HP ENVY 5640: Several Questions in 1 post: Types of paper, paper thickness, length of paper

Similar Questions

• Envy 5640: Envy 5640 draft output

  I am trying to save the ink in the cartridge and use, draft mode, by changing the setting seems to make no difference in the quality of printing, I just tried a race 200 A4 sheets using two standard nine 62 HP cartridges, color & B and W, and the printer collapsed to 175 pages, lack of ink.

  Had the printer two months, KODAK printers previously used when project machine could expect to almost 400 sheets to the same calculation.

  The Envy range dedicated parameter hidden away somewhere?

  Hi @David_E,

  Welcome to the HP Forums!

  I noticed that you wonder why you get only 175 pages with your 62 HP ink cartridges with your printer HP Envy 5640. I'm happy to discuss this issue for you!

  According to the specificationsof this ink cartridge, the yield is 200 pages. If you get a HP 62 XL performance is rather up to 600 pages. HP 62XL high yield black ink cartridge Original.

  Please consult this guide, measuring inkjet printer Page gives on how these estimates are measured.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• HP Envy 5640: HP Envy 5640 how to connect to the Windows 10 laptop

  Hello.

  I hope you can help me, I have my new printer all set up with my office and it works perfectly, (Windows XP) but I recently bought a new AcerAspire 17 Windows 10 laptop and have tried to connect my printer.

  On my laptop, I went to add devices/Printers and he picked up my printer but it asks me to put a WPS pin, he says that it is in the information that I had with my printer, but I've looked everywhere and I can not end or see anything related to the WPS pin code.

  Please help me.

  Thank you very much

  Sincere wishes

  Barbara

  Welcome to the HP community @BarbaraJean1,

  I read your post on the questions that you face when you try to connect your 5640 desire computer Windows 10 via your wireless network, and I want to help!

  I suggest trying the method of configuring wireless, or USB wireless to set up the printer. Check the link I posted for you to see your options and how to properly connect the printer.

  Setting up the printer on a wireless network for the HP ENVY 5640 and WANT 5660 e - all-in - One Printer Series

  Please let me know the results of all the steps, and I will do my best to help you further, if necessary

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• Want to 5640 e - Allinone: HP Envy 5640 cannot print without problem indicated

  My hp wireless want 5640 e - Allinone scanner/printer all of a sudden couldn't print more with no error showing.

  This printer has been used very frequently and it used to work well.  However, I kinda stopped using it for about 2 weeks, and today when I tried to print, whenever I sent a document to print, the printer status showed 'Impression' and suggested that the documents have been printed successfully; However, the printer was actually nothing.

  I tried to uninstall/reinstall the hp printer driver for several times, used hp print and scan doctor showing all the controls without error, turned off the firewall, checked the wireless connection for my laptop and the printer and even used a USB to connect my laptop and printer, but still failed to get a response from the printer.  Fortunately, he was able to print an internal test page by printing HP and scan doctor, but not a test page.  In all these processes, the State of the printer was still showing indicating "Ready" for printing without error.

  On the other hand, my printer have been able to print several documents sent from computer laptop of my roommate via connection Wi - Fi, and my laptop would have also ordered my roommate, a Canon one printer, to print via wifi.

  This situation has botherd me all night and I'm actually much more dependent on the printer now that the school year has started.   I really hope that someone can solve my problem and I would appreciate his helpfulness.  Urgent need of your help!

  Thanks in advance,

  Willow

  Hey Willow.

  I see that you are having a problem wireless printing using your printer HP Envy 5640.

  If your roommate can print using your printer wireless, then I think that there is nothing wrong with his connection.

  To restore the State of your printer, you can try to do a Hard Reset. Simply unplug the power cable from the wall outlet, then to the back of the printer. Wait at least one minute, then plug it on both ends. Normally the printer will power on automatically. If this is not the case, simply press the power button.

  Blue wireless light should remain solid, once the printer is powered completely.

  On your PC, go to run by pressing Windows + R keys on your keyboard.

  Type services.msc and Services window should appear.

  Restart the services listed below by right-clicking on them and selecting restart. If it has not started yer, select start.

  1. print spooler

  2 IP Helper

  3. web client

  4. network access protection agent

  Try to print all your documents and see if it will work.

