HP envy 5545: envy 5545 off paper msg on the color photo prints

Similar Questions

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• As if paper jams in the two sided printing mode

  HP Officejet Pro 8500 has Premium

  Windows 7 64 bit

  Paper jam

  When I try to copy or fax from the document feeder, the document tries to recharge as in print mode both sides, however, only mode is selected. When the paper is trying to load a paper jam message is generated and pray a reloading of the document.

  I'm sorry that you are having this problem with the printer. Here is a document that deals with paper jams when you use the ADF on the printer. It will provide troubleshooting steps to try to solve the problem. I hope this helps. http://goo.GL/MXWnM

• HP ENVY 14 LAPTOP - cannot change the color of the menu of win 7

  Right now I know it is a HP support forum but I have a HP laptop and desktop and I really hope someone here can help me really...

  Good one a few months ago I bought a HP Envy 14 laptop and I must say that I really liked it. Then a few days ago, I just bought a HP desktop computer (can tell you I'm a fan of HP) and I love it also.

  Here's my problem...

  On my desk, I decided to change her look, so I installed a custom theme (dark theme) and it changes the appearance of windows 7 and changed the color of the lower menu/taskbar of windows 7 in black and I really liked it. I decided to install this theme on my laptop and everything has changed except for the background color of menu/taskbar of windows 7 botom. For some reason any will not change the color of the menu bit matter what I do.

  I tried to go to:

  Panel-> personalization-> change the color of window glass

  and by selecting a different color but not matter what color I select windows 7 background menu/taskbar does not change it remains just the grayish color of say her since I got the laptop.

  Now, why this work on my desktop but not on my laptop?

  There must be a setting on windows 7 that prevents me to change the color of the lower menu/taskbar. Still worse firefox is horrible. I can not change the appearance of firefox, whenever I have try and install a new firefox theme does not change. On my desk, I installed a dark theme for firefox 11 (the Nasa Night Launch) theme and it worked very well but for some reason any on my laptop, nothing seems to work just...

  I really hope that someon can help me with this because it makes me crazy...

  I want to thank you all for your time and help,

  gh0st-HP

  DragonFur, I want to thank you for your time and your answers, you should know that it meant a lot to me.

  After doing a lot of work and trial and error, I finally found a solution to this problem...

  I did a lot of googling and research and what I found is that there are many people out there who are owners of laptop HP Envy 14 who have trouble changing the color of their windows 7 start menu/taskbar or with the taskbar is not not transparent.

  Here are some of the things I tried.

  1 Installing different themse (did not work)

  2. Update driver for ati radeon 5650 graphics card (did not work)

  3 tried to adjust areo ensuring transparency has been activated (did not work)

  4. tried to bios update (did not work)

  5 tried to use a program to change the color of the bar tasks (did not work)

  What I ended up doing is creating a new user to the administrator and when I created this account is a program called "stardock mypaint" come asking me if I wanted to use this program to change the original theme for windows. When I said this software to change the original theme of windows 7, it changed my taskbar to the greyish appearance, it was the same off-white color I had on my account I tried to change. So I went back to my account and I searched for the program "stardock mypaint" and I have disabled this theme and then he changed my windows operating system 7 to an original blue theme but the taskbar was transparent! Then I went into my themes and changed the theme I wanted and my taskbar has changed color and transparency! Needless to say I was so happy.

  I really hope that this post will really help someone else who is trying to solve this problem...

  HP I really hope that maybe you guys can watch this program "Stardock MyPaint" which I think may be for HP Envy 14 laptop computers and allow users to know that the use of this program can affect other issues.

  Isn't funny how the solution to the problem is always the simplest answer...

  I knew there was something in the windows that kept my taskbar to be transparent and changing colors and it turns out it was a program of HP.

  Yet once I really hope this helps someone else out there and I'm hoping that HP employees this will read so maybe they can help each other if someone falls on this problem.

  DragonFur, thanks again for your help...

  gh0st-HP

• HP Envy 4500 series: print 'Photo printing without borders' and 'best quality '.

  Problem: It only prints in the borderless Photo printing option.

  Text in black it prints appears in gray.

  It prints only in quality adjustment 'Best '.

  The test (after cleaning the print head) page shows the 6 colored rectangles but no black text.

  I cleaned the print head, uninstalled and reinstalled the latest version of the software.

  The cartridges are NOT original HP cartridges.

  Of course, color works fine.

