HP Envy 700-311na upgrade to windows 7 missing drivers

Please help I just bought a 700-311 desire and put windows 7 on it as we just couldn't pass to 8.1

Now I have missing drivers and can not find them anywhere

I need

Ethernet controller driver

PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF3103C & REV_OC

Network contoller driver

PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086 & REV_9B

They are necessary for the Professional on Windows 7 64 bit operating system please

Hello:

For the first hardware ID, download and install the driver for the second on the list.

http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

For the second, download and install the driver for the second on the list.

https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24217

You will also need this bluetooth driver...

https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24189

Tags: HP Desktops

Similar Questions

  • HP Envy 700-327C: upgrade to windows 10

    Windows 7 Pro (64) was preinstalled on my HP Envy.  It is configured to automatically install the Windows updates.  I have the app get Windows 10 and the icon appeared in my system tray indicating that I had booked the upgrade of the W10, but then he suddenly disappeared.  When I choose the upgrade of Windows in the list of programs all he used to reassure me that the upgrade of the W10 has been used, but now it's over.  The history of the update indicates that the upgrade to Windows 10 failed.  CIP 1 service is installed, and as far as I know, all the other critical windows updates.

    How can I upgrade to Windows 10?

    Hello

    July 29, 2015 is history now, do you still need this icon? Please go to the following link:

    https://www.Microsoft.com/en-us/software-download/Windows10

    Kind regards.

  • upgrade to Windows 7 (missing drivers)

    Many people seem to be experiencing this problem.

    Bought a HP Pavilion 500-210qe for work and our software is not compatible with Windows 8.  Buy windows 7 and installed on the machine.  Now the driver ethernet and USB 3 drivers are missing.

    Anyone know where I can find the ethernet driver?  It is a Realtek PCIe GBE Family Controller.  Can't seem to locate it on their Web site.

    Thank you.

    Hello:

    This usb driver 3 should work...

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22824&lang=eng

    Ethernet: Try the second driver on the link below...

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • HP Envy 311na 700: HP Envy 700-311na - no monitor output work

    Hi, thanks for taking the time to read this.

    No.: G9B05EA #ABU

    Model n °: 700-311na

    My PC works absolutely fine for the last two months, until what I tried to put on yesterday.  My problem is that my screen displays "signal found" despite my branch above Tower.

    Start-up and testing:

    • When starting my PC I get the usual beeps and the Red led on it becomes as it normally would.
    • The wifi light is on as it should be, on the front of my Tower.
    • The usual flashing light also works as usual on the front of the tower.
    • The fans work properly when turned on.
    • My wireless keyboard and mouse are recognized as soon as a key is pressed or the mouse moves, like light blue on my connector USB lights up as it normally would.
    • The CD open/close readers as it should.

    What I've tried so far:

    • Turning off and on again (no luck).
    • Remove the power cord from the computer and hold the power button for 15 seconds before reconnecting and powered it back up (no luck).
    • Connect my turn to another monitor via HDMI (no signal found error also on this one).
    • With the help of my usual PC monitor for other things (my xbox entry was detected immediately on the monitor via HDMI).
    • By using all the methods of display output 3 available with my usual monitor (DVI, HDMI, DP), none of them worked and all would result in no error signal on the screen.
    • Withdrawal/meeting the cables of the screen.  This does not give rise to my monitor to turn on as if is acknowledged the connection has been established to an output device, but once the display lights I get the usual error message ("this is the case with two DVI and DP connections, HDMI does not give me a lot of joy, but maybe it's because she's going through a ' 1 autodetect in 3 out" HDMI splitter.)  The separator acknowledges, that the HDMI is connected, but I get the normal red light that appears when a Powered HDMI is bound upward).

    What I did:

    • Touched the BIOS.
    • Damaged the machine.
    • Disassembled the machine somehow.

    I'm full of ideas on what else to try.  I had the PC for more than a year and has a problem similar to that in the first months of her own, I think it's something to do with the power supply cable (a friend looked for me), but he managed to make it work back again.  Unfortunately I am no longer able to contact my friend on this problem, so I am completely in the dark.  Help would be very appreciated (please avoid some specialized terms as I am a little one recruit across a company PC fixing).