  Hope this will help.

  Nice day!

• Want 5640: HP Envy 5640 and Direct wireless

  My printer HP Envy 5640 is able to connect using direct (http://www8.hp.com/ca/en/campaigns/wireless-printing-center/wireless-direct.html) wireless or not?

  When I print the HP Network Configuration page, I see "Wi - Fi Direct '; This topic, 'Status' and 'Security' are both 'On '.

  The results of the Test network wireless, I see under 'Network', he says 'FAIL' to "Network Name (SSID) Found".

  I try to use the University to my home wireless connection and don't have available router information...

  Will it end with a USB key to connect my computer to the printer?

  I think back to this printer as this question has been very frustrating.

  If you can help, let me know. Thank you so much in advance!

  Read the manual for this printer supports wireless Direct. Just read page 59 of the User Guide to set up. However, you have the choice to your computer. Connect to your Wifi to Internet OR connect to the printer via the wireless Direct, not both. One or the other. We suggest that you use a USB cable.

• Several Questions about Visual Studio Express 2012

  Hi, I have several questions about Visual Studio Express 2012.

  1 is. each product (for the Web, Windows Phone, Windows 8, for office, etc) of Visual Studio Express 2012 using the individual installation package? Do I have to do the installation for each product? Is there an integrated package for all these products?

  2. the IDE of Visual Studio Express 2012 there a difference with other versions of charges, such as automatic and semiautomatic filling?

  3. don't Surface Pro 128 G meets the minimum hardware requirements for Visual Studio 2012 requirements and Visual Studio 2012 runs smoothly on Surface Pro?

  4. What is the difference between full MSDN and essential version in detail?

  Thank you.

  Hello

  Please post any questions about Visual Studio on the following forums.

  Category Visual Studio:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Concerning

• Satellite U405D - several questions about overheating/disassembly/upgrading etc.

  Hello

  I have several questions about my old one by Satellite U405D-S2910

  1. when it works, after 2-3 hours (I run usually small programs such as safari, msn messenger and bsplayer) CPU gets 85 to 90 C (178-188). When I play age of Empires 2 (come on, its an old game) like 2-3 hours, it stops. What could be the possible reason? Furthermore, let me inform you about the climate of the city I live, 30 c temperature - humidity 25-35% (today).
  PS. CPU is AMD Turion 64 X 2 Dual-Core Mobile Processor. Model RM-74

  2. I'm going to disassemble my laptop in order to clean its cooling units (I think at the rate of overheating is this). It does seem like a desktop computer, so complicated. Ive seen a disassembly not to not (btw, its so difficult to spell dismantling :) I think Im going to do this. What are your suggestions on this subject? experiences could help me?

  3. my laptops is Ram 2x2gb PC5300 DDR2 667 MHz SDRAM memory, I want to replace RAM memory 2x2gb MACH XTREME DDR2 1333 MHZ CL9 NOTEBOOK. Should I do it? Fit my portable, stable work? any suggestions?
  PS. motherboard chipset AMD M780V

  4 - Finally :), should I use OS 64 - bit or 32-bit OS (win7)? what OS would you use if you were me?

  Thank you.

  Hey Buddy,

  1 + 2. I think everything is related to a higher internal temperature and you must clean your laptop using a jet of compressed air. That is why it s not necessary to remove, just blow softly and soon the air through the laptop. You can buy such compressed air which squirts of each computer store I think and it takes only 5 minutes.
  You can find a useful article about this here:

  3. in my opinion he should forget this update! The speed of the RAM is related to the FSB of the CPU and as much as I know about Satellite U405D it s 667 MHz so it s already the RAM faster than you can have. Save your money and buy a larger HARD drive or in the best case a SSD that can really improve the performance!

  4. in my view, the answer is clear: Windows 7 64-bit.
  Only a 64-bit OS supports full 4 GB of RAM. ;)

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• HP Envy 5640: Hp envy 5640 connected but now requires the password

  HP envy 5640 now requires the same password that is connected to the network. Tried to enter the password for the network; It did not work. Tried to reset the default value of such network suggested by forum; still does not work
  
  How to run again?

  HI @z281.

  Welcome to the Forums of HP's Support. It is strange that your printer requires the use of a password.

