HP envy 6: after installing synaptic touch driver my touchpad does not work

My hp envy 6 always automatically update software and after upgrading of the synaptic driver, touch pad doesnot work at all. After that, if I uninstall synaptic driver it works again, and problem is every day automatically portable install synaptic driver

Dear customer,

Welcome and thanks for posting your question on the Forum of Support HP

Looks like you are facing difficulties to solve problems with your laptop Touchpad

We will surely help you with this

Steps to drain the static charge and load the BIOS default settings to solve the problem

Step 01. Turn off the laptop

Step 02. Disconnect the power/AC adapter and also remove the battery too

Step 03. Press and hold the power button of the laptop for a minute

Step 04. Now re - insert the battery back in and plug again the power supply/adapter

Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

Step 08. Now, please wait until the unit load the Windows operating system

Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

Please click the link below to learn more the following steps to resolve this problem of troubleshooting

http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5229455&calledBy=&docid=emr_na-c03523373-5&docLocale=

Hope this helps, for other queries in response to the post and feel free to join us again

* Click on the white button on the right to say thank you Thumbs Up *.

Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

Thank you

K N R K

Although I am an employee of HP, I speak for myself and not for HP

Tags: Notebooks

Similar Questions

  • After turning on the computer, the Touchpad does not work until I have press a key on the keyboard

    Original title: Touch Pad issue

    Hello

    Every time I turn on the computer touchpad does not work (in the form of connection), first I press any key on the keyboard once I press a button and then press the mouse will start to work, I don't know what exactly is the problem... I reinstalled the drivers, checked in services but still the same. Can someone help me on this.

    Kind regards

    NGO

    Hello, NGO,

    Changes were made on the computer before the show?

    Method 1:

    Run the hardware and devices Troubleshooter and check if that helps.

    Method 2:

    I suggest you to return the item and check if it helps:

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

    Let us know if it helps.

  • After installing the Vista SP2, IE 8 does not work well.

    After installing Vista SP2, IE 8 under my.live.com does not work.  The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped.  I went to run a complete Internet security suite uninstall Trend Micro and put it in a plain Jane anit-virus program.

    I would like to keep the functioning of IE8, but switch to FireFox, if I need to see my RSS STREAM or do some serious web browsing.

    In addition, Live Messenger is no longer connect either.

    Is there a way I can safely roll back my system to SP1?  I can't live without Vista SP2.

    Hi Geekster,

    Please use the forum for Support of Vista,

    IE 8 is not a part of Vista SP2.  You can remove SP2 without removing IE8.

    Here are the steps to uninstall SP2
    Method 1: Uninstall the service pack of Windows Vista by using the programs and features item in the easiest control panel to uninstall a service pack for Windows Vista is to use the programs and features in Control Panel. To uninstall the service pack of Windows Vista by using the programs and features in Control Panel, follow these steps:

    1. Click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the programs list.

      If you are prompted for an administrator password or a confirmation, type the password, or click continue.
    2. Click view installed updates.
    3. Click the service pack that you want to uninstall, and then click Uninstall.

      If you don't see the option to uninstall for Windows Vista service pack in the list, go to method 2.

    4. Follow the instructions that appear on the screen to complete the uninstallation.

    If method 1 does not allow to remove SP2, try different method in this article:
    http://support.Microsoft.com/kb/948537

    Let us know if this helps,

    Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

    I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

    The requirements for the SuperDrive Apple USB are:

    The system configuration required

    Compatible with the following computers:

    MacBook Pro with the Retina display

  • Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

    My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

    Can you help me solve the my problem please?
    Excuse my bad English...
    Thank you
    Jorge Neto

    HI Jorge,.

    If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

    Kind regards

  • After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

    After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

    New Aspire E11, Windows 8.1

    Help, please.

    Here is how I fixed it:

    Go to control panel > network and Internet > network sharing Center

    Click on "Change adapter settings" in the left pane.

