HP ENVY - 700-410 desktop: blocking after a minute of play.

Similar Questions

• Want to 700-410 W/Beats Audio: HP Envy 700-410 i5 W/Beats Audio, need drivers for Win 7 NO HP SUPPORT

  So just a week after the arrival of my new desktop PC (earlier this year), I had a massive failure of hardrive. I have access in a similar to several corporations hardware industry and had several including a beautiful 248 G SSD kingston hardrives onsite. Having said that I do not think there sucj a problem just install the new SSD in read to send the unit back to HP for repair. I needed this system running and had no time to wait than the lead time of him having returned repaired, about 7-10 days. Yes, it was a huge mistake that has made this system essentially unusable. I did not like the unit running windows 8.1 because it was not a touch screen. I got a new Windows 7 Pro, which I installed it and he posted fine and oots upwards in seconds. No audio beats, but it's not really my thing, no biggie. I can not find information on obtaining network, adapters, Lan, Wan drivers and basically can not access my services Adobe CC, which is my main fucntion. I have since bought a Dell and never have a problem with sys op separate etc.. I return to the problem of tis after several monts and decided I will ive it oe more attempt and them I think Im going to test the aerodynamic viability of this office. I am sure that it will fly ut Im not confident on its ability to land without damage! Please help if you can.

  Hello:

  See if the W7 x 64 drivers of this model works on your.  It has the same motherboard.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529898

  Do not use the BIOS or the files of the firmware of this model on your.

• HP ENVY 700-000z Desktop PC with 8 and the need to know if I can install Windows 7

  Just bought HP ENVY 700-000z Desktop PC equipped with 8 and need to know if I can install Windows 7 on this computer without problem.  My work does not allow the use of Windows 8.  If I can install Windows 7, what version of operating system do I need to buy to do a clean install.

  If I understand correctly, I could order the Windows 8 Pro, who has right to demotion and then install Windows

  7 pro, I have then I should be able to get the drivers, I need HP is correct.

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You should ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;

  

  or

  

  In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.

  Most of the Windows 7 drivers from the drivers of HP Pavilion p7-1299 c desktop PC page should work on your desktop HP ENVY 700 - 000z CTO. Both models use a variant of the motherboard HP Jasmine. If you have missing or unknown devices after installing the drivers, please post the "Hardware ID" Device Manager for devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP ENVY 700-029eb desktop PC. Update to Windows not sure 8.1?

  Hello world

  HP ENVY 700-029eb-computer for office
  Model: E3H39EA

  Windows 8

  A question related to the following message on my HP computer:
  -----------------------------
  HP has not tested this PC with Windows 8.1
  For this reason, HP is unable to update providence instructions or Windows 8.1 drivers.
  You can now lose stability and basic functionality if you try to update your system.
  -----------------------------

  A Windows 8.1 update could make the System unstable, so the message of HP.

  But my computer is always busy preparing the update and guard asks me to do the 8.1 update.

  So can I install Windows 8.1 safely on this computer? Or how to turn off the update?

  We appreciate your comments and advice.

  GuyterB1964, welcome to the forum.

  I do not understand these messages.  Here is the download page for software and driver for the computer.  As you can see, all the drivers for win 8.1 are listed.  They would not list them as much as they have not been tested.  I see no reason not to do the update.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• HP Envy 700 - xt desktop: How can I stop recovery of training hard and switch to disk system?

  Called Costco to get assistance from the technology with a desktop computer HP Envy. The tech asked me to do a system of hard drive recovery, even if I got recovery discs...

  The computer screen showed 100% software installation of recovery in less than two hours and the machine came into fashion "deactivate the tower."

  Problem: 'Disable lap' mode is still ongoing, and now it has been a full 6 hours and then some.

  Question #1: Can the office be manually stop to stop the process without end 'disable on tour' without harming the computer?

  Question #2: Guidance concerning such a judgment and then redo the system recovery once more, but this time with the recovery discs?

  Theoretically, the hard drive by using Recovery Manager F11 recovery should produce the same results as the set of recovery disks.  The set of recovery disks will probably replace all and then give the factory settings.  The result should be the same, however, I don't see no harm to do so.  What did you do to try to get out if "turn on, turn off"?

  On the thing to try before using the drive set - unplug the PC from the wall.  Press the power button, that would be turning on the PC if connected.  Hold button power in 30 seconds to a minute.  And then reconnect the power cord to back in and try to feed normally upward.