    Thanks in advance.

    Hello

    Thank you for your response.  Fortunately, I can offer you a solution to my own question!  In my view, a windows update 10 can occur during the last stopped that I made.  The update I think doing something to the BIOS that was the issue.

    I did the following steps and managed to get the display to start working again:

    1. Turn on the computer and press the F10 key for eight seconds.

  • HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

    Hello.

    I hope there, can someone help me!

    I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

    I use Protection Premium Bullguard and Acronis True Image installed.

    I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

    When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

    Hope you can help. (fingers crossed!)

    Chris

    The Setup error log file shows:

    2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
    2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
    2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

    2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

    2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

    2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

    2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

    2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

    2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

    2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

    2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

    2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

    2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
    2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
    2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
    2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
    2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
    2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
    2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
    2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
    2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
    2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
    2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
    2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
    2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
    2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
    2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
    2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
    2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
    2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
    2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
    2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
    2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

    I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

    Hooray

  • HP Envy 5530: Since upgrading to windows 10, my laptop cannot see my HP Envy 5530 iwireless printer

    I have upgraded to Windows 10, since then my pc can't find my HP Envy 5530 wireless printer. I downloaded some sort of doctor scanning HP according to a previous post on this forum, but it does not work and my pc cannot see my printer yet. Please can someone help? My laptop is a Levono Idepad.

    Hey @Rayprinterman,

    I see that you have some problems with printing to your craving 5530 e - all - in - one printer after upgrade to Windows 10. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Turn the printer off.
    2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
    3. When the lights come back on the router, turn on the printer.
    4. Close any programs you have open on your PC.
    5. In your search type in printers bar and open devices and printers.
    6. Right-click on any icon of your printer listed.
    7. Click on remove the instrument.
    8. Repeat for all other icons of your printer listed.
    9. Click Add printer, and follow the prompts to add a new queue for your printer.

    Please let me know the results after following the above. If this allows you to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

    Hello

    I'm of the Germany, but I'll do my best to write this in English.

    The product name and number: HP Envy 17 3010eg {information}

    Operating system: Windows 8 Pro 64-bit

    Drivers: everything up to date

     

    Long story short,

    I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

    So I waited until the driver for Windows 8 support has been completed by HP.

    This month, I noticed that HP has released a graphic driver for Windows 8.

    Happy as I was I installed Windows 8 immediately via upgrade function.

    I installed all the missing drivers.

    * Update Bios to F.08*

    I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

    BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

    Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

    The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

    So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

    I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

    Nice, but I have no idea how to turn it on again.

    So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

    So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

    * Tested in Bios Version F.09*

    Yesterday, I noticed another Bios Update. This time in version F.09.

    So, I updated the Bios with Windows 7 installed.

    Everything went well (I thought!).

    Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

    BUT without success...

    So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

    * Problems with Bios Version F.09*

    BUT then, I noticed a strange behaviour of my laptop:

    -proximity sensor no longer works

    -the keyboard backlight cannot be (DIS-) activated

    -the brightness of the backlight is half as usual

    -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

    * Version of the Bios downgraded to F.05*

    So, I spent to the version of the Bios to the older Version available: F05

    And I was a little shocked by the result.

    Windows 8 acknowledged the Intel HD 3000 graphics card again!

    The problem is the Bios!

    Then, I upgraded the version of Bios version to see which version of the cause of the problem:

    Œuvres F05

    Œuvres F.06

    F.08 does not work

    F.09 does not work

     

    So I decided to stay with the version F.06

    BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

    I installed the driver anyway...

    I found myself with a black screen... I had to reinstall Windows completely.

    Yet more long story short,

    I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

    I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

    So for the moment I am absolutely no idea what the problem might be.

    The support has not yet heard of these problems and I have not found any website which explains the same problem.

    Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

    Someone else got the same problems?

    What do you think? Is it really a problem with the Bios?

    What can I do to solve the problem?

    for me the best driver are:

    http://leshcatlabs.NET/

    Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.

