HP ENVY j073ca: unable to determine the version of HDMI output on my laptop HP envy. It is 1.3 or 1.4 bis?

Hi I tried to determine the version of my laptop HDMI port HP ENVY 17 j073ca however I have found no info on this subject.  Could anyone help shed any light on this?  Thank you!

Advertisement

Hello

Many TV can make upscan which means that they accept the entry at lower resolution and then fill the entire screen. I don't know your TV/monitor, but normally it can do the work in this way.

Update: all modern televisions must have a lot of options for entry reports, you can watch old movies (ratio 4:3) on the use of 16:9 zoom function.

Kind regards.

Tags: Notebooks

Similar Questions

  • Unable to determine the current location by this time El Capitan

    Hello.

    Recently, I have this problem with my Macbook pro. I turn on location services, as you can see...

    ... but my computer is unable to determine the current location in the date and time. Cards and find my mac are not also work more.

    Currently I have version 10.11.5 of El Capitan. It happened from one day to another, I don't update the software or anything like that.

    Thank you

    Edgar Lopes

    Turn on Wi - Fi for the information about the location.

  • How can I determine the version of Toshiba Assist?

    How can I determine the version of attribution that is installed on my Satellite X 200 with Windows Vista Premium SP 1AA. Operating system?

    Go to the control panel and start the option programs and features.
    After full load, you will find listed Toshiba Assist it.
    Click on it and on the bottom, you will find information about the version of publisher, size and product.

  • How can I determine the version UEFI implemented by the firmware of a PC?

    I found several ways to determine the version of the firmware/BIOS on a PC – for example mine is FRIEND v8.15 (05/02/2013).

    But is there anyway to determine which version of the UEFI is implemented by this firmware?

    I tried to find a description of the FRIEND v8.15 which maybe provided this information, but has not been successful.

    As a last resort, I considered as written to the company - but before that, any other ideas you have are appreciated.

    Hello

    Windows 7 doesn't support secure boot.  A lot of settings in the BIOS to do still get Windows 7 to boot UEFI mode as well as the support of compatibility (CSM) model in the BIOS offers the correct BIOS options.

    Frankly, I wouldn't buy a W7 PC delivered these days here as W10 is a great OS. If you have an application that proved not to be compatible with W10 then run it in compatibility mode.

    I've not seen many cases where different levels of BIOS are available for W7 or W8 and W10.  However, you might find instances where the BIOS runs only in UEFI mode.

  • I'm unable to determine the correct HP Quick Web access to fast Internet security key

    I am unable to determine the correct HP Quick Web access to fast Internet security key?

    Hello

    You need to contact HP support, their documentation online and ask in their forums than
    is not a problem of Windows or Microsoft.

    These should help:

    Install and use the Applications HP QuickWeb
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02043846&cc=us&LC=en&DLC=en

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Script to determine the versions of ESX hosts

    Hi all

    I ran a few basic using Power CLi reports & a few gui based ones, but im findning it is difficult to determine the versions of the host. That is to say, I have some hosts ESX and ESXi on the same number of version 4.0.0 is there a way to filter hosts that are running on ESX as im going through a process of upgrading all hosts to ESXi 4.1.

    Thanks in advance.

    Yes, use

    Get-VMHost | Select Name,@{N="Product; E={$_. Extensiondata.Config.Product.Name}}