• HP ENVY 700-349 Desktop PC: Windows 10 activation issues

  So, I have recently reinstalled windows 10 on my computer (from Windows 10 Windows 10 once again) and I wiped my HARD drive, so it can reformat properly for the installation of windows. After installation I then needed to reactivate my windows and putting in my product key after searching physically inside and everywhere in my computer I can't find any key to activate my windows licenses. (When I bought my computer there was windows 8 and then I upgraded to windows 10 free no problem) I'm currently sucks, thank you.

  Already activated my windows by contacting support, gave them my details and every thing is correct. For others who have this problem just pass the link https://partner.support.services.microsoft.com/en-gb/co... and select chat, tell him your story and it should be good!

• HP ENVY 700-349 Desktop PC: can I put this desktop computer graphics card at a 960 GTX?

  I decide to upgrade my videocard to a GTX 960 a GTX 645. My question is if I can spend in the first place (I'm not the most ideal for this kind of situations). The exact specifications of my computer is listed here: http://support.hp.com/us-en/document/c04337197 . The exact information of my video card is shown here: http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-960/specifications .

  Please help I'm dying for a response

  Greetings,

  Seems good.

  960 is 9.5 inches in length and requires a power of 400 W.

  Check the clearance in the tower. Measure along the 645 to verify that you can adapt a 9.5 inch to 10-inch card in the case.

  Hard drive cage can be in the way.

  Check that your has a PCIe auxiliary cable as the 960 supply requires six extra pins to connect. The manufacturer will usually provide an adapter if you need. Or you can get one online.

  See you soon!

• HP ENVY 700-074 Desktop PC: Graphics driver is not up to date

  Hello, I was trying to update my driver of Intel 4600 Graphics for many months now desperately and it did not work. There is currently a problem with my graphics driver (it does not play in one of my pc games, they the accident that I start up) and I was recommended by various people to update my graphics driver. I tried using the Intel Web site to update my driver, but since it has been changed by the manufacturer would not. HP support for my computer for the driver downloads and software did not work, either I get erroer - 259, as the version he tries to download and install a version lower than what I currently have installed (Version 10.18.10.3621). I don't know what to do when I searched hard for a higher version than what I have installed.

  Hello:

  See if David at the link below works for you too...

  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/HP-envy-vdeo-drivers-are-way-out-of-date-and-HP-won-t/m-p/5663186#M133496

• HP ENVY 700-210 Desktop PC: Windows 10 improved rear output loss taken audio input on desktop HP Envy

  Beats and all software audio apps work fine after 10 window installed. but I lost out in all but one of my audio jacks back during playback using any audio application (Media Player, Cakewalk, etc.).  I went to manage audio devices on the control panel and to configure/test the speakers/headphones and I went out on the set of the back to my speakers during the test; but, not for playback of audio applications.

  I found a solution.  After the announcement of this question, I went through the different options for audio and put to update my sound driver.  Since I got a response from the Microsoft Community ( http://answers.microsoft.com ) forum which confirms this.

  > Go to Device Manager (press Windows + X, select Device Manager button.

  > Locate the audio adapter.  In my case, I had two entries for audio devices, "Audio inputs and outputs" and "audio, video, and game controllers.

  > I updated the driver for "IDT High Definition Audio CODEC" under "audio, video and game controllers".   It worked.

  > I had to reboot twice before it takes effect.

  > It seems that it is the same driver for 'Speakers/headphones' under ' Audio inputs and outputs.

  > Update drivers is reversible using the button "revert to the version.

• HP Envy 700-230qe desktop PC

  I bought the computer of the object at the end of December and received my PC shipped in just one week from when he was ordered to hp.com.  Good.  Bravo for delivery before the date of your promise!

  I had problems when I turned it on. Then on the phone for 2 hours with a tech and slept inside the case, we determined that the cables have reached the fan on the video card, causing bad noise, I had to start.  So far so good.

  Motherboard failed after the installation and activation of the software.  Tech was helpful, but he had me open the case and spend a few hours of trouble shooting, pulling RAM, HDD cables, resettlement, etc..  Specific motherboard failed and warranty issues began.  Stuff with new material of this complexity can occur.  I understand. Congratulations to your tech team to work with me and help me help them.  It's good to get the issues resolved quickly.

  They told me it would take 2 weeks to fix computer (including shipping costs).  Because I needed a computer earlier, I determined that it would be easier to computer same reorganization and RME' former g.  So far so good.

  What nobody told me - it will take 23 Jan (20 days) for HP rebuild then 2 days more delivery - to get it to me. It is roughly 15 days longer than the first time to build for the new client!  The best approach from their point of view has been completely buy a new one, and then have it refunded once you receive.  NO GO you already have nearly 1300 dollars of my mony - then it would still not built until January 16 (11 days)!

