HP Envy 700-330qe

A new employee set up the computer and did not write the password used when connecting. I can't get into the system to reset the user account information. What should I do?

Hi Mike,.

Please refer to this article on a Windows password reset.

Jaco

I'm not an employee of ch *.

"" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

HP products:
810-150se office
17 t - j000 Notebook
H8 1380t CTO Desktop
560z Desktop

Tags: HP Desktops

Similar Questions

  • HP ENVY 700-330qe CTO desktop: HP has encountered an error when trying to analyze your product

    When I connect to HP support, correctly identifies my PC (HP Envy 700-330qe CTO Desktop), but trying to find the recommendations of the exceptional software, I get a message "HP has encountered an error when trying to analyze your product".

    It was working before and I used it to identify and install a number of revisions of software in circulation.

    Subsequently, he developed the above error. Is this just an artifact because I have all of the pending software elements recommended to install?

    Hi there @Scotsman101,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with a sweep to get recommendations for the software HP Support site. I'm happy to help you with this.

    It is possible that it was a small problem because there are updates on the forums and other parts of the website last week. It still happens?

    An alternative to this method is the HP Support Assistant, which includes several other tools. Please see the following pages where you can find the software and instructions on how to use it.

    HP Support Assistant
    HP computers - using HP Support Assistant (Windows 10, 8, 7)
    HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

    Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • Intel Rapid Storage Technology and envy 700-330qe

    I'm a new 700-330qe CTO. Include updates of driver on the hp support is for technology Intel Rapid Storage Technology. I first thought it was a driver of hardware like my former lodge (he had a card Intel Matrix Storage Manager who managed the RAID 0, 1 or 0 + 1).  Now I see that it is a software emulation of RAID. Nowhere in the documentation supplied with the machine is there any mention of the capacity of this machine to run any form of RAID. I have two HARD drives, and they are the same size, so, theoretically, that I could run RAID 0 or 1, if I so wish, but is nowhere mention of a way to do it. I see the BIOS must be configured to run RAID.

    I'm NO expert. I was wondering where I can find more on how to set up a RAID machine. So far, I still didn't look in the BIOS (not even sure how to do this, while some of you think I'm stupid). I guess I get a little twisted shape when a product has features that should be out in the open but seem to be hidden. Any help would be appreciated to reallyhl.

    Hello

    You can use the TSRI for caching, but you must first disable ExpressCache to run.  If you buy a longer MSATA card of 64 GB (128 GB) then the remaining space can serve as a data storage area.

  • 700 - 300qe envy: downgraded to Win7 on Envy 700 - 330qe, need drivers

    Hi all

    I tried of Win8 used to, but he wasn't going to happen so I cleaned the disk and installed Win7. Now miss me some drivers and I hope someone here can help you. I've scoured the web for them and managed to get a little supported, but there are 3 left.

    Network controller
    PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01

    SM Bus controller
    PCI\VEN_8086 & DEV_8C22 & SUBSYS_2AF3103C & REV_05

    USB
    PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C & REV_05

    Any help would be great appreciated!

    Art, welcome to the forum.

    Here is the page of software & drivers for the 810-135qe Phoenix envy.  The exact mother that your computer it came with Win 7 64 bit installed.  I think that the drivers should work for you.  The SMBus Controller is included in the Chipset driver.

    Please let me know if they work for you.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • 700 - 330qe envy: activate the second ports USB 3.0 on motherboard Kaili

    I'm a 700-330qe and notice TWO USB 3.0 plugs blue on the motherboard of Kaili, but only one is in use that supports two ports USB 3.0 on the top of the computer case.

    Is it possible to activate the second USB 3.0 on the motherboard and add another cable longer 2 USB 3.0 ports on this computer?

    Thanks for any help,

    Chas Pearson

    Your request does not bother me, and I hope everyone.  DUH isn't stupid, I know where he is.

  • HP 700-330qe: how to disable or replace the SSD on HP 700-330qe

    Help for my HP 5 months! It kills Me!

    I bought a HP 700-330qe in 2014 from Amazon and just started getting SMART of Windows hard disk errors whenever my computer restarts, telling me that the hard drive failure is imminent. He also tells me to shut down the computer immediately, save it, contact the manufacturer, etc. Never seen it in any PC I owned before. Naturally, I freaked out and did some internet research, discover that it is relatively easy to clone and replace a hard drive. I ordered a new hard drive Western Digital 3 TB of Amazon, a docking station for disc brand cable hard of Amazonia and downloaded the Macrium Reflect free disk management software.

    Items from Amazon arrived in a few days and I got to work making a clone of my one and only hard drive. Clone was made with little problem. Shut down the computer, it opens and replaced the old hard disk with a new one. Start the computer to the top and got the same message on imminent hard drive failure! So I paid more attention to it this time and looked up the model number in the warning message, which was: ScanDisk SDSA6DM - 016 G-1006. I Googled that and found it was the disk solid state drive (SSD) used as a cache to speed up certain operations. Arrgh.