  • OIM 11 g R2-code Client - JRF is unable to determine the current application

    Hello

    I'm asking a resource via an API by using the client program, I face below question when I run the client program:
    November 17, 2012 20:56:35 < clinit > oracle.iam.platform.context.ContextManager
    GRAVE: IAM-0030002
    oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
    at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
    to oracle.iam.platform.context.ContextManager. < clinit > (ContextManager.java:77)
    at oracle.iam.platformservice.api.ClientLoginSessionServiceDelegate.loginSessionCreated (unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    to Thor.API.Base.SecurityInvocationHandler$ 1.run(SecurityInvocationHandler.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (weblogicLoginSession.java:52)
    at Thor.API.Base.SecurityInvocationHandler.invoke (SecurityInvocationHandler.java:79)
    to $Proxy1.loginSessionCreated (Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.iam.platform.OIMClient.loginSessionCreated(OIMClient.java:291)
    at oracle.iam.platform.OIMClient.login(OIMClient.java:215)
    at oracle.iam.platform.OIMClient.login(OIMClient.java:197)
    to comp.iam.oim.client.Client. < init > (Client.java:37)
    to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:24)
    to comp.iam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
    at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
    Exception in thread "main" oracle.iam.platform.utils.NoSuchServiceException: java.lang.reflect.InvocationTargetException
    at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:279)
    at oracle.iam.platform.OIMClient.getService(OIMClient.java:256)
    to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:25)
    to compiam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
    at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
    Caused by: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:275)
    ... 4 more
    Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/indirection/ValueHolderInterface
    at java.lang.Class.forName0 (Native Method)
    at java.lang.Class.forName(Class.java:169)
    to $Proxy4. < clinit >(Unknown Source)
    at sun.reflect.GeneratedSerializationConstructorAccessor23.newInstance (unknown Source)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.io.ObjectStreamClass.newInstance(ObjectStreamClass.java:924)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1736)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
    at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:208)
    at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:599)
    at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:204)
    at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:243)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at weblogic.jndi.internal.ServerNamingNode_1036_WLStub.lookup (unknown Source)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:424)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    to org.springframework.jndi.JndiTemplate$ 1.doInContext(JndiTemplate.java:132)
    at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88)
    at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:130)
    at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:155)
    to oracle.iam.request.api.RequestServiceDelegate. < init >(Unknown Source)
    ... 9 more
    Caused by: java.lang.ClassNotFoundException: org.eclipse.persistence.indirection.ValueHolderInterface
    in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged (Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    ... 34 more
    Process has finished with exit code 1.



    Through a few forum with that said:
    https://CN.forums.Oracle.com/forums/thread.jspa?threadID=2432434

    But all of the code is not running (I can check that a few sys out is not getting printed) and that's why the request is not triggered in my case.

    Any assistance on this please.

    Thank you

    Make sure that you have all the pots in the class path: -.

    $Oracle_IDM1/server/clent/oimclient.zip, you get 4 pots: -.

    oimclient.jar
    Spring.jar
    EclipseLink.jar
    Common - logging.jar

    In addition, you have already wlfullclient.jar and jrf - api .jar

    You must have already established the system property: -DAPPSERVER_TYPE = wls

    Make sure you visit the following link: -.

    http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/APIs.htm#BCFCDJGJ

    Also, are you able to ping and telnet your IOM hostname from your Windows machine?

    Problem may be firewall etc...

    You said you use Console Design? From where? From your Windows machine or directly from the server UNIX using XMing or VNC etc?

    If you UNIX server, copy the folder designconsole on your Windows machine AND configure things in the xlclient.cmd...

    If you have found ways to NoSuchServiceException, it's the connectivity problem...

    In the etc/hosts file on your Windows machine, add the IP address of the machine of the IOM...

    This will definitely work...

    In addition, .bash_profile, I set the following environment variables... See if you're missing something: -.

    JAVA_HOME=/usr/java/JDK1.6.0_21
    MIDDLEWARE_HOME = / home/oracle/Oracle/Middleware
    WL_HOME = $MIDDLEWARE_HOME/wlserver_10.3
    ANT_HOME = $MIDDLEWARE_HOME/modules/org. Apache.ant_1.7.1
    $PATH = path: $HOME/bin: $JAVA_HOME/bin: $ANT_HOME/bin

  • How to determine the Version of the Oracle Identity Manager server?

    Friends,
    I have two questions about Identity Manager...?

    How to determine the Version of the OIM 11 g Server?
    How to determine the Version of the Server 9 IOM?



    Thank you

    The bundle of plates are observable by build number. If you go to metalink and check the patch bundle, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. What is written in XSD table during patching. Once installed, there is no identifier that says "applied BPXXX.

    -Kevin

  • Determine the version of Windows product key on the back "bricks" Lenovo laptop

    I bought a used Lenovo 6459CTO laptop. The sticker on the back windows is partially readable and windows was preinstalled, when the laptop was purchased. The system has failed and attempts to reinstall an image by the previous owner allowed to corrupt the Lenovo recovery Partition, so I can't boot up the laptop. I don't have the recovery disks. How can I determine what version of windows is on the laptop using the product key? The version of windows on the label is unreadable.

    You must contact the Lenovo Support and ask for help.  Please see: How to replace Microsoft software

  • Determine the version of the OS product key

    It is:

    Can the version [XP, Vista, WIN7, WIN8} of the OS, not the type (as in 32-bit or 64-bit), determined by the product key and if so, where to enter this product key?]

    I arbitrarily chose WIN7 version.

    No, you will need to have the specific edition and version installation files to install and activate using the product key.

