HP ENVY h8-1400z: impossible to install a new copy of Windows on HP ENVY h8-1400z

Similar Questions

• How can I uninstall Windows 7 and install a new copy of Windows XP?

  How to UNINSTALL Windows 7 and INSTALL a new copy of Windows XP?

  Assuming you have a "Full Version" of Windows XP, start from the Windows XP CD and when the installation menu appears, delete the existing partition, create a new partition and format NTFS, then install. Carey Frisch

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• Need to download & install a new copy of Windows 7 Pro 64 bit for strongly modified pc OEM

  Original of the hard drive has crashed, please download & install a new copy of Windows 7 Pro 64 bit on new SSD. I updated day/has replaced most of the OEM parts to 4 + years except for the motherboard, power supply, & tour. I don't have the old parts, sort of recovery disk installs not successfully because of all the improvements. Have drivers for devices newer than all existing parts on a USB ready when necessary. OEM is telling me to go up the PC with its original components to make it work, and I really don't need all the unnecessary software OEM includes in their recovery disk. Microsoft Download site does not allow me to download from a pc OEM product key. How to solve this? I'm always in the respect of the Windows license agreement, so I don't have to pay for it.  Please advise, thank you

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• How to install a new copy of Windows XP SP the protégé 2000

  I have this P2000 for a month, which has a running version of Windows XP Professional. Because he had met with problems and frequent crashes and delayed the restart and learned to become slow to a point where the startup until you see the windows desktop appears to be a success.

  I took the necessary upward and now intend to install a new copy. I burned a Bootable CD containing to implement files and tried to start the P2000 with a USB-CD/DVD-ROM. I even changed the bios setting to boot from the CD-ROM, and yet it does not start. It indicates an error.

  My HARD drive is MK2003GAH 1.8 inches.
  CD-RW/DVD drive is h Data Storage Model No. GCC-4241N TYPE SO GYGO REV FW:OP34.

  Intel Boot Agent Version 4.0.10
  Copyright (C)
  PXE - E61: Media test failure, check cable
  PXE - MOF: Existing Intel PXE ROM.

  and proceed to loading windows XP for over 25 minutes and restarts again.

  Yes, I read some discussion on how we could use a PCMCIA card and everything. But I am naïve. Help, please.
  Thank you.

  Samir

  the problem is:
  1: your portege bios does recognize that some machines CDROM
  2: the installation procedure for Windows XP do not know how to deal with these CDrom devices

  the only way is to return to a DOS (fat32) environment and load the appropriate drivers for your CD-ROM USB from a floppy, then start the BACK-XP Setup (winnt.exe)

  In these discussions, you will find all the information you need:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  success

• Can not install the new copy of windows xp home edition

  A friend has built a computer for me and my friend it works for me.  Everything goes ok, then it stops working because the friend has installed a pirated copy of Windows XP Professional on this topic.  OK, I'm a little angry, but I can cope.  I had bought a new copy, never been used before, Windows XP Home Edition a couple of years to my old copy that I ended up not using.  When this happened, I thought it would be great, I could install that.  So, I turn on my new computer and let it boot.  When it comes to the screen, saying that I don't have an authentic copy of Windows installed, I open my CD drive, and then press the button so he can go back into the computer.  I have no mouse or keyboard control so I can't select all and nothing happens after that the disk will inside.  Nothing, I can't even hear anything running.   I would try to solve this problem without having to take Office Depot where they charge me $ 99 for "try" to fix it.  I don't have a job, so fix me it is my only option.  Any help out there in the cyberland?  Thanks for any help.  I'm on my dad's computer if you're wondering how I'm even able to send this way.  Laughing out loud

  I do not understand what you're doing or why nothing seems to happen, but the fundamental question that you have, it's that you cannot "upgrade" from XP Pro to XP Home.

  Assuming you can still start Windows (even if you get the notice that it is not authentic), copy all your data on some external support (external drive, USB flash, CD, DVD) and then perform a new installation of XP Home.  Once Windows is installed, you need to restore these data and you will need to re - install applications (programs) that you have installed (for example, Microsoft Office), so you'll need to find the installation for the applications media.