    Right click on your map. Select "Properties".

    There will be a box titled "this connection uses the following items."

    Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

    KEEP THESE CHECKED:

    Client for Microsoft networks
    QoS Packet Scheduler
    File and Printer Sharing
    IP v6
    Internet Protocol v4
    Driver Link-Layer Topology Discovery map IO
    Link-Layer Topology Discovery recall

    Uncheck everything else.

    Go to network and sharing, disable and re-enable the adapter.

  • Satellite S50T-B950 - touchpad does not work after update of Windows 10

    Hello "Toshiba."

    After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

    Please help me solve this company of Toshiba problem

    The same theme has been already discussed and resolved in this thread:
    https://Forum.Toshiba.EU/showthread.php?83885

    Then please follow the proceedings in the other thread to avoid misunderstandings

    by the way: here is the link to pilot site Toshiba win 10:
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  • 350 laptop G1: Touchpad does not work after open the cover.

    Whenever I close the lid, when I open again the touchpad does not work.

    I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

    I solved my problem!

    I have unistaled the driver PS/2 Synapatics 19.0.12.95

    Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

  • Z410 Touchpad does not work after upgrade to Windows 10

    Hello

    I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!

    • I updated the driver with no luck to make it work.
    • Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
    • In Device Manager it shows any missing material.
    • Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)

    Any tips?


  • Touch I D is does not work (but it worked until 3 days ago)... iOS 8 bug...? Solution available?

    Touch I D is does not work (but it worked until 3 days ago)... iOS 8 bug...? Solution available?

    Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (15 to 20 seconds).

    If this does not help, you may need to restore your iPhone.

    BTW, say you iOS 8, but your footer says iOS 9.3.1

  • Satellite C50D-A-12 x - touchpad does not work after Windows Update

    the touchpad does not work after the windows updare

    I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
    https://Forum.Toshiba.EU/showthread.php?82878

  • Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

    Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

    Hello

    Try the following.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

    Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

    When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

    Kind regards

    DP - K

  • After July 2014 update Vista, correcting spelling does not work on Windows Mail from 2006.

    Original title: Vista update of July 2014

    After July 2014 Vista Update orthographic corrector does not work on Windows Mail from 2006. Click on the "Edit" button to correct a GIS spelled the word, the screen goes gray and stop Mail.  Uninstall Vista Security Updates (5 discount) on July 8 and the Explorer 9 Cumulative security update solves the problem. (Prove with this reinstallation and uninstallation twice)  Have not yet had time to verify that updates 6 is the cause of the problem.

    Updated Vista regularly since it was first released.  First time I met this specific problem.

    Would be grateful for any comments or advice.

    I have this to happen on occasion and fix it tool.
     
     
    Try to compact and repair the database with this tool.
     
     
     
     
  • I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem

    I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem

    You have a version of Tally that had no support of the years. If you want to continue with the Tally, you will need to upgrade to the latest version...

    This seems to be the official site... http://www.tallysolutionss.com/

    It may be more friendly... http://tallyworld.com/

  • I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem

    I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem

    Hello

    Thanks for posting in the Microsoft community!
    I'm sorry to hear that tally 7.2 does not work with Windows 8. I hope that the steps helps you to solve the problem.
    Before troubleshooting, provide us with information.
    1. what happens when you try to use tally 7.2?
    2. you receive an error message?
    3 is the issue limited to match 7.2?

    You can check if the software is compatible with Windows 8.
    Make the programs more compatible with this version of Windows
    http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us
    If this is not the case, try to run the program in compatibility mode.
    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    Check the event viewer for error logs.

    a. move the mouse to the bottom left of the screen and right click to see a list of options

    b. Select Event Viewer

    c. click an event log in the left pane

    d. double-click an event to view the details of the event. Events are classified as error, warning, or information, depending on the severity of the event.

    Let us know if the suggestion provided was useful. If you have additional questions, we will be happy to help you.

Maybe you are looking for