HP ENVY disabled wireless adapter

I used this link:

http://support.HP.com/us-en/document/c03535285

The wireless on my laptop key is orange shiny, but I can't figure out how to make it blue again. I've never used the Wifi on my laptop, at work, school, etc. I've never had a problem until now.

I also used the trick troubleshooting using Windows 8 where you are looking for and then look in the section airplane mode and now I have airplane Mode and Bluetooth to this article, no Wifi.

Can someone help please?

Thank you!!

It would be useful that you have identified your laptop with its full product name or number and the adapter code manufacturer orr wireless PCI\Ven and model name.

-See web document this HP if you do not know how to locate the product number or model number.

You can reinstall the driver for the card through the HP Recovery Manager. The following images were made for previous discussions. Find your adapter wireless among drivers available listed in drivers available from the laptop Recovery Manager packages.

Tags: Notebooks

Similar Questions

  • Enabling/disabling wireless adapter without administrator rights (Win 7 64 - bit)

    Is there a way to toggle wireless adapter without it as an administrator? Our political laptops where user access is limited and admin password is required to install all the software are submitted. Since the enabling/disabling wireless adapter requires Admin rights, users by default are not able to turn on/off wireless. However, our IT Department has confirmed that their policy has nothing to do with the wireless adapter and it's a setting in Win 7. Is there a solution to this? Thank you.

    There is no control of Windows 7 that will allow a user account Standard toggle the WiFi card.

    A Standard user account is limited to the secondary action of switching on & off WiFi using the F7 / Fn + F5 key or the key it is for the model [a switch is often provided in the dialog box Windows-X as well, "Windows Mobility Center" key].

  • HP Envy Touchsmart: Failure on Envy laptop wireless adapter

    I tried to do the following in the suggested troubleshooting tips.   I opened a run prompt and type cmd.   I raised my privileges "Run as Administrator".    The open window with administrator: command prompt at the top of the page and followed steps 2 and 3.

    Reset the TCP/IP settings on your PC:
    1. go to your departure

    the screen menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    However, this is the result I got.     Even if I ran as administrator, he gave me an access denied message.

    C:\Windows\System32>netsh int ip reset resetlog.txt
    Global delivery, OK!
    Reset the Interface, OK!
    Neighbor reset, OK!
    Path reset, OK!
    Reset, failed.
    Access is denied.

    Reset, OK!
    Restart the computer to complete this operation.

    Why my computer tells me that access is denied when I run this function recommended as an administrator?

    This laptop will remain not connected to the internet.   Every 2-3 minutes that I have to turn off Wi - Fi and reconnect and then it will work for some time before she starts giving me messages 'server not found '.

    I reinstalled the wireless driver and the wireless button pilot.

    Donna

    Hi @dberkley ,

    Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your laptop and get HP ENVY with wireless connections. Here is a link for the wireless connection troubleshooting.

    I would use the network of Windows 8 and resolution of the problems of the Internet section.

    I looked for a solution for this and that they indicate on the forums that if you change the channel of the router on a different channel, that might solve the connection problem.

    You could disable IPv6 for the laptop. Some say this helps.

    Solve this problem Microsoft Fix it 50413 here is a link to help as well.

    Make sure that all of your windows updates have been supported and discovered on the network.

    Hope it will be useful.

    Thank you.

  • Envy 17: Envy 17 wireless adapter not found does not

    I'm a model G6U47UA # ABL connection Wireless suddenly stopped working.  When I look at the list of devices I see more the cable adapter, only the Realtech PCIe GBE Family controller. The work of fine wired

    The F12 key to switch the plane indicates on the screen, but the wireless button indicator lights never

    I tried to download new dirvers for wireless adapter.  no change

    I did a hard reset on the system - no change

    Is there anything else I can check before sending it back for warranty repair

    Thanks for the suggestion. Did the scan for the hardware first.  No change.

    Went through all things with... low HP support online Notebook sent back for repairs to the equipment.

