HP ENVY M6-1106er: Windows 8 Pro hang up to begin after adding Hyper-V role

Similar Questions

• HP ENVY m6 1158ca: Windows 8 Pro Setup own activation fails 0xC004C003 blocked by OEM product key

  My hard drive died on my HP ENVY m6 1158ca.  I replaced and ran 6 discs recovery I created for my daughter and

  After the last completed album, I hit continue to do construction and each time after several reboots (ready devices... Prepares... ... Software administrator is installed) it would get the BSOD - 0xc000000f - a required device is not connected or not available.  SO I format the disk of 1 TB and do Factory reset again, and it still fails in the same way.

  After failing on several occasions, I've used a Windows DVD Pro 8 for another HP laptop and Windows 8 coming!

  However, the activation of Windows 8 needs a key I guess that the BIOS it will not work.

  Call Microsoft by using the "activate Windows by phone" gave rise to the statement "you must call OEM.

  to get a key and then call us back and then we can help you"

  The HP ENVY is out of warranty, who do I contact to get this key on the BIOS?  or the BIOS button does not work

  because the Windows 8 Pro does not correspond to something?  The laptop came originally with Windows 8.

  Thanks in advance for any help,

  Marlene

  Hi @ml88,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  The product key that is embedded in the BIOS may not work with the version of Windows 8 Pro.

  Here is a document HP-HP System Recovery troubleshooting (Windows 8) computers you can review. It can help restore the system from the recovery disks.

  If you need to get the recovery media:

  HP computers - get HP recovery disks or HP USB recovery disc

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• Windows 7 Pro hangs at startup except if connected to a network

  I recently installed Windows 7 Pro on a laptop HP 6735 b and successuflly active. It works fine until I have stop the laptop, remove the system and restart. It hangs at the windows logo and stays there forever. If I connect the cable network, he goes to the display of connection in a few seconds. However if I do not connect the network cable, it hangs forever. Not much use to me - an operating system on a laptop that works only if it is connected to my network.

  No go... I'm going to re - install from scratch, as I have no time to continue to troubleshoot. If he re-occours, I open a support ticket with Ms.

  THX

  Hello

  I contacted HP and determined that an upgrade of BIOS for HP 6735 b was required to correct this problem. Once the BIO upagrade was install I had no firther problem...

  HPQFlash for HP Notebook System BIOS (68GTT) - Microsoft Windows-Based

  Dave

• HP Envy m6-1125dx: HP Envy m6-1125dx Windows 7 Pro 64

  I really want to use Windows 7 64 with this laptop. I already bought a copy of Windows 7 Pro 64 bit retail and went through the installation on the laptop but I am not able to find drivers for it. Not even the network driver. Does anyone have pointers?

  Hello:

  You can use all the W7 x 64 drivers and software the m6t-1000.  Do not use the BIOS or firmware files well.

  http://support.HP.com/us-en/product/HP-Pavilion-M6-1000-entertainment-notebook-PC-series/5259226/model/5275636/drivers

• Windows XP Pro does not correctly load after the release of the Radeon graphics driver

  Hello

  I have a Shuttle XPC with Windows XP Pro and an ATI Radeon Sapphire graphics card. The entire system is 5-6 years, if that helps my raw description.

  My graphic card Radeon has had performance problems, so I downloaded ATI "autodetect tool" and he did choose the update of the driver concerned. After installation and reboot, my PC load Windows XP, but remains unused in ' grainy 8 colors low resolution version ' of my office. No icons, toolbar or whatever it is well visible. The mouse moves the pointer autour, but does not respond to clicks. The only combination of keys which gives anything is Ctrl + Alt + Delete, raise the usual options (in this case useless) to lock the computer, close the session, stop etc.

  In short, it seems that I'm not really on my desk, even if it loaded my wallpaper by default.

  'Safe mode' or "last working configuration" does not take me anywhere useful.

  How to contact with the system to at least start to change my settings for graphics cards?

  I thank very you much for any help.

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot

  Hello

  I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.
  Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?
  Long story short, after several relocations (refresh option), I've noticed as a result of behavior:
  1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.
  2. when I restart the computer and any time after that, is STOP WORKING.
  Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?
  It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).
  Help me please, since this is quite irritating :(

  Hello

  I finally found the problem.
  The invisibility of the active network has pushed me towards the answer.
  biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.
  By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.
  In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.
  Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!
  The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.
  This should be corrected, as it would be a great help in this scenario.
  TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story).

• Why don't Windows 8 Pro accept my key card (after installation)

  Hi, so I just install Windows 8 Pro on my Linux computer previously. It seems to work properly but I can't do certain tasks such as change my wallpaper screen and lock, etc. He said I need to 'enable Windows '. I went in the PC settings and click on "Activate Windows" and entered my product key, but he didn't accept it. How is it? She is authentic and I used it successfully to install Windows. So what is all this about activation of her?

  EDIT: This is a full version, by the way - not a upgrade key only.

  Try the phone activation:

  Press the Windows key + X , then clickrun, then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Windows 8 Pro key does not work after changing HARD drive

  I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).

  After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.

  The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).

  On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"

  Please suggest a solution to this problem.

  If my copy of Windows would have been an upgrade version, it would not have worked the first time.

  Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Activation of the phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Windows xp pro hangs during upgrade xp home to xp pro.

  This pc is not connected to the internet.  When the computer reboots, several times, xp a control will be meet all orders not recognize any disks.  No F8 or F10 results. Please help... db

  Hi ddburge and thanks for posting.

  If your XP Pro upgrade has failed and that you cannot access all features advances in start pressing F8 at startup and then our options are limited. Please make sure you have a backup of all your data before continuing a more far.

  After checking an option to save a good one that we have is a repair of XP installation. This will keep your system programs and files in tact however reinstall system files and the parts of the registry.

  Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

  1.	When the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
  2.	When you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to the Setup screen, press ENTER.
  3.	Do not choose the option to press R to use the Recovery Console.
  4.	In the Windows XP licensing agreement, press F8 to accept the license agreement.
  5.	Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  6.	Follow the instructions on the screen to complete the installation.

  Check out these articles in the Knowledge Base for more information about reinstalling Windows XP: How to: solve Windows XP Setup problems when you upgrade from Windows 98 or Windows Me.

  I hope this helps. Please report if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Envy H8-1534: Windows 7 Pro drivers for HP envy PC H8-1534

  So I had windows 7 on my computer as a year ago and I recently met with a pretty nasty malware and had to reinstall windows 7 on my computer drive. My problem is that I am having a hard time finding drivers for my computer. Ive found a support topic where someone else asked the same question but the solution given to them has not worked for me. If I could have a link to download the compatible drivers , it would be much appreciated. Thank you and have a nice rest of your day ok?

  Hello:

  You should be able to use all the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-HPE-H8-1200-desktop-PC-series/5187019/model/5231574

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro: crashes with white screen after login

  Dear community,

  I have an annoying bug with Windows 7 Professional (64-bit version) and could not find any problem even until that or other forums.

  After logging in (choose user and entering the password), the "Welcome" screen appears for a few seconds. Then there is a blank wallpaper (i.e. According to the user settings) and the system is blocked. Everything you see is a mouse cursor (a regular), who move, but not possible interaction.

  It does not work to get the Task Manager with CTRL-ALT-DEL in that State, and at least until 30 minutes just don't get past/changes. However, there is ongoing activity of hard disk, according to the LED. Only way out is to cut using the power switch.

  The accident happened exactly regularly, but about every start of the second. Sometimes more often (i.e. it takes 3 or 4 attempts to open a session) or sometimes less often (i.e. up to 3 or 4 boots without problem).

  Other than that, it is once you have successfully connected, the system works very well.

  I tried to remove the user and re-create it, but the bug reappears immediately after.

  Any ideas? Or advice where I could find what program/process is actually blocked?

  Hi Ruth & all,

  Thanks for your suggestions.

  Troubleshooting took a long time, because I do not use this PC every day and sometimes you can't tell if the problem is really gone or the boot just happened to work several times in a row...

  After all, using the clean boot and the reactivation of services/startup items one by one, it seems that I could single out the Internet of G-Data as a cause security suite. I'm trying to do, with their support, if this is a known bug.

  Best,

  Colin

• Windows Performance Index (WEI) is not available after adding more RAM and Win7 request reactivation.

  I have Win7 Home Premium 32 bit installed on new computer OEM. I added more RAM (DDR3 1333 pair). Windows has asked to be reactivated, I did. Now WEI has no active button, shows no rating at all and says that the machine is not classified. He previously worked. What was the cause? All solutions?

  Maybe Norton causes the same question. Have you tried to recalculate WEI after uninstalling Norton?
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Hyper-V on Windows 8 pro activation leads to the machine boot failure

  Hello

  I just updated my system Windows 8 pro. I try to activate the Hyper-V technology on my machine. Once I enabled the option, I wonder to reboot the machine. Although the machine cannot restart.

  My system configuration is as follows

  Name AMD A8 - 4500M
  Code-named Trinity
  Specification AMD A8 - 4500M APU with graphics Radeon (TM) HD
  Package of Socket FP2 (904)
  CPUID F.0.1

  Chipset
  -------------------------------------------------------------------------

  Northbridge AMD A55/A60M FCH Rev. 00
  A55/A60M Rev. AMD southbridge. 11

  Model of card mother 184 (0x000000DE - 0x000022C8)

  DMI BIOS
  seller Insyde
  version F.12
  day 30/08/2012
  ROM size 4096 KB

  System DMI information
  Manufacturer Hewlett-Packard
  product HP Pavilion Notebook PC g6
  version 088C 110000305910000610100
  series 5CD23760MS
  DMI Baseboard
  vendor Hewlett-Packard
  model 184 a
  review 57.2E
  series PCTXB012C2C4OE

  Let me know if you need more information.

  Kind regards

  Amish Trivedi

  Hello Amish,

  I just managed to fix exactly the same problem on my laptop HP 250 by updating the driver for my card Ralink Bluetooth 4.0.

  Here is a link for the driver:
  FTP://FTP.HP.com/pub/SoftPaq/sp59501-60000/sp59632

  Here is the link to the Forum for Discussion of HP:
  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/cannot-boot-if-HP-envy-BIOS-virtualization-enabled-for-WIN8/m-p/2538189#M22348

  I hope this help you too

  Kind regards
  RUSI Yordanov