HP Envy 5540: Photo paper will not be printed

Just got this HP Envy 5540, and when I try to print a photo of 6 x 4 from the drawer special 6 x 4 photo, it shows just a printing 6 x 4 on the main under tray A4 size paper.

What is the point of this special photo print bed if she does not?

I tried to change the default paper size in the "set preferences" section in the HP Envy 5540 software but it makes no difference, it still shows from the main A4 size paper tray.

Hello!
Welcome to the HP community @pboo,

I noticed your post about the problem you are having with photo printing 4 x 6 inch photo paper, to your craving 5540, and I wanted to stop sharing my own suggestions.

1. run the print and scan the doctor for Windows in order to solve printer problems

2. Uninstall and reinstall the printer if the first stage did not help. Run it set printer to install the Printer Wizard.

3. try to print from different programs.

Also here is a guide to help the printing: Printing Photos

If you have trouble, let me know and I'll do my best to help.

Click on the thumb to below testify my help!
Click on the "accept as Solution" if I'm you guide to a solution!

Best wishes

Tags: HP Printers

Similar Questions

  • Designjet Z3200 Photo: Designjet Z3200 Photo - paper will not load

    I got this plotter for less than a year (although it was purchased through a school and languished in receiving for a while before I was in fact, the guarantee is therefore).

    Today when I tried to load photo paper in it he refused to recognize that I inserted the end of a roll in the plotter. I went through the procedure of typical paper loading, but it seems that the sensor that records the fact that the document has been inserted is borked/don't normally work. He's always telling me to load paper.

    I tried to lift the locking lever to see if I could advance the paper and do recognize it, but had no luck.

    The plotter was sitting idle for several months during the summer.

    I can't find documentation on this problem. Is this typical? It's just a bad sensor? What?

    I used previous generations of this tracer a lot in the past and would call me as at least a moderate user in advanced. I've never had this problem

    Advice? Patches? What is it going to cost me, since I'm now out of warranty? It's a little irritating, as I ran less than 50 feet of paper through this thing - I don't expect that broke quickly.

    Thanks in advance!

    Problem solved thanks to another thread.

    OOP sensor has been disconnected. No doubt some students unplugged knucklehead.

    Thank you! Sorry!

  • JPG of Windows Photo Gallery will not be printed in black and white / grayscale, than by the color.

    All of a sudden, for some reason unknown to me, my mon imprimante printer does not print images JPG from Windows Photo Gallery black and white or grayscale. No matter if I turn it on to or black and white color option / shades of gray option, it only prints in color. If I remove the color of my printer ink cartridge and leave the black alone to, and order the printer to print in black, the printer behaves as if it was printing but the page comes out blank.

    If I try to print, for example Word documents in black and white / shades of gray, they come out, as requested.

    Help, please! Thank you.

    Hi Ulap,

    A. from when what happens?

    B. you are able to print the other black and white file formats?

    First of all, check if you are able to print black and white photo viewer.

    Then, run an auditor of system files (sfc scan) on your computer in order to replace the files corrupted on your computer.

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11. once the scan is finished, close the command prompt window reboot the computer and check if the problem persists.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Windows 7 photo viewer will not be printed

    Everything prints OK.
    Photo Viewer gives the following from their selection error message... 'Print '.  That is to say BEFORE the print dialog box and before a printer is selected. The error message is "Photo Viewer cannot print this picture because there is no printer installed, or a service that Windows needs is not running."

    Obviously, the printer is installed (prints everything else), if this service is not running.  Or is there something else?

    Any ideas gratefully received

    Concerning

    SJ

    PS (I found a similar request, but the response was not not applicable in this case)

    Hi sj_morris,

    a. what happens when you right-click on the image and select the option print?
    b. you are unable to print photos specific or all the pictures on your computer?
     
    You can try the methods one by one and check them off below if it helps.
     
    Method 1: Update printer drivers.

    1. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. in the list of hardware categories, find the device you want to update, and then double-click the device name.
    3. click on the tab driver, click Update driver, and then follow the instructions.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    You can also download and install the latest updates from the site of the factory.
     
    For more information visit http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
     
    Method 2: Make sure you have a default printer.

    1. open devices and printers, click the Start button, and then click the start menu, click devices and printers.
    2 right-click the printer that you want to use and then click on set as default printer.