  I replaced the black cartridge with a new one, twice.

  I can buy a new printer for the price of these replacement cartridges.

  Should I worry about trying to fix this problem or should I throw it out the window?

  In the here document troubleshooting steps can help solve the black print is not on your printer 4500 desires.  Note that when printing in paper mode Photo black cartrdige is not used because the black pigmented ink is not compatible with photo paper.  If the photo paper is selected the pritner will use color ink to print in black.

  My guess would be that you have a black cartridge faulty, not unusual for third party cartridges *.  You can try to mop up the printhead on a damp cloth.  A good cartridge would have a strong black ink spot.  You may be able to recover the cartridge by soaking the print head in warm water, nozzles down to the 1 "of water for about ten minutes.  After soaking, dry the electrical contacts and reinsert into the printer.

  * See http://www.buyerslab.com/products/samples/HP-Inkjet-Cartridges-vs-Refilled-Cartridges.pdf

• On the Color LaserJet Pro CM 1410 Series HP printer paper jam

  I can't find/see the paper jam on the color HP LaserJet Pro CM 1410 Series printer.  I checked the domains listed in the manual, but there is no sign of my envelope paper jam.  Y at - it info on how to do to remove the outside cover to try to find the jam?

  The documentation provided by HP for a paper jam in the CM1410 series, I chose the CM1415fnw in this list of series as my example, can be found here.  HP does not have a document that has a complete failure of the product.

  I hope this helps.

• Problem of photo printing on plain paper

  My printer prints not clearly the picture on plain paper.

  The color is set to automatic, after printing, colors are distorted, lines appear in print!

  I was always able to do so until recently.

  Any help would be greatly appreciated please!

  Went to the local Agent of HP where he advised, that I need a new print head which cost about the same as a new printer... quite disappointed because my printer is 3 years old.  I did not had the extended warranty, believing the printers HP are reliable sound for at least 4 years.

  Have now bought a new printer HP hopes this solves my problems

  Thank you for your help

• Using layers to combine color photo on lined paper - loss of color

  I'm doing a guest design book for my mother's wedding. I have a picture that I want to combine on lined paper (created with Word and digitized. Saved in PDF). I was going to change the opacity of the photo to make it lighter while bringing in lines in the image below. I renamed the picture so there was more background, selected, copied and pasted on my white, bordered with image and the color photo, then became a black and white grainy. Otherwise, I could have put the photo on a white background and change the opacity to lighten it and then lines on the image, but it did not work as lines has not been out of uniform. Would really appreciate help! I have a couple of PSE books, but I'm still stuck. I use PSE 12.

  Thank you!

  Assuming that your double image is black lines on white background, place the image doubled over the image in the Palette layers. Change the opacity of the image doubled to multiply. The lines will be displayed and the image without change.

  It is an older version of PSE so my Palette layers will be different from yours, but the result should be the same.

  -What are you trying to do?

  

• HP Envy 5532: Power paper

  Can anyone tell how to tighten the slot on the HP Envy 5532 to adapt the width of A4 paper to reduce the movement and the center of the sheet when printing paper?

  Hi @Ptt2!

  Welcome to the community of HP, I hope you have a pleasant experience here.

  I understand you have some problems with the movement of the paper causing a tilt when printing on A4 paper with your 5532 eAll-in-One HP ENVY printer. I'd love to help you with this.

  See the second step > number 5 > 4 Figure in the following document.

  "HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e-all-in-One Printer Series - a Message ' Out of paper ' is displayed on the control panel and the printer doesn't pick up paper

  This shows where are the paper guides and how to adjust them.

  If you have the time, I would also take a look at the rest of the document, as there are a lot of tips and tricks to help resolve supply problems you may experience with your product.

  Please reply to let me know if this has been helpful!

  

• HP envy 4500: direct printing without having to change the wifi to printer

  To print on a HP Envy 4500 from an Air iPad with iOS8, should I switch my network wifi to the printer whenever I want to print something?
  For example through my email, there are several emails, each with an attachment that I I want to print. I choose my network WiFi, open the email attachment, return to wifi-changing the settings of printer-go back to the document and print it. Wait for it to print. To return to the e-mail, I return to settings-wifi-changes in my next email open network. Then go through the process of return to the printer.
  There must be a simpler way to use "direct print", but when I try to print in the document, he says "no printer found AirPrint."
  Thanks in advance.

