HP Envy M6-1178sa USB 3 detects no not disks

Similar Questions

• Bluetooth not working not not on HP envy m6 1178sa

  Hello

  Bluetooth does not work on my laptop HP envy m6 1178sa running WIndows 8. The option does not appear in the wireless settings screen.

  All the troubleshooting it says ' USB - if xHCI host USB controller has a driver problem "and tried to reinstall the system, but not solved the problem."

  Help, please.

  Concerning

  Reni

  Hi ReniV, welcome to the Forums of HP. If the USB - if xHCI USB host controller port has a driver problem which could not be repaired automatically, try first to restore the Chipset from Intel using this method: use of the Recovery Manager to restore the software and drivers (Windows 8)
  
  That corrects the error, test your Bluetooth again. If it doesn't work, restore your Bluetooth drivers using the same method.
  
  Let me know how that turns out.

• HP Envy m6-1178sa restoration incomplete

  Model: HP ENVY m6-1178sa

  Product number: C2C18EA

  OS: Windows 8

  I was faced with a problem with my installation of Windows and it seemed to be a problem with "KERNELBASE.dll. I was told that I should be reformatting my laptop so I have, using the recovery partition (I pressed F11 at startup and chose the minimized System Image recovery).

  The recovery process seems to operate normally, but in the end that it connected me on one account labeled 'Administrator' and said that the restoration is incomplete. I opened the newspaper and everything was going well, apart from that:

  [RegistryDevicesCheck]

  Result = FAILURE

  DEVICE FAILED #0:

  Description: USB - IF xHCI USB Host Controller

  PNPDeviceID: ROOT\UOIP_BUS_DRIVER\0000

  Code                    :   [ 31 ]

  And then he said he ran the PININST (Mini-FBI) going on, and then it displays a list of log files that were the result of "SUCCESS."

  How to turn off the phone and restore it to its normal operating state?

  Press and hold the power button until the laptop turns off.

  Restart the laptop, press the F10 key to enter the BIOS. Change the year in the BIOS for 2012. Save & Exit. Try to begin again resumed by tapping the F11 key immediately after starting.

• to detect if the USB is connected or not in labview

  I want to detect if the USB is connected or not using labview

  Hello

  A simple method you can use to list out the folders on your computer.

  If no key USB is connected to your computer, you will get the name of pen drive.

  First download all the number of readers. Constant than this value if the next time with your USB drive, you get the number of elements is longer then one fixed, then you can say external peripheral is connected with the PC.

  

  Maybe this is not the standard method to detect the device, but it may solve your problem.

  Thanks and greetings

  Himanshu Goyal

• USB card reader does not detect memory cards

  memory card

  I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?

  Hello

  If you can't get the working card reader, you can use a card reader that is
  not expensive.

  -------------------------------------------------------------

  To check your version of Windows.

  Check with the manufacturer of system and their forums (if any) for known issues.

  Your other USB devices work?

  Try a system restore to before the drive stopped working if possible.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

• Manager uninstalled drivers and now front usb detect device not

  try to use life cam nx6000. CD did not went to the downloaded driver to internet Manager. then found download microsoft. uninstalled the driver manager and now the usb port before are not detecting the camera or ipod nothing.

  I ran the SFC / scannow, that's where the problem was detected, but like I said I am as far as I can go

  Respond to this request on audio, video, and motherboard and continue with the rest of the instructions.  In other words - skip the SFC/scannow (although where you got the original, I'm not sure.)

  As for the SFC/scannow...  Have you read through this article?
  http://support.Microsoft.com/kb/929833

  In particular, the part that starts with:
  "To determine which files can be repaired by the System File Checker tool, follow these steps:

  and continues with:
  "If the System File Checker tool cannot repair a file, follow these steps:

• Portege M400 - XP Setup cannot detect any HARD disk

  Hello world

  I have everything, what I can and can't try. During the Installation of Windows XP cannot detect any HARD disk.

  PORTEGE M400 PPM40E-0DG0253I
  BIOS 3.8

  Installation of Vista properly with RAID, but XP installation drivers won't work for all that. I try a lot of drivers (versions even for Vista), with integration of nLite, with SD-start 16-bit back, DriverPacks. I bought no change - disk-USB, the laptop cannot see HDD. I try also with the USB-SATA external enclosure, but this without success, but I can see the HARD drive

  Any ideas?

  Somehow you lack driver SATA.
  Very good description how to prepare the CD of facilities, you can find HERE.

  This Toshiba document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions please let us know.

  Good luck!

• HP Envy 7640: Wizard of the printer does not - HP Envy 7640 UDCString_UDCName error

  I am able to print, scan, copy and fax on my HP Envy 7640 printer very well.  However, when I click the icon HP Envy 7640 for the Printer Wizard just to check my ink level, for example, I get a script error.

  An error has occurred in the script on this page

  Online: 42

  Tank: 17

  Error: Unable to get the "UDCString_UDCName" reference to undefined property or null

  Code: 0

  URL: file:///C:/Program%20Files/hp/HP%20ENVY%207640%20series/Bin/HPSPProgress.hta

  Do you want to continue running scripts on this page?  YES NO

  Before I can even click on YES or NO, the screen changes to show the following. There is a yellow triangle with an exclamation mark next to this error:

  HP Printer Wizard

  Series\Bin\UDC_files/UDC_Main.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/tasks.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/URL.JSON HP HP ENVY 7640 C:\Program

  Series\Bin\UDC_files/localize_1033.JSON HP HP ENVY 7640 C:\Program

  When I click OK, I get:

  HP Printer Wizard

  Stop running this script?