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
     
    Method 3: Reset the print spooler.

    To restart the print spooler service, follow these steps:

    You must be logged on as administrator to perform these steps.

    1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
    2. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. right click on the print spooler service, and then click Properties.
    4. on the general tab, next to startup type, make sure that automatic is selected.
    5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, visit the links below:
    http://support.Microsoft.com/kb/2000007/en-us
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  • HP Envy 5660: HP Envy 5660 will not be printed on cardstock

    I just spent over an hour on the phone with tech support trying to 1 million different options to allow me to print. A week ago, I bought this printer to print on cards for the baptism of my son (in 2 days) and he refuses to print on thick paper. Technical support tried different drivers, printing through the viewer of PDF, Word printing, printing of a multitude of different parameters, since the photo tray, since the main tray, wireless, USB, etc. Nothing WORKS! I need to get there as soon as POSSIBLE. I find it very difficult to believe that this 'thing' print on photo paper but impossible to print on card stock of all things. Help, please! If HP someone sees my case number is 3028801369. Thank you.

    Hi @mirurzun,

    Thanks for joining the Forums of HP Support for a solution to your printing problem.

    I understand that you use a HP ENVY 5660 e-all-in-one printer with a Mac OS X 10.11 El Capitan computer and you cannot print on thick paper with success. I would like to help with that.

    I went and checked the case created by the agent who you work with. He noted that the end of the document appeared at the top of the card stock, but when you use plain paper it printed fine.

    I called HP ENVY 5660 e-all-in-one printer (F8B04A) specifications and found that cardboard did not appear as a type supported media which is probably why you are not able to make it work.

    If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • why I can't take a new picture and I can't remove all the images of photos.new will not be saved

    why I can't take a new picture and I can't remove all the images of photos.new will not be saved

    Check your storage space on your iPhone, iPad and iPod touch - Apple Support

  • I have a canon shot power and my computer will display the photos but will not play videos

    When I put my memory card in my computer it will play my photos but will not play video. It says cannot play video and windows media ceter cannot open the file. can anyone help?

    When I put my memory card in my computer it will play my photos but will not play video. It says cannot play video and windows media ceter cannot open the file. can anyone help?

    ======================================================
    More than likely that the video is a format that is not supported on your system.

    Foe example... If the format is MOV, which is Apple's QuickTime format...
    It may be interesting to try to download and install Apple's QuickTime Player.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Apple QuickTime
    http://www.Apple.com/QuickTime/Download/

    Or you can download and install the free VLC Media Player which
    play almost anything:

    VLC Media Player playback features:
    http://www.videolan.org/VLC/features.html

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (32-bit Version)
    http://www.filehippo.com/download_vlc_32/
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.0.5 - win32.exe)

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (64-bit Version)
    http://www.filehippo.com/download_vlc_64/
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  • my windows live photo gallery will not let me enlarge my photos can someone help me.

    my windows live photo gallery will not let me enlarge my pictures he always tells me, Photo Gallery can't open this photo because you don't have permission to access the location of the file can help you. I don't know what has changed because it was ok.

    No guarantee... but following Microsoft "don't fix" may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Windows Photo and slideshow problems
    http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  • My videos won't play in the screensaver, shows photos and videos first photo but will not play screensaver

    original title: screen saver

    My videos won't play in the screensaver, shows photos and videos first photo but will not play screensaver

    My videos won't play in the screensaver, shows photos and videos first photo but will not play screensaver

    Take a look at this. The converter is FREE.

    http://www.question-defense.com/2009/06/29/Windows-Vista-free-video-to-screen-saver-converter-convert-WMV-AVI-MP4-to-Vista-screensavers For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Windows Photo Gallery will not save the edited images

    Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

    Message says photo library was beset with problems and the modified file cannot be saved

    Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

    Message says photo library was beset with problems and the modified file cannot be saved

    ================================================
    Windows Photo Gallery... Cannot save modified photos...

    No guarantees and proceed at your own risk!

    Good luck...

    --

    (1) try to do a system restore to an hour before
    the problem started.

    With the help of the Windows Vista system restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    --

    (2) I've seen reports that this problem may be related
    Kodak Easy Share software. Installation "Kodak
    Single-action Version 8 for Windows from the
    the following link may be the solution.