  So that I can better help you, I know what you are trying to do and when you are prompted for the password.

  In addition, you have iOS as your operating system. What version?

• ENVY 5640: HP ENVY 5640 - cannot print more

  Hello

  I have a HP ENVY 5640 I had setup was working fine before.
  I have not used the printer for a few weeks, but there is no problem with the ink cartridges.
  The part Scanner works fine.

  I can't print anything more and I do not understand why.
  PowerPoint, gives me the following error: "we have found a problem with your installation of the printer and could not print.
  I tried the printer with word and acrobat reader and nothing going on (not even an error message)
  I ran all the tests in diagnosis using HP doctor, I tried to receonfigure the network settings, I tried to uninstall

  Reinstall the printer as a USB and a wireless printer, I even tried to disable the firewall and nothing seems to

  make it work.
  With the doctor of HP, the test page prints fine, but otherwise nothing printed.

  I am really confused and a little frustrated because I really need to print some papers tonight.
  I just spent 2 hours trying to fix it without any luck :-(

  Could you please help me?

  Thanks in advance.

  Hi @RS25,

  Thanks for getting back to me.

  I thought it had something to do with the corruption on your computer. I'm glad that you were able to determine the cause with my suggestions.

  I would like to use this guide:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply to this message with the results.

• HP ENVY 5640: Choice of a default configuration

  I changed a few settings to my favorite default Setup, but that translates into a personalized user layout that I renamed the default.  Now, I want to score which by default to use when printing is called.  How can I do?

  Hi @AnneW,

  Welcome to the community of HP.

  I understand that you want to change the settings for default print to your HP ENVY 5640. I'll be happy to help you.

  This link offeres instructions change the print settings.

  HP printers - print (Windows 8) settings change - steps should work for Windows 10 as well.

  Once you have completed the steps in the link above, please get back to me with the results.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• HP ENVY 5640 series: series HP ENVY 5640

  Printer series HP ENVY 5640 suddenly not work or projection upward on wireless network. It connects to the BT hub but the IP he shows is different than on the hub, so that is why it is not found by phone printer

  It worked, so not sure what has changed

  Hello

  Please click HERE to access the procedure which should solve the problem.

• HP Envy 5640: Photographic proofs are a little red

  I'm doing some photographic tests on HP Premium photo paper glossy. I replaced my Photosmart D7360 printer with 5640 desire. I see that I can't choose the paper actually, only HP photo paper. I print from Photoshop and choose Photoshop manage colors. My screen is calibrated. But the prints come out with a little red.

  I know this isn't a photo as the photosmart printer printer, but it requires to get Lab quality prints. The prints look good but a little red.

  I also tried with "the printer manage color" but he looked the same.

  Is it possible to do something about it?

  Can say also that I wanted a new Photo printer, but it seemed that HP sells not only anymoore of the series.

  Hi @Tomo53,

  Welcome to the Forums of HP Support!

  I see that photos come out too red with printer HP Envy 5640. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration that this must be the cause of you. To clarify the HP Envy series replaced the Photosmart series. I am pleased that you made sure that your screen is calibrated.

  What kind of paper do you use?

  In order to determine whether the problem is with the print settings, or the driver, I would make a copy to see if the photo copy correctly.

  Trying to copy a picture to test the (photo with perfect colouring) functionality:

  • Copy of Documents or Photos with a HP ENVY 5640 5660, 7640 e - all - in - one, HP Officejet 5740 and 8040 e - all-in - One Printer Series
  • Make sure the paper type is correct.
  • What were the results?

  Supported photo paper

  To avoid jams paper and other issues, make sure that you use the right type and size of photo paper when loading tray main, entry and photos.

• Password wireless HP Envy 5640 direct change

  Good evening

  A demonstration event, I want to change the password of my HP Envy 5640 live wireless, or delete the password completely. Is there a way to do this?

  The printer is correctly installed, wireless. I have a laptop with Windows7 64 bit.

  Thanks for helping, cordially,

  Roland

  Hello

  Thanks for your reply. But this option is not available in this printer. In the Photosmarts series, it worked like that.

  You can change the password to a staff. This is possible if your connection to the printer with its IP address in a browser.

  Best regards

  Roland