  • Want to M6 1225DX: updated HP Envy M6 1225DX wireless adapter

    I'm looking to upgrade the card wireless in my HP Envy M6 1225DX.  Here are a few features on the machine:

    Product # D1E93UA #ABA

    CPU: Intel i5 - 3230M @ 2.6GHz

    RAM: 8 GB DDR3 SDRAM

    GPU: Intel HD graphics 4000

    Wireless: Ralink RT5390R 802.11bgn Wifi adapter

    OS: Windows 7 x 64 (I know that HP does not support this)

    BIOS version: F.26

    The wireless adapter that is currently installed (Ralink RT5390R) only supports SISO and the download speed tops out around 18-20Mbps.  I'm looking to replace this card with a card compatible MIMO and bluetooth, for example a 7260 Intel.

    I read on several forums that HP basically whitelists some cards wireless in BIOS.  I have reviewed the maintenance manual and it has a list of compatible cards I listed below:

    • Atheros WiFi 802.11b/g/n 1 × 1 9485GN and 3012 adapter Bluetooth 4.0
    • Atheros 802.11b/g/n 1 × 1 Bluetooth adapter Combo WB225
    • Broadcom 4313GN 1 × 1 WiFi and Bluetooth 4.0 adapter 802.11b/g/n 20702
    • Module Intel Centrino Advanced-N WLAN 6230
    • MediaTek MT7630E 802.11bgn Wi - Fi adapter and adapter Mediatek Bluetooth 4.0
    • 1 × 1 Ralink RT5390R 802.11b/g/n WiFi adapter
    • RALink RT3290LE 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 690020-001 1 × 1
    • Atheros AR9565 1 × 1 WiFi + Bluetooth 4.0 Combo Adapter 802.11b/g/n
    • Module Intel Centrino Advanced-N 6235 WLAN for the Japan only

    These are the only cards I can run in this machine?  I also read somewhere that HP no wireless adapter like whitelisting in the BIOS, and if that's the case, would a BIOS update fixed this problem?

    I've been watching the 7260 Intel, but I don't know if it would work and would not order it and he has no job.   This adapter could work in this phone or I am I'm confined to the list given in the service manual?  If I'm limited to the above list, no matter what recommendatins to the adapter that will give me what I'm looking for?

    Basically, what I'm looking for in a wireless adapter is:

    • Supports A/B/G/N and AC at 2.4 Ghz and 5.8 Ghz bands.
    • More high speed possible
    • Bluetooth 4.0
    • 1/2 height Mini PCIe form factor

    Thanks for the help

    Hello

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6-1225dx HP ENVY Notebook and supported wireless cards. Yes, these are the cards that are supported in your notebook and fortunately will work with your graphics card and processor.  Some say that just restore BIOS to factory default help if you decide to go with your choice.

    You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

    Thank you.

  • HP envy 15 notebook PC: driver HP Envy 15 Wireless Network adapt

    I want driver for HP ENVY 15 wireless network adapter

    REF: L0C92EA #ABV

    Operating system: windows 7 Enterprise 64-bit

    Hello:

    You need these drivers wireless and bluetooth for this card...

    Driver LAN wireless Broadcom

    File name: sp69014.exe

    Software and driver Broadcom Bluetooth 4.0

    File name: sp66402.exe

  • HP ENVY x 360-15-u110dx: reset the wireless adapter

    I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

    @pjg31660,

    Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

    HP PC - Troubleshooting wireless network and Internet (Windows 8)

    Please let me know how things are going.

    Thanks again for posting and have a great day.

  • HP ENVY 15, PRODUCT # G0T55AV: update to wireless adapter on the envy 15

    good windows 7, envy 15

    product #GOT55AV

    don't know if it's a zero or the letter o

    I want to upgrade my wireless adapter.

    my current card is an ATHEROS QCA 9565 802.11/b/g/n QUALCOMM

    is this possible?

    any recommendations?

    If not possible can I use a USB instead?