    If Windows 7 is already installed and you are sure it's the right edition:

    Click Start, right click on computer

    Click on properties

    Scroll to the bottom of the window

    Click on change product key

    Enter the new product key.

    Click Start, right click on computer

    Click on properties

    Scroll down to Windows activation.

    You will notice it displays a time until Activation but completed. The product ID also indicates that he uses a default key, it is only for the 30-day grace period allowed until you have to activate Windows 7.

    Click the change product key link

    Enter the product key located on the COA sticker that is located downstairs or (sometimes in the battery of your laptop), you can also find it at the top or the side if it's a desktop computer.  It looks something like the following:

    Proceed to enter the product key and click Next

    Wait while Windows is trying to activate.

    If all goes well, less than a minute, you should see this screen.

  • Unable to determine the returned PID of launch.

    http://supportforums.BlackBerry.com/T5/native-development/4-language-application/TD-p/2719677

    After I implemented the lanbguage part, whenever I try to run my ap on device I get this error

    my file descriptor-bar

    
    
    http://www.qnx.com/schemas/application/1.0">
    
    
    
        
        com.netvariant.AlKhaliji
    
        
        
           Al Khaliji
           Al Khaliji
        
    
        
        1.0.0
        ar
    
        
        1
    
        
        
    
        
        
           AL Khaliji Mobile banking Application
           AL Khaliji Mobile banking Application
        
    
        
        
    
        
        Netvariant
        
           icon.png
           
              icon.png
           
        
        
           armle-v7
           AlKhaliji
        
        
           Qnx/Cascades
           armle-v7
           AlKhaliji.so
        
        
           armle-v7
           AlKhaliji
        
        
           x86
           AlKhaliji
        
    
        
        
    
        
            true
            none
            false
        
    
        
    
        assets
    
        
        
            
        
        icon.png
    
        
        run_native
        
    
    
    

    SOLVED

    http://208.74.204.192/T5/native-development/unable-to-determine-returned-PID-from-launch-when-runnin...

    But it looks like I found the solution!
    Just go to "Run" > "Run Configurations...". " on the tab 'Upload' in the 'Deployment' section select 'Install the app bar file' , then 'Apply' and 'Run'
    Do the same for the Configurations Debug...
    After that, I can running or debugging my application!

  • Determine the Version number

    Hello

    In the JDE, we can define the version number applications (by going into properties, then on Version :), I was wondering if there is a way to determine version number of the application that you programmatically entered here?)  There are classes that allow you to do this?

    Thank you

    Solved please use

    ApplicationDescriptor.currentApplicationDescriptor () .getVersion)

  • KWorld 399U tuner TV USB "unable to determine the configuration of the TV signal" Windows 7 Media Center (64-bit)

    I just upgraded my computer to Vista 64-bit for Windows 7 and am more able to use my USB from KWorld 399U tv tuner in Media Center.

    It worked fine on Vista, but after the upgrade, it asked me to set up my tv again signals. After that Media Center works "review of TV signals" for several minutes, it displays the message "Windows Media Center is unable to determine your TV signal configuration.

    I tried to download and install the latest drivers for Windows 7 http://uk.kworld-global.com/main/support_down.aspx?mnuid=1338&modid=22, but this does not make a difference.

    I drove my machine back to Windows Vista and the tuner works perfectly again, even after installing the latest drivers.

    Can anyone help?

    Thank you very much for your time.

    I had exactly this problem. My Setup has worked for weeks, then afer a RAM upgrade MC could get is more a signal of the usb U399. After a lot of noise, I uninstalled the driver from Device Manager, rebooted and windows prompted me to install a driver MSI... I tried this and it worked only!

    The KWorld Installer seems to be wrong.

    The location Windows driver is http://download1.msi.com/files/downloads/nb_drivers/tv/tv_mc810_9.603.1.0630_w700.zip

    Good luck.

  • Determine the version of Orchestrator from code?

    Thanks to some environments inherited, that we support, we have several versions of Orchestrator running in our environment. We run a common code base for all versions, so our workflows are the same on all instances of Orchestrator, but sometimes we need to run slightly different code on different versions of Orchestrator.

    The question is, is there a way I can tell from Orchestrator which version is running? Right now we run a local "hostname" command to get the name of the server Orchestrator and our decisions around that, but I wanted to know if there was a more graceful way / Dynamics to determine which versions. Is there something in the API or any object script that I can use for this information?

    Thank you!

