HP ENVY dv7t-7200 CTO Quad Edi: admin password bios

Similar Questions

• HP ENVY dv7t-7200 CTO Quad Edi: dv7t-7200: Microphone is not compatible with Windows 10

  I have upgraded to Windows 10 last night.   When I tried to configure the new Deputy of Cortana listen my mic system could not hear me.  Finally, the Setup process fails and says that my microphone is not compatible.

  All race through this issue?  Someone at - he was able to solve it?

  Mike

  HP ENVY CTO 7200 dv7t Quad Edition Notebook PC

  Product number: B6B75AV

  window press the key and the x key at the same time to bring up a list go to control panel select sounds

  under the recording tab {if you have built in webcam there is a microphone next to it}

  choose right headphone click Choose set the default device

  Click on start then stettings then choose the Date and the word

  left side of windows, select speech then Middle bottom of page under click Microphone start calibration

  with mine I can't be to far away from the microphone, but once it calibrates it should work... window 10 messed up my audio so

• HP ENVY dv7t-7300 CTO Quad Edi: what part of replacement fan that I get for my laptop? Memory discrete or UMA?

  Hello, I have problems finding the right replacement for my hp laptop part. I have a laptop that needs to have his replaced fan/radiator. The laptop is the HP ENVY laptop dv7t-7300 CTO Quad Edition. I went online and find the service manual for the computer to find the spare part. There was a list of spare parts for the different variants of models.

  The results of narrowed it down in 2 results for spare parts. A fan/radiator was for a graphics subsystem with discrete memory and the other fan/radiator for a graphics system with memory UMA. I don't know which one is for my computer, could you please help clarify? The part 682061-001 or 682060-001 part?

  Model No.: dv7t-7300

  Product #: C2Y65AV

  [Personal information]

  Hello

  No, I'm talking about Device Manager. Hope that the sticker is good then your machine's discreet graphics because:

  • The UMA version applies to the motherboard that does not have a separate dedicated graphics chip. On this version, the graphics processing is managed by the North bridge chipset.
  • The discreet version applies to the motherboard with a separate chip to achieve all the graphics processors.

  Based on the sticker, your machine has NVIDIA GEFORCE GT M 635

  Kind regards.

• dv7t-7200 CTO Quad Edition Notebook PC - errors after 8.1 update update and HP

  I have a HP ENVY CTO 7200 dv7t Quad Edition Notebook PC
  Product number: B6B75AV

  Originally from Windows 8 Pro with Media Center 64-bit

  Upgrade to WIndows 8.1 via the shop
  Everything seemed OK

  HP Support Assistant eliminated 2.1.0.1002Ap4 contained in SP58398 which has updated the driver Intel Rapid Start Technology.

  (A) after the start, I now get an office messages "your system seems not to have Intel Rapid Start with technology."

  (B) if I start the Intel Control Center, I get the message "there is currently no application filed.

  (C) if I start the Intel Rapid Start Technology Manager, also get "your system seems not to have Intel Rapid Start with technology."

  (D) also, if I try to use an application to read data S.M.A.R.T, which also fails

  (E) However, I get the info of PassMark DiskInfo:
  SysInfo DLL Version: SysInfo v1.0 Build: 1041
  Export: 16:18:18 November 18, 2013

  The device information:
  Device ID: 0
  Interface: RAID
  Capacity of the apparatus: 715402 MB
  Serial number: {information}
  Model number: ST750LX003-1AC154
  Firmware revision: HPM1
  Sheet music:
  N/A

  The ATA information:

  Geometry of the disk:
  Cylinders: 0
  Tracks/cylinder: 0
  Sectors/track: 0
  Bytes/sector: 0
  Total of the sectors of the disk: 1465149168
  Logical sector size: 512
  Physical sector size: 4096
  Media rotation speed: 7200 RPM
  Buffer size: 0 KB
  The ECC size: 4 bytes

  Compliance with standards:
  ATA8-ACS taken in charge: Yes
  ATA/ATAPI-7 taken in charge: Yes
  ATA/ATAPI-6 supported: Yes
  ATA/ATAPI-5 support: Yes
  ATA/ATAPI-4 taken in charge: Yes
  Series/parallel: Serial
  SATA 3.0 Compilance: No.
  SATA 2.6 Compilance: Yes
  SATA 2.5 Compilance: Yes
  SATA II: Ext Compilance: Yes
  SATA 1. 0a Compilance: Yes
  ATA8-AST Compilance: Yes
  World wide ID: 5000C5005DF1063B