  A script on this page slows down your web browser to run slowly. If it continues to run, your computer may become unresponsive.

  I connect to Internet through LAN.  My printer is connected to my pc through USB.  I do not use of wireless.

  I did not any changes to software or driver.

  I read through many solutions in this forum and tried several.  I disabled my firewall and antivirus first.  None of them have worked. I tried the SCLiteFix_299026.exe, the missing persons files difficult.  Did not work.  When I try to uninstall the printer and reinstall, I can't do that either.  I get error 2503 and 2502.

  I want to just my printer wizard to work and have been unable to find a solution.

  Maybe not all of these steps were necessary, but here's what I did and it worked! :

  (1) open HP Support Assistant icon on desktop.  It is a white question mark in a blue circle.

  (2) HP Support Assistant should show all HP devices.  Find your printer and click on UPDATES.  (Mine had no updates pending, but I clicked on UPDATE anyway)

  3) click on Diagnostics and tools

  4) click on HP print and Scan doctor.  Select your printer and click NEXT

  (5) you will get DIFFICULTY PRINTING and SCANNING of DIFFICULTY.  I chose the DIFFICULTY of ANALYSIS

  (6) when he finished, a screen opens and says "If you still have problems with your product, here are a few options for additional support.   Physically, I removed the printer cable to the USB port and choose "UNINSTALL AND REINSTALL with the latest version of the software".  I wasn't expecting to work, but he did.

  (7) I rebooted.  When my pc came, I began to other programs or applications.  I have disabled the firewall software and anti-virus temporarily.

  (8) I have re-inserted cable printer to a USB port

  (9) I open the HP Envy 7640 installation disc and click with the right button on the file: E7640x64.msi.  I clicked on install

  (10) software installed without error.  I then went to my office, clicks on the icon HP ENVY 7640 series... and VOILA!  My Printer Wizard now works!

  (11) I turned on my firewall and anti-virus back and I'm IN business

  Hope these instructions can help someone else.

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• SanDisk Cruzer Mini 512 MB USB Flash Drive is not recognized on Windows 7

  When I plug my USB drive inside fails to update the driver. Is there anyway that I can download the driver manually?

  Hello

  You meet other USB problems on this system. The Cruzer works on other computers?

  Check with SanDisk support because they have excellent online support, including live Chat and documentation.

  SanDisk - Support
  http://KB.SanDisk.com/app/home

  See also the appropriate bodies of SanDisk:

  SanDisk - Forums
  http://www.SanDisk.com/SanDisk-support/forums

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• Key USB Bootable Bootcamp could not be created

  Hello, I am trying to install windows 10, I downloaded the iso from microsofts website and already got bootcamp on my USB support software, I tried to install windows with iso 10 but it says "Usb bootable stick could not be created" then under it, he says that he only supports versions 7 or later version of windows , so I assumed it was my iso image, so I Re downloaded and it did not work, I did remove and eject my time of mutiple iso image, reboot, I thought maybe I should reinstall bootcamp but know too much what the problem is. Help, please!

  Hello hawkstrattus,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to install Windows 10 on your MacBook Air. From your post, I see you're under OS X Lion mountain. Windows 10 requires OS X Yosemite or later. You can upgrade your software on MacBook Air. The following article contains additional information about the system requirements:

  Use 10 Windows on your Mac with Boot Camp

  Best regards

• The installation disc (USB) boot camp is not found

  I'm trying to use Bootcamp to partition my hard drive and install Win10 on the partition (OS El Capitan). I followed all the instructions preparation using a blank 8 GB flash drive and bootcamp. I finished up to "Download the latest software from windows to apple support". "Install Windows 7 or later" is always checked. I hit continue and receive the following:

  

  The USB flash drive has not withdrawn, as Microsoft has been downloaded the ISO of WIN10. I did not make the score even.

  I have to do something to allow BootCamp to recognize the USB?

  On a Mac 2011 with an integrated optical drive, you must convert your Windows ISO on a physical DVD. A USB Installer is not supported.

• Satellite L50 - C - 1 L 2 - USB 3.0 does not work correctly

  Hi, the new Satellite L50 - C - 1 L 2 has maybe a problem of USB 3.0. All the componetens that I connect to USB 2 works correctly. But some of these plugged into USB 3 doesn't work. A driver from Microsoft for USB 3.0 extensible Hostcontrolller v 1.0 is installed, no more. I cannot find any USB 3.0 driver in collection of driver of Toshiba. What can I do? They are a special USB 3.0 driver?

  Greetings, Michael

  im not toshiba but tell me how you know that your usb sata 3 do not work, you should have a usb 2.0 port and two usb 3.0 ports, if you use the usb 2.0 to usb 3.0 port device you will get only 2.0 speeds. USB 3.0 is backward compatible with usb 2.0 even peripheral id usb 3.0 according to manufacturer and specs of the device and how to use it. lets say spec is of high quality and again then you transfer files small speed should be fast that belong to 3.0 speeds but if you transfer large files then your currency becomes warm or hot and gets corrupted performance speeds down you can even get up to usb 2.0 speed and maybe that's why you think that your USB 3.0 ports do not work correctly , I hope that its clear things that worry you.

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.