP Envy 5530: HP Envy 5530 truncates (chops) image of Snip and Snipping Tool Windows 10, Word 2007

Similar Questions

• e: 5530, 5530 e urge will be this fax device under windows 7

  This printer is able to fax on windows 7?

  Hello

  The HP Envy 5530 is a printer, a scanner and copier, is not a fax machine and so the answer is no.

  You can find the printer specs below:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/HP-envy-5530-e-all-in-one-printer?JumpID=oc_r1002_usen_c-001_r0001#! & TabName = specifications

  Kind regards

  Shlomi

• HP Envy 700xt (700-215xt): want to 700xt and Windows 10

  I have a HP Envy 700xt (700-215xt) that I bought in 2014, running Windows 7 Home Preumium, SP1 with updates. I am considering upgrading to Windows 10 before the expiration of the free update. Someone has done successfully with this HP machine? What are the positives and drawbacks? Thank you.

  Greetings,

  Your system wil run probably win 10.

  There is no way to verify what is happening until you upgrade to Win 10.

  I do the upgrade on another HDD or SSD that will preserve your current installation of factory. You'll clone the existing installation or install the original image on the new SSD or HARD disk.

  Do the upgrade on the clone or a new factory HP installation. If the upgrade fails you will always be an image bootable on the original HDD or SSD.

  Back up your data and create a system image using the Microsoft image backup options or use a third party software to create an image.

  That's what I would do to avoid having to reinstall the original image, if the upgrade to win 10 fails.

  See you soon!

• HP ENVY 700-000z Desktop PC with 8 and the need to know if I can install Windows 7

  Just bought HP ENVY 700-000z Desktop PC equipped with 8 and need to know if I can install Windows 7 on this computer without problem.  My work does not allow the use of Windows 8.  If I can install Windows 7, what version of operating system do I need to buy to do a clean install.

  If I understand correctly, I could order the Windows 8 Pro, who has right to demotion and then install Windows

  7 pro, I have then I should be able to get the drivers, I need HP is correct.

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You should ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;

  

  or

  

  In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.

  Most of the Windows 7 drivers from the drivers of HP Pavilion p7-1299 c desktop PC page should work on your desktop HP ENVY 700 - 000z CTO. Both models use a variant of the motherboard HP Jasmine. If you have missing or unknown devices after installing the drivers, please post the "Hardware ID" Device Manager for devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• After that change my printer cartridge 5530 1 want wants to realign and analyze whenever it is turned on

  After that change my printer cartridge 5530 1 want wants to realign and analyze whenever it is turned on.  When I do that, it says "Scan not detcted.»  After a 2nd scan, it attaches to the default settings.  Then I can use the printer.  Is there a way to disable alignment?

  You can try to reset the printer.  He could clearly your question.

  Measures

  1. Press the power button () to activate the product.

• HP ENVY 15 t-j100 Quad Edition: drivers and software for simplepass with finger print reader.

  I have a HP ENVY 15 t-j100 Quad Edition laptop and I need simplepass software and drivers for the fingerprint reader.  I win 10 and simpelpass software has been deleted by mistake.  I can't find where and how download from the hp web site.

  @shadow_42

  Welcome to the Community Forum of HP.

  There are a small number of Windows 10 HP drivers:

  HP ENVY TouchSmart 15 t-j100 Quad Edition CTO Notebook PC

  Please check - in particular, you may want to ensure that you have installed the Chipset driver.

  ===================================================================

  Windows 8.1 driver revealed this Eagle Driver validity for your fingerprinting device:

  sp63418.exe

  Series 8 HP SimplePass program has just been updated for Windows 10:

  sp71729 HP SimplePass V8.01.46has 32/64 bit W7 - W10

  • Install the driver first, restart the computer and log in
  • Install the program HP SimplePass second, restart the calculation and sign

  Help, Information and general advice:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Section:

  Procedure - updated / (install HP SimplePass Re)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP ProBook s 4430: hp envy 5530 e - all - in - one printer prints not after windows 10

  I got Win 10 installed for a few months and have just tried to print with my HP Envy 5530 e printer. I tried a doc in Word and he showed that he was priinting, but he vanished from the queue after about 15 seconds.

  -C' is my default printer and displays "series HP Envy 5530 (network).