  Feature support:
  CHIP supported: Yes
  CHIP enabled: Yes
  SMART taken self-test supported: Yes
  SMART error log supported: Yes
  Taken LBA supported: Yes
  Taken IORDY supported: Yes
  CFast taken in charge: No.
  Taken DMA supported: Yes
  DMA multi-word maximum mode supported: 2
  DMA multi-word selected: None
  Ultra maximum DMA mode supported: 5
  Ultra DMA is selected: 5
  Maximum PIO mode supported: 4
  SATA compliance: Yes
  Supported NCQ priority information: No.
  Unload while NCQ commands are exceptional supported: Yes
  The event of PHY counters supported: Yes
  Application of sustained power management: No.
  Set of features taken NCQ support: Yes
  SATA Gen2 signaling speed (3.0 Gb/s) supported: Yes
  SATA Gen1 signaling speed (1.5 Gb/s) supported: Yes
  Software Settings Preservation: Supported, enabled
  Provision of data in the order: unsupported
  Initiate power management: supported, Enabled
  DMA Setup self-actuation: unsupported
  Buffer of zero offsets: unsupported
  Trusted Computing taken in charge: No.
  Host Protected Area (HPA) taken in charge: No.
  Read-ahead support: Yes
  Predictive read enabled: Yes
  Support for write cache: Yes
  Cache write-enabled: Yes
  Power management support: Yes
  Security mode supported: Yes
  Security mode is activated: no
  Device Configuration Overlay (DCO) taken in charge: Yes
  Supported 48-bit addressing: Yes
  Auto-acoustic management (AAM) supported: No.
  Start standby (THEN) supported: No.
  Advanced Power Management (APM) taken in charge: Yes
  Advanced Power Management (APM) enabled: Yes
  Current level of APM: Minimum energy without waiting
  CompactFlash Association (CFA) taken in charge: No.
  General Purpose Logging (GPL) taken in charge: Yes
  Streaming support: No.
  The media card support through: No.
  Supported power conditions extended: No.
  Scope of supported status reports: No.
  Writing-reading-check supported: No.
  Supported free-fall control: No.
  TRIM command support: No.
  SCT command transport supported: Yes
  NV Cache enabled: no
  NV Cache support power management: No.

  SMART ATTRIBUTES:
  ID Description status worst threshold value TEC gross
  ---------------------------------------------------------------------------------------------------------------------------------------------

  Any ideas what is it?

  I tried to save the patch that HP has pushed out, but I didn't, my system state would be if I did.

  Any ideas?

  Thank you!!

  xzr1tv

  Install the new BIOS F29 with

  Supports the feature of Intel iRST systems

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en&OS=4132&product=5328068&sw_lang=

  Intel Management Engine Interface driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124055-1&CC=de&DLC=de&LC=en

  Update the RST

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

  Chipset

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&ProdId=816&lang=eng&OSVersion=Windows%208.1 * & DownloadType = drivers

  Check your settings in Bios of RST

• Should I update my PC HP ENVY dv7t-7300 CTO Quad Edition laptop

  I have two laptops

  Product name: HP ENVY dv7 Notebook PC
  64-bit Windows 8
  Product number: C2Y69AV
  HP ENVY CTO 7300 dv7t Quad Edition Notebook PC

  Product name: HP ENVY dv6 Notebook PC
  64-bit Windows 8

  HP ENVY CTO 7300 dv6t Quad Edition Notebook PC

  When I go to the HP Windows 8.1 that they have not been tested for compatibility.

  I would like to know if I have to spend?

  Tech

  T3CH,

  HP cannot do.  It is a problem of license with Microsoft I think.  There are lawyers involved.