  Because it is a home-built computer, you must obtain all the necessary drivers on the web sites of various hardware manufacturers.  Most likely you will need are motherboard (chip), display (video), (audio), network (including wireless and modem) and any device (e.g., printers).

  Use the computer that you use to post here in order to download drivers and save them to a flash drive or burn them on a CD.

  I guess that your boyfriend (ex?) didn't give you all the documents with the computer (e.g., the motherboard manual or manuals for other equipment he installed).  If you can enter in your current Windows installation, click Start > run > msinfo32 > OK.  Click on the 'Components' category and look at the different devices to determine their models and manufacturers.  Motherboard information (you need to get the drivers of chip set) is not indicated in msinfo32.  Use BelArc Advisor (free)

  How to do a clean install of XP:

  http://www.theeldergeek.com/xp_home_install_-_graphic.htm
  http://michaelstevenstech.com/cleanxpinstall.html

  Don't forget - when installing from a Windows XP CD, you'll probably not the current service pack (service pack 3) and you will certainly not have current security patches.  You too have an antivirus.  Get instant access to Windows Update (do not go to other websites) and download critical updates.  Probably, this will take time and may require several reboots and go back to Windows Update.  When all updates have been installed, install an antivirus.

  If you are willing to pay for an anti-virus, eSet NOD antivirus (not the "suite").  Otherwise, I suggest Microsoft Security Essentials or Avira AntiVir Personal.  At some point after that things are settled down, you should also get the free versions of MalwareBytes Anti-Malware and SUPERAntiSpyware.  You don't need the "pro version" that work all the time; You must only update and run these scanners on a periodic basis just to be sure that you have not picked up a malware that is slipped beyond your anti-virus.

• Certificate of authenticity will work after you install the new copy of Windows 7 64-bit?

  * Original title: COA

  Hi all

  I bought a used Dell laptop which still has its COA on the bottom of the unit.  Apparently the device was installed with Win 7 when new.  I would like to install a new copy of Win 7 64 bit, but would not know if the COST I would work since there is no information if the original installation is 32-bit or 64-bit.   Thanks for any information you could share with me.

  TT

  The COA will work as long you have correspondent reinstall media:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Other options:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• After you install a new copy of Windows 7 and updates, download now not a genuine copy

  I installed a new copy of my subscription to windows 7 pro N everything worked ok until he says is not a genuine copy, I got here with my subscription then done some update so why might occur

  Hello

  Have you replaced any hardware, or reinstalled Windows 7?

  It is possible that the store of licenses of Windows 7 may be damaged or unreadable. Try the steps below to re-create the store.

  (1) open an Internet browser
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop sppsvc (it may ask you if you're sure, select Yes)
  Note: the Software Protection service may not be running, that's ok.
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start sppsvc
  (10) type: slui.exe
  (11) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can
  happen automatically.

  If you have a product key, you can re-enable Windows 7.

  1. click on the Start button
  2. type: slui.exe 3 and press the Enter key
  3. Enter the product key from the sticker on your computer
  4. click on the next button.
  5. you will be asked if want to enable, click ok

  You can also activate by phone as follows:

  1. click on the Start button
  2. type: slui.exe 4 and press the enter key
  3 select your location from the menu drop-down and click on the next button
  4. the next screen provides the number to call to activate by phone

  How to contact a Microsoft Product Activation Center:

  http://support.Microsoft.com/default.aspx/KB/950929/en=us

   
  For reference:
  Refer to I see messages that Windows isn't genuine. How can I solve this? from the following link and check:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ
   
  Hope this information helps.