  -my wifi is connected

  -J' tried to unplug machine and wall & turn off wifi

  -J' tried troubleshooting, but he could not identify a problem

  -J' tried to update.

  -J' uninstalled and reinstalled with disc and I have uninstalled and reinstalled online

  -Print and scan doctor = all OK

  -Test print = print and submitted, but disappears after seconds too

  -internal print has no print

  -disabled firewall only = no print.

  What Miss me? I've never had a problem with Win 7.

  Hi rb101,

  Your suggestion to contact our assistance worked!  I had a conversation with someone, and they changed my driver to a generic driver and that's...

  Thanks a lot for all your help

• HP Envy 5530 question about Online versus WiFi and access by HP for ink monitoring program

  Hello

  I am new here and also back to the program monthly fresh HPs for the programme of replacement of ink as well, I tried to find the answer to my question but could not.  Then...

  My question is, as I don't have a WiFi router (used for tv, netflix etc. at all hours of the day) to use my new HP printer Envy 5530, and given that I am enrolled in the program of ink, this means that my computer itself must stay online 24/7? Or just have my WiFi on 24/7 gives the printer access, it must be monitored by HP for its ink for the monthly subscription levels to be enrolled in the program of HP ink?

  Thank you

  PhyAnnie

  Hello

  No need to be on 24/7. Whenever you turn on the printer, it will connect to HP Server you set up normally (you can print, scan, and send it to print).

  Kind regards.

• HP envy 5530: printer Cup emails in width and loses 1/3 of the words on the right side

  When printing emails, 1/3 of the words from the inside of the right margin are cut and do not print.

  animal-lovers

  Welcome to the Community Forum of HP.

  Emails are tricky - and not all email clients are the same, neither are the browsers where you can print the email.  Almost anything could break the margins on the right side.

  Please take a look at the following and see if anything here helps - and you can also try opening your emails using another browser, too.  Yes, I know - eew.  But it might help to see what is happening.  In addition, it could give you an idea, if the problem is universal, i.e. emails look bad / feel bad no matter what you use.

  You might be able to use 'Fit to page' in print preview mode, or you might be able to control the margins by adjusting the actual "margins" - also in mode print preview.

  If all else fails, you may view the email and take a 'Snip' from the email, save it and then print the image you saved.  Ick.  But it could be something that you could use as a last resort.

  Manage the print with preview output before printing

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Envy Phoenix h9-1330: No. IDT pilot = no sound in Windows 10

  Hello

  Currently I am fuming with frustration because last night I noticed my Audio Beats Panel was missing and when I searched for it in the menu start he says that the shortcut has been lost. I searched these forums very and advice provided to completely uninstall the IDT Audio driver, reboot and let Windows Update to reinstall the driver. However, when I came back to my computer tonight, Windows Update does not update and I have no sound driver, therefore, no noise. Since I was on Windows 10, HP chose not to create a driver on their Web site for my specific computer beyond Windows 8.1. Could someone help me please, I already made the decision that I would never buy a computer ever pre-engineered, much less a HP, but to make this last a bit more someone can you please tell me how I can get my IDT Audio Driver back as well as the Beats Audio Control Panel on Windows 10 64 Bit for the HP Envy Phoenix h9-1330.

  Thank you.

  sp71717 is an audio driver IDT W10.

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71717.html

  sp71918 is only for notebook PC with the IDT.

  If you do a search in the forum Office IDT Windows 10, you'll see a lot of messages from members with similar PC ' where sp71717 works.

  Here's one for example yesterday.  There is no audio driver IDT W10 for referenced either model.

  http://h30434.www3.HP.com/T5/desktop-audio/beats-audio-missing-after-Windows-10-update/m-p/5795402#M55499

  Probably the registry is damaged, as you have tried so many drivers.

  The only suggestion I can offer at this point is to right click on uninstall to select a problem IDT HD audio device, check the driver uninstall, restart the PC and try again sp71717.

  If that works, for now you can have his base by performing the following steps...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• HP ENVY 15-w100na x 360: upgrading RAM and M.2 SSD

  Hello

  I can't find a piece of data (spec) of my (HP ENVY 15-w100na x 360) product and wanted to find the number of RAM slots or if I can update my ram and also is there a M.2 SSD slot avaiable?

  thanx

  @AhmedAmmar

  Your maintenance and Service Guide here.

  http://support.HP.com/us-en/product/HP-envy-x360-convertible-PC-series/8499294/model/8903683/manuals

  Look at page 1.