  -wes

• Pavilion dv7t-6100-cto-quad: I can't get the new drivers on the hp support site

  I have restored my ssd from disks that I made the computer when I bought it and I did everything I know to do and can not get the hp support site to give me a list of drivers for that computer. I know there must be some updated drivers for the computer 3 years, but I don't know how to get them and it is interfiering with other programs or drivers that need updated drivers that I can't. Please help me with this. I learned that the site is in place and current, but it does not work as far as I can tell, for my portable quad, dv7t-6100 cto. Everything continues to run and never becomes pilots. Thanks for any help in getting this resolved.

  REO51ST

  is older than me - the site is always down.

  fishcrazy13

  Here is a workaround:

  Drivers HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC Windows 7 (64-bit)

  It's somewhat austere course - this isn't the site of HP, so you won't see the full Support pages of manuals, operating instructions and troubleshooting.

  I checked the other models - those I previously checked watch this site matches the drivers supplied by HP for the model and the version of the OS.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Envy dv7t-7200: SSD upgrade in 2nd slot on HP Envy dv7t-7200. Cannot find or run the Bios

  So I added recently internal a second drive in my HP Envy dv7t-7200 because she had a second slot. The first was a 1 TB HARD drive and what I added is a compatible 500 GB SSD from Crucial. At startup, the SSD was not recognized as I can't find anywhere in my computer to use. Also, I tried to go into the BIOS to see if the second part of the motherboard to the drive 2nd spot has been activated but now the computer starts too fast and I can't enter the BIOS. Given that nothing is installed on disk 2, I have no idea why the computer starts much faster. Would it be due a QuickLaunch for the BIOS update can I have recently installed? If so, how to uninstall that?

  I also wanted to just insisted on my laptop as possible and that's why I decided to upgrade, any help would be greatly appreciated.

  A new empty ssd drive will not be displayed in my computer (PC), until the disk is initialized and formatted. Right-click on computer and choose manage... disk management and see if there is a new blank disc. If so create a new volume in it (partition) then format then assign a drive letter.

  You want to have the OS on the SSD and have it in the main location as only a car in this slot is bootable. You lose the speed of the SSD in the second location for pure storage. As hanging Secretariat up to a plow.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy x 2: admin password bios

  Having a problem with the password bios admin.

  Typed in 3 times, go back to the 8 digit code: 51052608

  Any help would be appreciated.

  thanx

  Hello

  Use the code to reset below

  44930228

  Or you can generate one in the future from the link below

  http://BIOS-PW.org/

• Pavillion DV7 - 3188cl: Admin password BIOS

  Hello

  I just bought this laptop but does not reach the BIOS to change boot due to an admin password options. Can anyone help please.

  The code that I get after three invalid attempts is

  Disable the system 69403154

  Thank you for your help.

  Hello:

  Enter this password to unlock...

  76561190

• HP laptop: admin password bios

  I have a HP laptop which friend set an admin / power password bios which is no longer, he remembers. After 3 attempts having failed, I get a code 93381416 system off. Can you please advise me as to how I can remove this password as my laptop is now worthless.

  Hello

  Enter 22089438

  Kind regards

  DP - K

• HP 15: ADMIN PASSWORD BIOS

  my computer has been deleted and I can't install anything cause I can't Gget to the start menu cause he is an admin password

  I got the System disabled code of 88094375

  Hello

  Enter 37992971

  Kind regards

  DP - K

• ENVY dv6t-7300 CTO Quad Editio: Envy dv6 IDT sound card does not

  Recently, the sound card for computer laptop has had problems. For a month or two I get appears randomly in my audio using several 1/8 "cables to my speakers and headphones.  Now my problem is that the card is not to give me audio quality and it seems that I need a replacement. Its really quiet compared to normal and audio pieces of low frequencies and sounds just awful.  My laptop is an essential part of my work, so I would like to know what options I have to replace. First of all, I want to make sure that the card is replaceable quality even if not better. Secondly, is it possible for me to get the part sent home to replace me myself or maybe take in my laptop to the building to take only a short amount of time with her. I'm running on an audio interface I already owned for a long time, but it is inconvient for me to use when im to mobile OS. Please indicate all the options that I have new maps that will be filt with my current laptop (HP ENVY CTO 7300 dv6t Quad Edition Notebook PC), and all the options I have for the replacement of the card (remove old and replace it with the new.

  @Xx_Lucas_xX

  The Riddle_Decipher is at your service!
  