  • HP ENVY 700-349 Desktop PC: Windows 10 activation issues

    So, I have recently reinstalled windows 10 on my computer (from Windows 10 Windows 10 once again) and I wiped my HARD drive, so it can reformat properly for the installation of windows. After installation I then needed to reactivate my windows and putting in my product key after searching physically inside and everywhere in my computer I can't find any key to activate my windows licenses. (When I bought my computer there was windows 8 and then I upgraded to windows 10 free no problem) I'm currently sucks, thank you.

    Already activated my windows by contacting support, gave them my details and every thing is correct. For others who have this problem just pass the link https://partner.support.services.microsoft.com/en-gb/co... and select chat, tell him your story and it should be good!

  • HP Envy 700-249: upgrade graphics from GT635 to GTX960... I was wondering if computer supports

    Hello

    I am looking to update my graphics card between a GeForce GT 635 a 960 GeForce GTX amp.

    I was wondering if my computer would be able to support it, and if the card would fit well inside?

    My computer specs:

    HP Envy 700-249

    Intel Core i7-4770

    CPU @ 3.40 GHz

    12 GB of Ram

    Power: 460 W

    Thank you

    Mitchell

    Greetings,

    Your PC BIOS will support the map.

    You need a 6 connection pins on the map.

    The card is a double slot and 9.5 inches in length. Check your turn measures and make sure that you can install a card double slot.

    The food is fine, as long as you have a connection to pine trees six or eight available.

    NVIDIA provides an adapter.

    Disable secure boot. Enable legacy start.

    See you soon!

  • HP Envy 700-060ea: upgrade to a 770 MSI GTX

    Recently, I improved my diet for a corsair CX750M, now I want to install a MSI GTX GPU 770 from 760 GTX preinstalled OEM, but searching through the forum, I see that there are problems with the bios when installing a new GPU, but this issue seems to affect version 7 BIOS, I have the version of the bios on a motherboard ms-7826 80.15 does that mean I can install the MSI GTX 770 and my HP Envy 700 - 060ea PC will start and work properly, all responses will be greatly appreciated.

    Hello

    HP OEM graphics cards are manufactured according to the specifications of HP and are certified to work in the particular model PC.

  • Want to 700-410 W/Beats Audio: HP Envy 700-410 i5 W/Beats Audio, need drivers for Win 7 NO HP SUPPORT

    So just a week after the arrival of my new desktop PC (earlier this year), I had a massive failure of hardrive. I have access in a similar to several corporations hardware industry and had several including a beautiful 248 G SSD kingston hardrives onsite. Having said that I do not think there sucj a problem just install the new SSD in read to send the unit back to HP for repair. I needed this system running and had no time to wait than the lead time of him having returned repaired, about 7-10 days. Yes, it was a huge mistake that has made this system essentially unusable. I did not like the unit running windows 8.1 because it was not a touch screen. I got a new Windows 7 Pro, which I installed it and he posted fine and oots upwards in seconds. No audio beats, but it's not really my thing, no biggie. I can not find information on obtaining network, adapters, Lan, Wan drivers and basically can not access my services Adobe CC, which is my main fucntion. I have since bought a Dell and never have a problem with sys op separate etc.. I return to the problem of tis after several monts and decided I will ive it oe more attempt and them I think Im going to test the aerodynamic viability of this office. I am sure that it will fly ut Im not confident on its ability to land without damage! Please help if you can.

    Hello:

    See if the W7 x 64 drivers of this model works on your.  It has the same motherboard.

    http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529898

    Do not use the BIOS or the files of the firmware of this model on your.

  • Yoga 2 upgrade to Windows 10 - missing icon

    I have Lenovo Yoga 2 computer 13 "laptop under Win 8.1

    I got a Win 10 (book your 10 Win) icon and... He has gone 4 days ago. I tried all possible scripts and online tips, here's what I did:

    All the tricks of

    http://www.askvg.com/fix-get-Windows-10-upgrade-app-icon-is-missing-in-taskbar/

    Nothing

    I read somewhere that maybe it's because I had win 8 and updated upgraded to 8.1

    I did not need to book, want to be sure that I will update when Ms. releases... Any thoughts?