    I stuck my old hard drive in the hard drive docking station and was ready to be cloned partition SSD and all partitions on the hard drive to the hard drive and the removal or at least unplug the SSD drive to get rid of this problem. The software told me that the SSD is shaped as MPR (or something like that) while the main hard drive is formatted as GPT, which are different types of hard drive, formatting, so you cannot copy these different types of partitions on a hard drive.

    So here's my options as I see them:

    (1) I have to either disable the SSD, but I don't know how and I don't know if the computer will always start the same. Windows is partially installed on SSD? I do not know.

    (2) to clone and replace the DSS about the same way I did with the main hard drive. I can get the SSD according to Amazon for $49: Kingston Digital 60 GB SSDNow V300 SATA 3 2.5 (height of 7mm) with adapter Solid State Drive SV300S37A / 60G.

    For the option #2 above, the only problem is that I have no idea where the OEM SSD of ScanDisk is currently installed in my computer! It is in the hard drive cage? I don't see anything else installed there. I thought it was in the cage directly above the hard drive cage, but I think that what I was looking at was the front memory card reader/USB ports. I don't have on CD Player installed and I can see where it is. Help!

    PS: I also downloaded EaseUS Partition Master 10.2 and it allows to analyze the SSD drive. While it was scanning it found 9 bad blocks (on tens of thousands of blocks), but when he finished the analysis it says there is a lot of blocks. For this to happen on an SSD, which is supposed to be more reliable than hard disks of small, to make this so much more aggravating situation. At least, I upgraded my hard drive 2 TB to 3 TB and know now that I can do. Sigh.

    Yes, I had a frusrtrating very experience with HP customer support, even after it was raised to a case manager based in the United States, who called me home. She found no part at all in its computer system and wanted to send me in my whole PC to a service center customer (it was still under warranty) which would take at least 3 weeks. I said no and went forward and the DSS out of my computer. I stopped receiveing the error messages and did not notice a slow down in performance, but went ahead and bought and installed this one, just in case it actually provides an advantage: My Digital 32 GB SSD Bullet Proof (on Amazon for $25).

    As a note to end funny to this drama, about 6 months after my discussion with HP support I describe above, I have randomly mailed an envelope of HP with the exact 16 GB SSD, they said that they didn't in their system. It also included an envelope to return my faulty SSD and a stern note saying if they do not receive the defective item within 3 days my credit card (that I never gave them) would be charged. I threw a long time ago the defective item and just throw it back into a drawer... or maybe that I returned it in the envelope for return of defective product? I don't remember really.

    In any case, it was a horrible customer service experience, and since then I have another HP Envy (my PC 3 year to my son) have a hard drive and video card fail at the same time. I replaced the two after a few problems, but no matter what I do, it can get its setup dual monitor want to work more. I tried several video cards and nothing.

    All of these factors combined caused me write off HP for the future PC purchases. The guys in my company IT say it's the reason why we only buy Dell computers at work (we have hundreds of maintain). They do not use strange pieces like these small SSD cache records, and their parts are standard and easy to replace because of the case. I'll either get a Dell or ASUS as my next PC.

  • HP Envy 700 406 PC: windows 7 drivers for hp envy 700 x 64

    I bought a PC HP Envy 700 406 which had originally windows 8.1 on it, but due to problems of compatibility to work, I had this downgrade to Windows 7 Ultimate 64-bit.  Now I have to get all the drivers to make these computers run smoothly again, but the Internet HP site has only the drivers listed for Windows 8.1 for this PC.  Can someone tell me where to find the drivers I need?

    Hello

    AMD SMBUS driver

    http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65990.exe

    Driver USB 3.0 AMD

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69719.exe

    CODEC Audio of IDT high definition (HD)

    http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67081.exe

    Alcor Micro USB driver card reader

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69823.exe

    AMD graphics driver

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69692.exe

    RF remote control for viewing slide show and eject pilot

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66396.exe

    Controller Realtek network driver

    http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67085.exe

    Driver LAN wireless Broadcom

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69679.exe

    Driver Bluetooth Broadcom 2070/20702

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69680.exe

  • HP Envy 700: Cannot find wifi password

    Hello

    I have two questions:

    1: I have an HP Envy 700 office and I am connected to the internet via an ethernet cable.  It seems that my computer has built in because it gives me a wifi network name, but when I try to open it, I need a password and I never remember having a password! I made Diagnostics and tried to find the password on my PC but not luck. Any ideas on how to get my password or reset it?

    2: is it possible to have two wifi and always use a cable ethernet on my PC? I would use the WiFi from my PC with new smart tv that I just bought, so I can broadcast shows.

    Thanks for any help!

    Hello

    1. you need to connect to your wireless router to know what is the password, OR you can reset your router and start over again.