    @fran4444

    Intel Dual Band Wireless-AC 3160 802.11 ac 1 x 1 WiFi + BT adapter combo (for use 4.0

    only with HP ENVY 17 computer or computer HP ENVY 15 models)

    710662 005

    Your manual here.

    http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/6936206/model/7174348/manuals/

    REO

  • wireless adapter gets automatically disabled.

    Whenever I restart the system, I lost the wireless network card. So I need to go to Device Manager to uninstall and reinstall the network card. After he reinstall works fine until I have to reboot the system. Suddenly the system startup has also slowed to a lot takes about 5 minutes to start after the Welcome screen. I deleted the temp... just almost done but unable to find a solution for this.

    Hi Rajiv,

    Thanks for posting your query in the Microsoft Community. According to the wireless adapter problem is automatically disabled. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    I suggest you follow the steps in the article.

    Network adapter problems

    Windows wireless and wired network connection problems

    You can read this article for more information:

    How to reset the Protocol Internet (TCP/IP)

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • -SOLVED! -PCI or USB wireless adapter is disabled and will not activate on Windows 7

    The solution: uninstall ZoneAlarm!

    I spent 3 days and 3 different cards, trying to solve this problem. First of all, I bought a Netgear PCI wireless adapter. Installed according to the instructions. Device Manager showed the adapter works properly but turned off and nothing I tried would enable the adapter.

    NETGEAR has taken over to the store and buy a Linksys PCI wireless adapter. Exactly the same problem. Device Manager, said the adapter worked correctly, but turned off and would not turn on.

    So I called Linksys support and paid them only for the remote service and they couldn't get it to work either (of course to return money). They suggest is to contact Microsoft technical support or buy the USB version.

    I went and picked up the USB (WUSB600-N v.2) version today and guess what? Exactly the same problem. Device Manager showed the device works correctly, but turned off and would not turn on. After talking to a few other technicians in addition to myself, we agreed that the only other option was to reinstall windows. But just before I decided to do, I checked one last time to Google and came across a post in the forums of Vista by someone who had the same exact problem, uninstalled ZoneAlarm and then worked their wireless adapter.

    Well, I decided to try that before reinstalling windows. As soon as I uninstalled ZoneAlarm and the computer restarts, the adapter has been activated and automatically found my network! This means that ZoneAlarm control network on the computer and for some reason cards some not allowing a wireless adapter is enabled.

    Then I tried to re-setup of ZoneAlarm. After that I have re-installed, my wireless adapter became instantly disabled and would not turn on again. So I uninstalled ZoneAlarm at all times. My router has SPI and NAT firewall on top of the Windows Firewall, so I need anyway ZA.

    If you have ZoneAlarm, get rid of it. If you still experience the problem of your card activating Wireless does not and have ZoneAlarm, try to uninstall any firewall software 3rd - party that you have already installed (not the Windows Firewall).

    I was really frustrated after spending 3 days with 3 different adapters and many trips to stores using the adapters and buy different cards. I'm glad I found this post on the forums of Vista, so the credit goes to the one who made this post.

    On a side note, after I installed the drivers from the CD and Linksys site, Windows update has shown there is an updated driver on the site of Ralink which I installed it and so far no problem. My WUSB600-N automatically connected to the strip of the 5 GHz on my router dual band and speeds are ultra fast and signal is strong in a completely different room.

    Hope this information helps others finally solve this problem.

    See you soon,.

    Matt

    64-bit, but it should work on either. ZoneAlarm includes network connections and was not what allows the adapter to be activated. Even close ZoneAlarm does not work either. ZoneAlarm must be uninstalled from the card must be activated.

    Vista drivers work fine with this adapter. Then a Windows Update is the updated drivers for Ralink which also work very well.

    If you have properly installed the drivers and display device manager the device works correctly, but disabled, and then uninstall any firewall/antivirus 3 rd-party should do the trick.