    Kodak Easy Share 8 software version
    http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
    (FWIW, it's a good idea to create a system)
    restore point before installing software or updates)

    --

    (3) I saw reports that could clarify the next steps
    until the question...

    Right click the library icon and choose
    "Run as Administrator"

    --

    (4) I copied the info from a tech forum on
    the net... I don't know if it works, but maybe it's
    worth a try:

    A. right click on Task Manager open the
    taskbar on the bottom of your screen and choosing
    The task in the menu Manager.

    B. click the tab process, along the upper part of the
    The Task Manager screen.

    C. in the process tab, select the corresponding button at the bottom
    left of the screen that says "show processes of.
    all users"and click on it. Click 'Continue' to the UAC
    the prompt that appears.

    D. the screen should turns off a moment, then
    back with much more than process listed. Click
    the "Command line" column to sort the list and
    Search:

    "C:\Program Files\Windows Media Player\wmpnetwk.exe"

    Read the description in the next section on:

    Windows Media Sharing Service reader network

    F. click on this process. Click the end «»
    Treat button"at the bottom right of the screen.
    Confirm 'End process' if necessary.

    You should now be able to save your changes to
    your photos normally. The bad news is that this
    should be performed whenever you start or restart Vista.
    And I don't know how to prevent the situation from
    in the first place of loading.

    --

    5) posted by: artologik
    The solution came to me when I could not recreate
    the problem on a laptop with Vista Home.
    Everything I could compare, I noticed that the
    %Path% environment variable was not between different
    the 2 machines.

    I guess that WLPG relies on the dll must be found
    on the way to the system; When not found, it must return
    Back to ' base or incomplete "library finds it
    the default specific paths or the user. The solution for
    me has been to ensure the entire path system
    to the folders in the order appropriate.

    To fix, follow these steps:

    A. right click on the COMPUTER icon on the
    desktop and choose PROPERTIES

    B. choose ADVANCED SYSTEM SETTINGS

    C. Si you are prompted by UAC to allow, go ahead.
    and ALLOW

    D. click on ENVIRONMENT VARIABLES...

    E. in the bottom half, under SYSTEM VARIABLES,.
    Find the PATH variable and highlight the

    F. click the button CHANGE

    G. ensure that what starts with
    % SystemRoot%\system32;%SystemRoot%;

    H. ensure you that a semicolon separates each entry.

    I. click OK three times

    J. restart the computer

    Good luck...

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Difficulty for eFax print on Photo paper and not ordinary paper

    If you have recently faced the issue where when you receive an eFax, it is print on photo paper and not ordinary paper, it is because your account is configured to receive jobs as a .tiff instead of .pdf files files. If you wish to have this resolved, send me a Message private with the following information:

    • Customer name:
    • EFax number:
    • New or old account:
    • When he started to question:

    This should solve the problem for you.

  • LaserJet Professional P 1102w printer green light blinking, but will not be printed

    I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

    But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

    I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

    Help, please.  Thank you.

    Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

  • Just upgraded to El Capitan. Now my MF4350 (USB) will not be printed. He maintains a break himself. I have tried reboot, power, re - install drivers, etc.. Suggestions?

    Just upgraded my MacBook OS to El Capitan, 10.11.3 iOS 2009. Now my Canon MF4350's (USB connection) will not be printed. When I try to print, it says 'Printing' and turns then to ' break. "It scans fine, using the MF Toolbox.  I have tried rebooting, disconnect and reconnect the printer, turn on and turn off and I have uninstalled and reinstalled the drivers, etc. An other all-in-one (brother), I have at home will work as before my upgrade. My other apps seem to work normally, Suggestions?

    Adding the printer screen says UFRII LT.

  • HP Pavilion: spooler will not delete print jobs

    Printer spooler will not delete print jobs.  The status is: Error - sent to the printer.  Canon has tried to help by using several methods to remove print jobs in the spooler.  None of them worked.  What I can do next.  Thank you

    Hello

    Please click HERE to access the procedure which should solve the problem.

  • my printer is working, but it will not be printed in color and a new color cartridge is installed.

    HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

    The steps in this troubleshooting page can help solve the problem.

Maybe you are looking for