  You all need to get your act together.  This is my 8th HP computer. My whole family uses. Generally, we were happy with the the customer service and the quality of HP products.  But I'm getting a bitter taste on HP now after that!  I would like someone of senior management at HP inform on this type of treatment (without fault the tech guy and the sales representatives who do their job) by the company of your guests.  You sent me a defective product. You should do it right as quickly as possible.  Keeps me a loyal customer.

  I work in a place of high use computer.  I'm having a hard time to recommend HP to the people who buy after the experience of this kind - unless you can get your act together.  I have dealt with other companies in the past. I am happy, they went out of business - as their technical support and customer service was bad and they used bad quality products.

  The customer service is very important to you. Please let me know how I can speak with someone at HP management on this issue.  This isn't the type of treatment that will get the business for you.

  Thank you

  Is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  I am sorry to hear about your experience and have forwarded your concerns to administrators of the Forum HP for possible escalation. Please look for a PM (private message) on this forum.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP ENVY 700-305no desktop PC: Bios update failure.

  Long story short (a little).

  I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

  virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

  This leads me to believe that he himself got into the Bios of my computer.

  so I downloaded the latest bios for my system, in this case

  Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

  through the Setup program on another computer, I installed the update to the bios of my USB,

  inserted in my main pc, held down the Windows and key B, while starting my computer.

  This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

  I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

  say that the downloaded bios is not compatible.

  What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

  I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.

• HP ENVY 700-230ea desktop: looking for advice to update for my HP ENVY 700-230ea desktop computer

  Hi all

  looking for advice to update for my 2 year old want 700-230ea descktop

  thought in the following way

  Replace the boot wth drive a fast SSD

  Doubling of the Ram of 16 MB to 32 MB

  Add a better graphics card.

  Just struggling to find compatibel points, so everyone has any idea, what type of memory should I watch so that its compatibility with the existing 2, 8 meg sticks

  SSDS seem to be a source of confusion that mine field that I should look for use as boot drive.

  Graphics card will be limited to what the power supply can turn off, someone knows what it supports current graphics cards go.

  Thanks for any help on this.

  @Paul80, welcome to the forum.

  Here's memory and SSD who are recommended by Crucial memory.  They make great products for OEM computers.  You have to open the case and check of installed memory brand.  Then contact the Crucial Tech Support to see if their memory will be compatible.  The main problem with the addition of memory, it's buy the memory that is compatible with existing modules.

  The best way to install the SSD, it's letting the existing connected HARD disk as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the cloning software that you will use on the HARD drive.  Open and select the SSD as target disk.  Once the SSD is cloned, disconnect the HARD drive and start.  The start of shoul for the SSD system.

  As for a video, here is a card that has very good reviews.  Read the reviews to see what users have to say about it.  It should work well with your power supply unit (PSU).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP envy 700 019-desktop computer: how to find software recovery

  some of my software programs have stopped working, I found out how do it before but now I forgot how I got to reinstall them. Can someone tell me please how to restore and or repair.

  It works similarly for HP pavilion laptop also running 8 64-bit windows.

  Thanks in advance.

  New emma22 Hi,

  Thanks for the quick response!

  As I understand it, it's your laptop that does not have the Recovery Manager, the RECOVERY Partition is missing from this computer, the laptop is not able to rip a CD with the multimedia player you indicated above, and that you are not able to find the laptop using the network of the homegroup. I'd love to help you with these questions!

  To activate the laptop to rip CDs to your Media Player, I advise you to follow the steps described in this document on rip music from a CD. To re - install the RECOVERY Partition and the Recovery Manager on your laptop, please follow this resource on getting a disc recovery HP or HP USB recovery disc.

  To discover devices on your network to homegroup, I recommend later in this document on homegroup from start to end. If you are still not able to rip CDs or to identify the laptop from the desktop on the homegroup, I suggest you contact the Support technique Microsoft for assistance.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• HP Envy 700-430QE: black screen after log on

  My computer updated something and required a reboot.  Before rebooting, I had inadvertently downloaded Strong Signal.  After removing the signal strong, I rebooted my computer.  I had the logon screen and connected.  The screen went black without tiles, icons, start button or any Visual (QC) I used Ctrl-alt-del to access Task Manager.  In the Task Manager, I was able to access various programs, including my google browser.  However, I have no access to the start, a victory 8 tiles or office.

  Someone at - it expeieced this ad, if any, what was the soluton.

  I'll probably have to try a restore of the system however I was hoping there is a more simple/fast solution if this has happened to others.

  Hello

  You are welcome

  Just to confirm, was the entry that you found Binkiland?

  If that corrects, I would suggest AdwCleaner download from the following link to clear the files - save it in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  Kind regards

  DP - K