    A GET request to the REST API:

    / VCO/API/about

    Sample of the output from my device:

    JSON:

    {
        "version": "6.0.2.2707387 (6.0.2.2700137)",
        "build-number": "2707387",
        "build-date": "20150428-1104",
        "api-version": "5.5.2"
    }
    

    XML:

    
    
        2707387
        20150428-1104
        6.0.2.2707387 (6.0.2.2700137)
        5.5.2
    
    
  • Determine the Version of InDesign (for equivalent javascript applescript)

    I have next to no knowledge of javascript, or where to go for help? I have an Applescript easy I want to convert it to javascript.

    For starters, anyone knows the equivalent following javascript code for this line of code:

    the version of the application 'com.adobe.InDesign' myVersion id value as string

    The other part of the script, I might be able to understand mine. Unless at some point given I have to find a PC user to provide the path to the folder 'en_US' of the InDesign preferences folder.

    With the help of a File.openDialog (); would get around not knowing the path hard-coded, but defeats the purpose and effectiveness of the script. I want the end user to be able to assign a shortcut to this script, which would open so all their files in InDesign library with a simple keyboard command.

    -Determine what version of InDesign, running as a string

    Tell application id "com.adobe.InDesign".

    activate

    the version of the application 'com.adobe.InDesign' myVersion id value as string

    -Display dialog myVersion

    If myVersion begins with '6' then

    myVersion set to "version 6.0".

    Otherwise, if myVersion begins with "7.0" then

    myVersion set to "Version 7.0".

    Otherwise, if myVersion begins with "7.5" then

    myVersion set to "Version 7.5.

    Otherwise, if myVersion begins with '8.' then

    myVersion set to "Version 8.0".

    Otherwise, if myVersion begins with '9.' then

    myVersion set to "Version 9.0.

    Otherwise, if myVersion begins with "10.0" then

    myVersion set to "version 10.0.

    Otherwise, if myVersion begins with "11.0" then

    myVersion set to "version 11.0.

    end if

    tell the end

    Tell application "Finder".

    Try

    the ((chemin d'accès àle dossier de l'utilisateur actuel en tant que texte Unicode) folder this_folder value & "Library: Preferences: Adobe InDesign:" & myVersion & ": en_US:Valpak_Libraries:")

    in case of error

    Tell application "SystemUIServer".

    activate

    display dialog "cannot find the VPLibraries file. Or maybe it's in the wrong place? "& return & return &" make sure all your libraries {files} reside in: "& return & return &" Admin > library > Preferences > Adobe InDesign > "& myVersion &" > en_US > Valpak_Libraries "buttons {"Cancel"} default button"Cancel"with icon stop

    tell the end

    try to end

    tell the end

    Set question to {'different'}

    Tell application id "com.adobe.InDesign".

    activate

    Repeat with i in this_folder

    Try

    i name the value theName

    If theName contains question then

    I opened

    end if

    try to end

    end repeat

    tell the end

    Hi Jeff,

    for ExtendScript (JavaScript), you can search for properties, values and functions etc.pp. here:

    Excellent documentation of DOM of Jongware. Go for chm files, if you want to search in offline mode:

    InDesign JavaScript help

    And by Gregor Fellenz DOM documentation:

    InDesign ExtendScript API (8.0)

    InDesign ExtendScript API (10.0)

    InDesign ExtendScript API (11.0)

    If you search for 'application', you'll notice, this is a 'version' "app" object property

    var myVersion = "version"+" "+parseFloat(app.version);
    alert(myVersion);
    

    No ifs and ifs remains necessary.

    Uwe

Maybe you are looking for

  • Mickey's face is not when we

    I have updated to iOS 3 watch and watch or the Mickey and Minney faces speak when we. I'm not I'm silent, alert volume volume is set to maximum and the rocker is set to tap function. I have removed and reinstalled the faces and have unpaired and repa

  • Satellite L30 won't start - error below messages

    Can anyone help please? I have a satellite L30 & out of no where it does not startbelow error. I entered the bios & checked initialize preferences (disk HARD, ETC.)but all I get is the message below. I also tried a system restore, but nothing. For re

  • Code capture

    Hai guyz, I'm having a problem with my code capture tool. After I install via VPIM, it does not appear in my tool tab. Y at - it a step that I jumped? Kind regardsNewbie92

  • How can I purchase Microsoft Flight without a credit card?

    Hi everyone I need help trying to get Microsoft Flight but I don't have a credit card! Can someone help me? original title: Microsoft Flight

  • 7.2 Windows

    my laptop was stolen, but I came back, but it has now a pirated version of windows 7, how can I get an iso I can put on it that will work with my product key?