  Hello CdnCreekers,

  It seems to me that you print to the printer WiFi Direct printing option. There is an easier way...

  To begin with, I would turn off WiFi directly from the front panel of the printer > select direct WiFi, then turn it off.

  I assume you already have your printer connected to your wireless network, if that's the case, then you just need to print from your iPad. The iPad must be on the same network as the printer to use Apple's Airprint wireless.

  WiFi Direct is a great option for guests to use, but you don't need to have it on in order to print wirelessly on your printer.

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• HP Envy 4504: Envy 4504 photo prints too red with print quality = better

  Hello

  I hope someone can help.

  On my HP Envy 4504 photos are printed OK print normal quality, but when the print quality is set to best photos are printed to the red. In addition, with DPI Maximum printing photos are much too red.

  This takes place two times printed on paper Normal and on Photo paper

  With the GIMP, I tried to make an example of how a photoprint looks like.

  I made the example by changing the color Balance: Red cyan - about + 40:

  (my GIMP is Dutch...)

  

  Here is the result:

  LEFT: Photo printed in normal quality; Photo on the RIGHT printed in better quality:

  

  I have already completely remove the software HP Envy and did a clean reinstall. No change.

  I have print-head - cleaning cycles (2 times); color of HP-testprint strips looks very good: all are strong in alignment is correct

  Unfortunately: No picture change in best quality still too red.

  The ink levels are okay.

  Any suggestions what is wrong and what can solve this problem?

  Thank you for your support

  Kees-Jan Timmer

  Hi @Kees-Jan,.

  Welcome to the HP Forums!

  I noticed that your HP Envy 4504 prints photo is too red with print quality = best on Windows 10 operating system. I'm happy to help you!

  Where a setting is disabled, with GIMP, have you tried to print photo quality with other programs? If so, what happened?

  You use genuine HP cartridges or refills?

  None of your ink cartridges are low or empty?

  In the meantime, please make sure that all the steps in this guide, fixing poor print quality are executed. And let me know what happens!

  Thanks for posting and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• HP envy 4500: color photo printable

  I am trying to print a picture on paper glossy 4 x 6. I get a message that the minimum margins are not fulfilled and it will not print my picture. I searched HP for more information but can't find anything on this problem. Can anyone help?

  Rhody81

  Hi @rhody81,

  Welcome to the Forums of HP Support!

  I see that you are unable to print photos of 4 x 6 with your HP ENVY 4500 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you get an error message. The error message indicates that the image is trying to print within the margins of the printer preset.

  Please, try the steps in these guides:

  • Print Photos stored on your computer (Windows)
  •  Change the print settings (Windows)

  Load photo paper

  1. make sure that the paper tray is open.

  2. slide the width guides to the paper to all open.

  3. remove all paper from the tray to paper and then load the photo paper with the side to be printed on the bottom.

  4. press the photo paper in the printer until they stop.

  5. slide the width guides to the paper firmly against the edge of the photo paper.

  To print a photo on photo paper

  1. on the file menu in your software, click on print.

  2. make sure that your printer is selected.

  3. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer, or preferences.

  4. Select the appropriate options.

  ● On the Layout tab, select the orientation to Portrait or landscape.

  ● on the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar and select the print quality in the quality settings area.

  ● Click Advanced to select the appropriate paper size from the paper size drop-down list.

  NOTE: For maximum dpi resolution, go to the paper/quality tab, select Photo paper in the media drop-down list, and then select Best quality settings area. Then, click on the Advanced button and select Yes in the print in the drop-down list DPI Max. If you want to print the max DPI in grayscale, select high quality grayscale printing in grayscale in the drop-down list.

  5. click on OK to return to the Properties dialog box.

  6. click OK and then click on print or OK in the print dialog box.

  NOTE: When printing over, remove unused paper from the tray paper. Store photo paper so it does not start to curl, which could reduce the quality of your print.

  14 Chapter 3 Print ENW

  Source

  Supported paper formats

  Type of paper

• HP 4500 envy: photo printing

  I bought a hp envy 4500 Saturday mainly for printing photos. I got some pictures already saved on my laptop and when I try to print out smaller as they should be, even if I set the size of 6 x 4 paper and size of the image. It seems to be the right size on the preview before printing but still comes out smaller.

  Thank you very much

  Ian

  Hello

  What software are you using to print? Please use HP Photo Creations (that came with your printer) to print.

  Kind regards.