HP Envy all-in-one: how to show the password

I'll put up my receipt just HP Envy all in one, and, while I have my Outlook dot com username and password configured properly, I am repeatedly asked for my password, even within the same session, whenever I go to a different application.

This wouldn't be quite so bad, if I could at least see what I type, but I have to type blind every time.

Since I work alone and my office is locked when I'm not here, this seems like overkill.

Surely there is a soultion?

I am a fairly experienced computer user, but this is the first time that I have set up a computer from scratch.

I just Windows 7 Professional.

Any help much appreciated.

Advertisement

CJ.

This can help.

http://www.askvg.com/how-to-disable-show-password-button-in-Windows-8-Windows-8-1-and-Internet-Explorer-Web-browser/

REO

Tags: HP Desktops

Similar Questions

  • Flag r-110 all-in-one: how to use the microphone internal hp r-110 all-in-one

    I know where the internal microphone, but how to use it? I always had an external mic in the past. My r-110 HP all-in-one is new so still get acquainted with it. What I need to set up the microphone and if yes, how and where. Win 10 has a configuration of mic with voice training / recgonition, but it does not show internal mic as a choice so I'm stuck! I would try to make a recording of the voice, but have no idea how activate the microphone. HELP and THANKS

    @terrib

    System is (perhaps) one of:

    Results for ' Pavillion r - 110 all in one " (51)

    Select System > product Home Page >

    Product information > category: specifications

    Form example:

    20 - r110d of HP TouchSmart all-in - One PC product specifications

    Microphone and Webcam are located at the front of the computer, along the top edge (top of the screen).

    If your taskbar contains the small speaker icon,

    Right click on the speaker icon >

    Playback devices > recording >

    Check / confirm that the "internal microphone" is selected as the default device

    You can also find the control of 'His' in:

    Control Panel > display icon > Sound

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • HP Envy all in one PC: Recovery Manager, the system restore is disabled by a virus

    Had a virus on my all in one PC envy after a free update to windows 10. Computer has been closing down could not get antivirus to work fast enough. After reboot system had disappeared. There is now no operating system. HP Envy Recovery manager, System Recovery is not highlighted, do not not the possibility to do a restore? Virus stronger than I've ever met. Thank you in advance.

    NIP

    Hello;

    Let me welcome you on the HP forums!

    It would NOT in fact the virus which prevents HP Recovery Manager to work.

    While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!

    If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752

    What you would really need to do, is to erase the entire disk and restore your PC using something known as HP recovery media.

    HP recovery media is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.

    You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

    Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.

    Or, if you prefer, you can do the same by contacting HP Customer Service:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

    If you have difficulties to find a phone number, then try: 1 (800) 474-6836

    If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck

  • Pavilion Touchsmart all-in-One: how to install the SSD in Touchsmart F234? What form factor is necessary?

    Will be HP 20-f234 enhancement by replacing the HDD with SSD.  Two questions:

    1. is there a video (or even a set of complete step by step instructions would be) Bay of any place that illustrates how to get the HARD disk inside?  (Remove screws, etc.)

    2. what form factor SSD is supported?  That is, will I need an adapter of some sort support if I have a 2.5 SSD "?

    Thank you.

    Seems to be a 3.5 "desktop drive

    How to replace the hard drive

    http://support.HP.com/us-en/product/HP-Pavilion-20-all-in-one-desktop-PC-series/5359028/model/5365334/document/c03690508/

    Your support page

    http://support.HP.com/us-en/product/HP-Pavilion-TouchSmart-20-F200-all-in-one-desktop-PC-series/5359028/model/5365334/how-to

  • HP C7280 printer all-in-one: how to stop the software installation on C7280 printer, running for 6 hours

    I completed the installation of the C7280 all in software and it got to the configuration of the printer.  I used the wizard on the printer wireless to locate the wireless on the laptop, but when I tried to search for the printer on the laptop he couldn't find it.  Tried to save because it wouldn't let me move forward on the configuration and it inadvertenly started installation, but this time it will not stop install (6hrs) how can I stop installation and save my previous install

    Thanks for the reply, I have already done 4 uninstall yesterday 7z file level and renamed the file 7z in what has been shown as lacking in the original installation failed.  I was trying to see if I could save the first successful installation after all of the problems.  So, yesterday I did basically what you said and the software is installed and this time the printer has been detected and it works fine now.  Thank you

  • 2540 HP all-in-one: how to check the level of ink with windows 10

    Well well, after 7 years using windows XP pro and my various printers HP over the years, I've always been able to instantly use my HP printer on the screen to see the ink level... I would go to programs... Find (printer todays) 2540 HP... Then click the icon to see my ink level...

    This is not the case with my windows installed 10...  I can print ok, but where is the Maintenance factor?  to clean the heads or see the ink level?

    I suggest that you remove all HP 2540 programs and then re-install thesoftware WIN 10 full.  Bwtween your WIn 8.1 and upgrade an error happened.

  • HP C6180 All in One - how to clean the inside of glass?

    I have an AIO C6180, top of the scanning glass is clean, but the undeneath the strange dust or streaks looming in the analyses. I unscrewed the 4 screws on the top, what else should be removed for it out and clean the bottom or inside this glass? I don't think it can be pryed up at this point with just these 4 screws out, I don't see what other way to remove it or where, there must be a way.