    Any ideas?

    OK, just fixed it by using this link and download a cab file

    http://forums.windowscentral.com/Windows-10-General-discussion/359382-Windows-10-reservation-update-...

    Really on the phone that I got something I wish more of: reset to the factory settings... Suffice it to say... I was shocked when a mechanic said that he had never seen a problem with this... Well...

    Thank you!

  • After the upgrade to Windows 8, Miss me my games like Spider Solitaire

    I have upgraded to windows 8 - during the upgrade, I lost all my games like Spider Solitaire and others who came with Windows7-how come back Spider Solitaire?

    You can download the Windows 7 games from the site below. This article is FRO 10 Windows but these games work in Windows 8.0/8.1.  http://winaero.com/blog/get-Windows-7-games-for-Windows-10/

    Warning: As with most of the third of download sites there is a lot of potential 'trash' to be downloaded if not careful, then read each screen before clicking.

    Hope this helps and if you need any additional aid station and we will be happy to help you.

    "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

    If this has answered your message please mark as answer

  • After the upgrade to windows 10 missing MSCVP110.dll

    Hello

    After the upgrade to windows start 10 lack MSCVP110.dll and no app.

    I have uninstall and install redist visual x 86 and x 64, but it's the same thing.

    Help!

    Hi ambredoreau,

    There is a specific problem of windows OS, I will recommend you to contact windows support team.

    But I found a useful link, please relate to her Halo Spartan Strike - MSCVP110.dll - Microsoft community.

    Check out this link Windows 10 and Adobe Creative Cloud for application compatibility.

    Kind regards

    Nicos

  • Spectrum 13D-3000 Downgrade to Windows 7 - missing drivers

    I shot my 13D-3000 Windows 8 for Windows 7 via an image to a bootable USB drive.  However, when Windows 7 installed many drivers were not installed, including the NETWORK adapter and the USB drivers.  Therefore, I can't access the internet or missing drivers via the USB port.

    Can anyone offer any suggestions how to get Windows 7 running?

    (1) driver and Intel Chipset Installation Utility

    (2) Intel® USB 3.0 xHCI for Chipset Intel® 8 series/C220 = PCI VEN_8086 & DEV_9C31 & SUBSYS_1911103C & REV_04

    (3) drivers and Intel® PROSet/Wireless Software = PCI VEN_8086 & DEV_08B1 & SUBSYS_C0708086 & REV_6B

    (4) Intel Management Engine Interface Driver (MEI)

    (5) pilot Intel Rapid Storage Technology

    (6) pilot Intel in fast ignition

    (7) high definition (HD) of Intel Graphics Driver

    (8) IDT high definition (HD) Audio driver

    (9) Synaptics TouchPad Driver

    (10) Technology Intel Smart Connect = ACPI\INT33A0 (engine CAPACITY 4.5 before installing MICROSOFT.NET)

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

Maybe you are looking for

  • Address bar is no longer enabled when opening blank tab

    Since today, when I open a new tab (be it with ctrl + T or by clicking on the Green over a symbol), the address bar is no longer enabled, which means that I have to click it before you start typing. When I have about: newtab (the one with the tiles a

  • How do recover you deleted downloads?

    I accidentally erased my downloads in the downloads page. Is there a way you can get them back? If so, how?

  • release of TSobj objects

    Hello I have found some answers to previous questions on these issues, but still need help. So, after using TS_Obj_SeqFile SequenceFileHandle, I try to go out with (first record of file): tsErrChkMsgPopup( TS_SeqFileSave ( SequenceFileHandle, &errorI

  • Device Cam

    Hi I have one of Model_ usb2.0 cam webCam Pro and does not recognize the ultimate in July 64 operating system window... I just gave the controller dc me image mirco, but apparently not detect any missing pilot... to solve this problem? I tried decarg

  • HP ENVYm6 Notebook PC m6-n010dx - tips for docking station

    I just got this laptop at Best Buy. I want to connect to a docking station for reasons of mobility at work. Can anyone recommend a dock? I want to 1. plug a bigger monitor 2 connect a keyboard 3. use several USB ports 4. to be able to load the comput