    Router must have a tiny hole and you can use a paper clip to reset. Plase to consult its manual.

    2. Yes, you can use BOTH at the same time.

    Kind regards.

  • HP Envy 700-249: upgrade graphics from GT635 to GTX960... I was wondering if computer supports

    Hello

    I am looking to update my graphics card between a GeForce GT 635 a 960 GeForce GTX amp.

    I was wondering if my computer would be able to support it, and if the card would fit well inside?

    My computer specs:

    HP Envy 700-249

    Intel Core i7-4770

    CPU @ 3.40 GHz

    12 GB of Ram

    Power: 460 W

    Thank you

    Mitchell

    Greetings,

    Your PC BIOS will support the map.

    You need a 6 connection pins on the map.

    The card is a double slot and 9.5 inches in length. Check your turn measures and make sure that you can install a card double slot.

    The food is fine, as long as you have a connection to pine trees six or eight available.

    NVIDIA provides an adapter.

    Disable secure boot. Enable legacy start.

    See you soon!

  • Desktop HP ENVY 700: problems with the boot from usb in the bios

    Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

    I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

    I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

    I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

    Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

    I need this to work because I can't afford to buy new systems and its for my studies so its imperative

    Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

    You can check the type of hard disk online order volume by using the DiskPart utility.

    Create a flashdrive bootable UEFI with RUFUS.

    https://Rufus.AKEO.IE/

    Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

  • HP envy 700-414: HP Envy 700-414 Windows 7 driver network controller says I don't meet the minimum requirements

    I recently installed Windows 7 on my hp envy 700-414 and missing a lot of pilots. A user by the name of banhiem gave me a link to download the drivers of a 700-230 hp envy. After I did it, I clicked on another link, it gave me to install the Realtek network controller. Whenever I tried to install the driver, it would tell me that I did not meet the requirements. Other drivers work fine now, except the network controller. The steps on how to fix this error would be greatly appreciated.

    Hello:

    See if this card wireless driver works...

    The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated in the supported models that run an operating system supported.

    FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70888.exe

  • HP ENVY 700-029eb desktop PC. Update to Windows not sure 8.1?

    Hello world

    HP ENVY 700-029eb-computer for office
    Model: E3H39EA

    Windows 8

    A question related to the following message on my HP computer:
    -----------------------------
    HP has not tested this PC with Windows 8.1
    For this reason, HP is unable to update providence instructions or Windows 8.1 drivers.
    You can now lose stability and basic functionality if you try to update your system.
    -----------------------------

    A Windows 8.1 update could make the System unstable, so the message of HP.

    But my computer is always busy preparing the update and guard asks me to do the 8.1 update.

    So can I install Windows 8.1 safely on this computer? Or how to turn off the update?

    We appreciate your comments and advice.

    GuyterB1964, welcome to the forum.

    I do not understand these messages.  Here is the download page for software and driver for the computer.  As you can see, all the drivers for win 8.1 are listed.  They would not list them as much as they have not been tested.  I see no reason not to do the update.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • HP Envy 700-470na: 600W PSU and GTX 970 for HP ENVY 700-470NA

    Hello

    I am looking to buy the GTX to my HP Envy 700-470NA 970. I also need a 600w PSU to use my current power supply (500w) would be risky.

    My question is, I'll be able to replace the power supply on my desktop with the 600w Corsair? Well, just reliable and good quality PSU with 600W which can be compatible with my PC would be great.

    Please provide a link to the PSU if possible. Thank you!

    You are welcome.  Thank you for the additional information.

    Yes, the cables should function properly.  Cards mothers HP have the ATX 24 power connector standard pins.  You could buy a modular power supply.  In this way, that you don't have to use all the cables that are not necessary.  This makes more space for good air circulation.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

    Can someone tell me how to install the graphics card EVGA 650 TI boost in the

    HP ENVY 700-210xt

    Product number: E9G99AV

    I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

    Hello:

    Please see my response to your other post on the link below.

    http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

  • Update graphics card on HP Envy 700

    I recently bought a HP Envy 700 computer, try to use it as our central entertainment PC, only to find out that the HDMI output spit only 2.0 sounds while I need a 5.1 surround sound.

    Did some research and found that the video cards only newer and more fanciful have this function.   Bought a Radeon R7 260 X Video Card plugged in, but the motherboard would not recoganize it.

    Then I realized that it is possible that the motherboard (IPM87-MP by Pegatron) is not compatible with the video card, or maybe because the 450W power supply is not enough.

    I would be highly appreciated if the PC experts could advise on how I can make it work.

    Thank you!

    Hello:

    On the PCs come with Windows 8, you will need to change 2 BIOS settings in order to use a video card no HP in your machine.

    Please see the info on the link below and I hope that's it, that is.

    http://support.HP.com/us-en/document/c03653200

Maybe you are looking for