    I am a tech, more I consulted other technicians as well as paid for technical support of Linksys and nobody could understand this problem and it's no wonder. Who would have thought that ZoneAlarm or any 3rd part antivirus/firewall software would take complete control over network connections and not to allow a new network adapters must be installed correctly.

    If anyone needs any help other than that, feel free to ask.

  • ENVY of HP TouchSmart m6-k025dx: Wireless adapter m6-k025dx Upgrade

    I wanted to update my adapter dual band wireless. There is a dual band wireless adapters that are compatible with my laptop? If so, which do you recommend? My current wireless adapter is Intel Centrino Wireless - N 2230.

    Hello

    There is a list of cards wireless on the maintenance and Service Guide from the following link:

    http://support.HP.com/us-en/product/HP-envy-M6-Sleekbook/5375391/model/5447426/manuals/

    Good luck

  • Disabled wireless network adapter

    The wireless network adapter in my desktop Pavilion (WE167AA under Windows 7 Home Premium) maintains have turned off. This can be fixed about half of the time by running the troubleshooter from network problems, but the rest of the time, the PC freezes during troubleshooting.

    The problem occurred only in the last two weeks, after nearly four years of perfect operation. I have no manual changes to configurations. Unfortunately I do not have a system restore point from before the show began. Performance on other wireless devices in the same room are very good, so I don't know that this is not a problem with the wireless itself.

    Hello @irpcoldicott,

    I understand that you are having problems with your drivers for your HP Pavilion p6320uk Desktop PC WiFi keep turning off. I provided you with the Original Ralink Wireless Networking Controller Driver, which is the WiFi driver for your computer running Windows 7. I suggest download you and follow the steps below:

    Step 1. Click Start

    Step 2. Click on Control Panel

    Step 3. Click on Device Manager

    Step 4. Click on network adapters

    Step 5. Right-click on your Ralink Wireless Adapter

    Step 6. Click on uninstall

    Don't forget to remove the driver

    Step 7. Now install the downloaded Original Ralink Wireless Networking Controller Driver previously.

    Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

  • HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

    I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

    HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

    In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

    Below is a screenshot of what I mean.

    Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.

    The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.

    I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

  • Envy 14-3010NR wireless adapter issues, this is a strange...

    Hello, I have a 3010NR Envy14 spectrum with Intel Centrino Advanced N6230 wireless adapter. Driver is 15.9.0.5 dated 16/06/13 dated. I've updated the operating system first to W8 and then to W8.1, since I had problems with the wireless, I had to work at some point after the update of the bios F.06, then when I started the other day, wireless.

    I have search in the diagnosis of F2 and it says that the adapter is not installed, when I do a test of component... However when I go to Device Manager / network adapters / click on display / hidden devices, this is, when I look in the properties, he said ""currently this hardware device is not connected to the computer"(code45)". "" To solve this problem reconnect you this hardware device to the computer.

    I also have the same problem with the wireless button on the keyboard that I see a lot of people, when I press on it now it switches airplane mode on and outside, where it is used to turn the WiFi on and off... It's always a white light, the orange light that lights up when wi/fi was off is now gone...

    Notice to fans, it's really weird... Thanks in advance

    Hey jagnewr,

    Thank you for all the information in your message. For the error code that you get in the Device Manager, it means that the device is connected is no longer http://bit.ly/18I67As.

    I've included the manual 'Guide to Service and Maintenance HP ENVY14 SPECTRUM'. Please open page 52 and follow the steps to remove the WLAN module. Remove and reset the module.

    If you are still not able to connect, and the error code 45 is still present it most likely that the wireless card no longer works.

    Good luck!

  • Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

    I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

    Download and install the current drivers of TP-Link.
    Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

    Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

    Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

    All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

    After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

    1. Uninstall NETWORK card and USB drivers and devices.
    2. Then uninstall the AntiVirus (in this case AVG Internet Security)
    3. Reinstall the NETWORK card and drivers
    4. Reinstall AntiVirus

    Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

    Everything works very well.

Maybe you are looking for