  REO

• HP ENVY 5660: Connected printer & print desktop PC and tablet. Print & Scan doctor says he is not and cannot be.

  A couple of weeks ago, we changed Internet providers & I plugged our devices (desktop, tablets, phones & printer) in the new system.  We now have AT & T U-verse with a cable of optical fiber to a hub not far from our House & a circuit dedicated copper from there to the router/gateway. They claim that we have a regular service of Mgbps 18.

  Everything seems to work very well. We had anything drop and do not cause any problems. However, our range of printers HP says that it is connected to the Internet. It provides all the correct information and it works very well in our devices. But the Asus desktop computer insisted that the printer is offline, even if I print documents from him. Today, Windows did an update and when I checked the update report that he said he could not update the printer because it is in offline mode and it will not be printed. Then I printed something again.

  This update failure is my real problem. When I checked in the settings in Windows 10 on the desktop, it also insisted that the printer is offline. So I clicked on the icon of the application for the Print & Scan doctor. He also insisted the printer is not connected and that it is unable to connect from the Internet. Yet once again, the printer prints despite this reported disconnection.

  I don't know if the printer is actually updated even if update report says that it is not. I have had no problem since the printer from the reconnect the devices and printer or the update today. After I've done 4 or 5 tries to install the software with printing & Scan app, I checked in the settings of Windows 10 and again, he has insisted that the printer is offline.

  However, earlier, I checked in the settings, printers and scanners again in 10 Windows on the computer from Asus desktop & for the first time it reports "Series of 5660 HP ENVY (network)" & "Serial number (5660 HP ENVY series)" as the customs declaration.  The first says that it cannot print when I tried a test page; but, the other printed a test page. Is the first representative of the scanner and it cannot print because no document has been selected?

  When I created this Asus desktop / printer in February when I bought them, I did it using WIFI only, using no USB connection, to do and the printer has always worked our devices just as it continues to do so.

  Again, my real problem is declared failure to Windows 10 update.

  Thank you for taking the time to browse this message and I thank you for your help.

  Hello
  
  Thank you for using the HP Forums.

  Can you try using a TCP/IP port?
  
  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.
  
  This video resource will show you how do:
  
  Create & use TCP IP port
  
  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
  
  Let us know if it works

• HP Envy: Envy of HP 4520 all-in-one and Windows 10

  Hi team!

  We purchased through amazon.de 4520 Envy HP all-in-one. Just tried to install and connect wirelessly to my HP Pavilion G6. Our laptop was free update Windows 10 about 6 months, he has also kindly invited by HP.

  The installation of the HP Envy disc says it works with Windows 10. But the message from the HP site, says - it has not been tested with Windows 10 and they will not be drivers for Windows 10!

  Please, help me and advise me - what I have to do, how to connect the two devices, the laptop can't find the all-in-one device? The test reports of test results wireless network went ok, no problems found. However, the printer is not finding by the laptop.

  Alternatively, can I go back to my old version of Windows? How?

  If I can't do anything, I would have to return the unit...

  Kind regards

  mirakirova

  Hello
  
  Thank you for using the HP Forums.
  
  Please uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4520-all-in-one-printer-series/5447920/model/5447921#Z7_3054ICK0K8UDA0AQC11TA930C7
  
  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps!

• ENVY 14 Sleekbook - 14-k074ca: cannot find wireless networks after Windows update 10

  Hello

  I have problems connecting to networks wireless on my HP ENVY 14 Sleekbook (14K074ca) TS. Networks are available, as I am able to connect via my phone and other PCs.

  I tried the network troubleshooting and it failed. I've updated the network wifi drivers. I turned the button wireless on and outside. Nothing works.

  I noticed this change after a recent update of windows 10.

  Can anyone provide any help?

  Thank you.

  Hi@philipmanzano,

  Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how to publish and more

  I understand that after a update Windows recent 10, you are having trouble connecting to wireless networks. Please read this post from @Great-Christine-Tree Commons fixes for wireless connectivity problems. Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.