    Please point me in the right direction... Thank you!

    The answer is... do you surgery on it and finally things come off.

    I cleaned the glass, put it back in, screwed it all to the top and the DONE.

  • ENVY 5540 All - In - One Printer: how to change the password want TO 5540 WIFI Direct from HP default to a different password?

    I try the functions on my new 5540 ENVY. Everything is set up and working correctly so far. I just printed a document from my iPad using the WIFI Direct function on the printer successfully. However, the default password on the printer for the WIFI Direct is simply "12345678". Surely, it should be replaced by a more secure password. My friend something printed its iPad - so obviously, this password is not exclusive to me, anyone can print stuff on my printer just for fun and I have a lot of students around me, the problem could become expensive for me and very boring. WIFI Direct signal covers a distance. I contacted HP telephone support, but the process is time consuming and I had to hang up because I had to work. Maybe someone here could give me instructions, and I can change the password when I have free time. I use wifi for internet (cable ethernet only) and the printer connected via USB to the computer. Also, when I turn on my computer (BUT NOT THE ROUTER) on the wireless function, the printer is and what I need to do is enter "12345678" and start printing. There is no guarantee either. Can someone tell me how to change the password for WIFI Direct 5540 envy? Thank you.

    I'm sure that you can change the EWS web page for your printer.

  • envy23 all-in-one 1075: bad image qulaity with cable TV, display of envy all-in-one

    This computer does not have a HDMI input.  Is that what I can do to improve the quality of television?

    Hello @Heavy,

    I understand that you're looking to improve the quality of your listening on your HP ENVY, 23-1075 all-in-One TV desktop PC. I don't see how you can improve quality without upgrading your graphics as any output you do with your computer via USB and will not as good as what your computer displays currently.

    If you decide to update your graphics card I'm you provide a link to the HP Support document: HP ENVY all-in-One Desktop PC product specifications 23-1075, where you will see the specifications that you must follow for your graphics card for replacement under the heading "Intel Graphics Media Accelerator HD (DX10.1).

    I am also including the HP Support document: addition or replacement of a graphic card HP ENVY 23-1000 All in On MXM series desktop PC, that will guide you in the process of replacing.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

  • Where is the USB port on the printer 4500 hp envy all-in-one

    Where is the USB port on the printer 4500 hp envy all-in-one

    So the question for your answer:

    Compatible products for:
    HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)
     

    Color Multifunction and all-in-one
    HP Officejet Pro 8500 all-in - One Printer series - A909
    HP Officejet Pro L7500 all-in - One Printer series
    Mobile inkjet printers
    HP Officejet H470 Mobile Printer series
    Specialty Inkjet Photo
    HP Photosmart A520 printer range
    Printer HP Photosmart A620
    Printer HP Photosmart A630
    Series of HP Photosmart A820 Home Photo Center
    Printer HP Photosmart B8550

    And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

    For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

    All the best...

  • I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

    I have an officejet j4580 all-in-one and I lost the cd, how do I set up my laptop?

    Hey mbuyi

    Please visit the link below to download the driver full features

    HP Officejet J4580 all-in-One Printer Drivers

  • 23 f250 Pavilion all-in-one: How do the BIOS on my card MOM Amd Bolton-d3s?

    I wonder how do I get my amd bolton-d3s in the motherboard BIOS. And if you know can you please tell me how to get to the advanced chipset features. P.S. I have a Pavilion All In One 23 f250 with the original motherboard.

    Please answer as soon as POSSIBLE. Thank you

    Dear customer,

    Welcome to the HP consumer's Support Forum!

    To enter the BIOS, restart the device and keep tapping F10.

    Hope this helps, for other queries in response to the post and feel free to join us again.

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    GR1
    Although I am an employee of HP, I speak for myself and not for HP

  • HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

    HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

    Hello

    Please see the links to check ink levels.

    Check ink levels

    http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

    How can I check my ink or toner levels?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

  • 8600 all-in-One: how to find my printer on a Mac 8600 password

    My printer works well; However, I notice that it is recognized as a network in my wireless settings. If I click on this parameter, do not access. It shows a lock next to the name. How to find the password for the connection?

    Hi @nancybl,

    Welcome to the Forums of HP Support! I read your post and to see that the network password is locked and you do not have this information. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Because the password is not available to you, there is not another way to unlock the printer unless you reset the printer and set it up again back on the network.

    I suggest to not to use a password when you set up the printer again, or save the password for future use.

    Please let me know the result and if there is anything else I can help you. Thank you.

  • all in one fail to print the order 968

    Dell All - In - One Printer968 not answer the print command. How can I fix?

    GLORIAFOSTER,

    First remove the print jobs to remove all blocked the queue print jobs, and then restart your computer and try printing.

    Brand and model of your computer and the operating system is useful. 32-bit or 64-bit?

    What program anti-virus and firewall are you using?

    The Dell 968 printer using the usb cable connection or the wireless adapter? If the wireless adapter has been the printer connected to the network before?

    Rick

Maybe you are looking for