  I understand that you have been troubled by Audio drivers

  • I recommend you update the BIOS by using the tool HP Support assistant or the HP website.
  • Once you update the bios > uninstall the current sound driver by using Device Manager > then use this LINK (ditto) to download the updated audio driver and that should fix this problem.
  • For a diagnosis more > click here
  • I also suggest a test of material on the sound card to be on a safer side: click here

  Keep me posted!

  Kind regards

• How can I remove the keyboard from a HP Envy dv7t-7200

  Hi, as the title suggests, I can't figure out how to remove the keyboard of my laptop, I unscrewed everything inside and removed the DVD tray, press the hole to lift the keyboard and the corner rises well, but two-thirds along the way the keyboard seems to be ensured by a tab or a lock , I guess there is something I'm missing, something I have to press to help completely free the keyboard, I think that there is a tab that is clicked, the manual mentions nothing about it.

  I read this:

  http://h30434.www3.HP.com/T5/notebook-hardware/removing-keyboard-from-HP-envy-dv7-4000/TD-p/3230343

  My problem seems to be substantially the same as his, unfortunately, the video who said his doubts is private. Can someone help me out here? I don't want to break the keyboard and I'm desperate, I saw tons of videos on other models, but they don't seem to have this feature. Will you please reply as soon as possible because it is a delicate task for me.

  Thanks in advance for the help you provide.

  I assume that you have the Manual:

  Manual

  See page 61. The sides of the keyboard have a small flange that goes under the "lip" of the hole in the lid of the top of the keyboard page. Get a spatula plastic under the edge of the keyboard and move around where you can pop out over the lip. He sticks in there a little and you can fold the keyboard a little to get him out of the opening. It'll probably take a little more force you have been willing to apply.

• Bluetooth problem: HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC

  Hello forums HP!

  I have problems with the bluetooth in my HP dv7t-6100.

  I am no longer able to see/add devices bluetooth with Windows 7 is to add a device. He was working a few weeks ago, but was (waking up from his sleep would cause the device to turn off and I should enable in Device Manager to operate).

  I tried unistalling, then reinstall the drivers Wifi and different bluetooth drivers, but I can't see my bluetooth devices (which I know work btw).

  

  Try to add the com ports manually does not work, and I can't remove them later, because I get the message error "the specified service does not exist.

  And by clicking on "Choose a COM port for a Bluetooth device" brings up the help page for Spider Solitaire, which makes no sense.

  Any suggestions?

  Thank you!

  WELL, I GOT MY BLUETOOTH WORKS AGAINN!  (Sorry for the caps)

  After turning around uninstalling and installing drivers for many hours, deletion of registry keys, reseating the bluetooth module, I finally found something that worked.

  I have installed the Toshiba bluetooth stack software and unfortunately, my bluetooth has started working again! Wohoo!

  It was difficult to settle at first it seemed that the installation froze on the driver real bluetooth, but just cancel and start the program caused to function normally. (I think its because my stack of drivers/bt bt were corrupt and I couldn't make them disappear completely).

  So, if your bluetooth stops working to the point where mine was to, try another bluetooth stack. It should not be Toshiba, but it happens to work with my HP laptop.

  SEE YOU SOON!

• HP Envy dv6 7200 CTO: has stopped working

  Hello world.

  I have a problem with a stopped working error. When I opened the call of duty 4 Multipalyer and play for 5 to 6 minutes (sometimes up to 15 min) it give stopped working error (iw3mp.exe has stopped working). I use coolpad for the laptop to control heat. and I try these solutions:

  1 turn on the stereo mix

  2. put the socket for headphones

  3. put the microphone jack

  4.mssmp3. ASI-> mssmp3.bak

  and my problem not solved. Now what can I do with this error and my laptop?

  Thank you.

  HKN

  Hello;
  
  Let me welcome you on the HP forums!
  
  Sorry, but it's just a volunteer community support forum and we have no possibility for debugging problems with third parties (i.e., no HP) applications.
  
  For help with COD4, yout best bet is to see if the game provider has a support forum and post your concerns there.  You are more likely to help in this way.

  On an overheat, here are a few troubleshooting steps you can try: HP laptops - reduce the heat inside the PC to prevent overheating. HP® customer support

  Good luck