• Windows 8 reset has not installed a new copy of windows - PC encountered a problem :(

  I use the computer laptop hp pavilion with windows 8 pre-installed top when I bought the laptop. It was working fine until 2 weeks ago when I tried to update windows 8.1. All other updates for windows 8 have already been installed. After installing windows 8.1, the screen started to Flash and flicker. I didn't know what was the problem in spite of the fact that I tried to search and find out if everyone knew the same problem. Anyway I tried to update my PC to return to windows 8, and when I did, I started having this bug saying something like:

  Your PC ran into a problem, he needs to restart. We will collect some data, then we will restart for you.
  And then the PC restarts. I was frustrated by the presence of mistake over and over again. Then I copied all my data on external hard drive and decided to put my windows to get a new copy of windows 8 is installed. But he also didn't work. After the reset, I noticed that it wasn't a "Reinstall" clean at all. My desktop wallpaper has been same, my home page was even - he remembered my preferences. And once again! I'm having the same error as mentioned above, very often. Its very frustrating and I'm getting very excited now and I don't know what else I can try. Please help me someone...

  Thanks for the reply of Mr. Martin.

  Well, before you try the method that tells you, I used the HP Recovery Manager tool to reset my windows and the software to its factory settings and fortunately it worked. It reset my laptop with its settings from the factory with all the removed disk partitions, but of course, I made a backup of all my data. Its job well now for windows 8.

  Thanks again for your support.

• What is the difference between a) install a new copy of Windows, b) perform a new installation and c) reinstall Windows?

  Hello

  What makes them different?  In addition, one of these facilities/re-facilities removes everything, and one of them that keeps the files, applications, and settings?

  Thank you

  Assuming you're on win 10 (you do not specify) there are three things you can do

  Refresh > keeps your files and restores system files and folders. (retains most settings)

  Reset > you delete files and folders and restores the original operating system (keep anything)

  Pure install > remove everything and re - install a Virgin copy of the operating system (keep anything)

• cannot connect to internet - after installing a new copy of Windows Vista

  my computer is very slow and I decided to install a clean copy of vista, and now I've finished my computer does not connect to the internet more. It will work with the wireless or wired Ethernet.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > search for the latest network maps, etc. Vista drivers for it > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Mick Murphy - Microsoft partner

• Will I be possible to format my hard drive by installing a new copy of Windows XP Professional?

  original title: will install XP Pro. format my hard drive for me?

  My laptop drive has failed and a friend gave me one, but it doesn't have a Toshiba hard disk drive.

  My XP Pro drive reformatted replaced disk?

  Thank you

  Roger.

  I don't know what you're asking.

  Are you saying that you have an XP Pro installation CD and want to use it to reinstall Windows on the spare drive Toshiba?

  If so, yes it works, Windows does not care what kind of drive you have (also long has enough space).

• Install a new copy of windows.

  Hello

  I bought a laptop Lenovo B50-80 with i7 u5500 16 GB RAM Radeon graphics card with windows 7 pre-installed pro m330 r5 [expandable to 10 windows].

  It was slow from the beginning, [not the hardware problem] I want to re install the operating system by using my key in the bios. I tried to download windows using this key, but was refused.

  All I want is a new installation of the operating system. Because of this problem, I now use my USB mobile linux.

  Best regards

  Aurore.

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  https://NeoSmart.NET/wiki/Lenovo-recovery-disk/#Recover_Windows_7

  Another option:

  https://NeoSmart.NET/wiki/Lenovo-recovery-disk/#Create_the_recovery_disk_for_Windows_7

  Other options to consider - more complicated:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• How to use Recovery DVD to install the new copy of the OS and CUSTOM PARTITIONS?

  Hello

  I have problem with appropriate recovery likely to start the recovery DVDs Thoshiba function created.

  I burn two DVD with the creator of recovery Toshiba Media witch was pre-installed on my computer. Now, I want to use it to install the new copy of Windows 7 OS on my laptop. BUT I don't want to erase entire HARD drive. I want format only the C: partition and let the data on my D: partition. I also want to set the size of the C: partition.

  When I insert DVD and start to form, some app start but display info that every partition is removed. I can't choose another option.

  How can I do?

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
  I think that everything has to be explained here. If you have any other questions please let us know.

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?