HP-Envy M6 - 1231ea - hardware-Overclocking

Similar Questions

• HP ENVY 17-j178nr TouchSmart: Overclocking HP Envy

  I have a HP Envy and I have a few questions about performance.

  • Is - this safe overclock the CPU (which is currently 2.5 GHz) at 3.0 GHz or higher safely?
  • Is this useful to overclocking?
  • How would I go about it overclocking safely?

  Here is my card

  

  I ran the HP product detection program and it was exactly the result:

  HP ENVY TouchSmart 17-j178nr Notebook PC (ENERGY STAR)

  The extra GHz.5 would go to the games. Here are the games that I play more often.

  • Grand Theft Auto 5 (small settings in all areas)
  • CSGO (moderate settings)
  • Heaven and Earth (all smaller settings out of the water, which is set to Ultra.)

  Thanks for your help,

  eZaF

  NOTE!

  IT IS A LAPTOP, IF YOU ARE NOT AWARE!

  Hello

  From my understanding, overclock in NOT an option on your machine with envy, he is locked in the BIOS.

  Kind regards.

• CCC for my HP Envy m6-1231ea

  Where can I download for my HP Envy CCC m6-1231ea lately because I had a lot of problems with the CCC and not being only unable to use switchable graphics that makes the fps on games I play fall dramatically. Please answer as soon as POSSIBLE, and it would be easier if you put a link in the answer aswell because I searched for a while on google...

  http://support.AMD.com/us/KbArticles/pages/AMDCatalyst13-5WINBetaDriver.aspx do not worry this is the thing I downloaded to be able to deliver my switchable graphics on Windows 8.1 Overview.

• Envy 17-j053ea hardware drivers.

  Hi people,

  I hope someone can help me. I just bought a new laptop, the HP Envy 17-j053ea and equipped with an SSD to it with Windows 7 Pro. I managed to find the drivers and make things more work, but there are still a few outstanding things that I can't get the right driver for.  When I go into the device, under the heading 'Other devices' Manager, I get the following list who still need driver. I'm going crazy trying to find the right ones. On the HP page I tried a couple that I found were for the ethernet device, but they have not worked, so I'm a bit lost now. Fortunately, I managed to get the WiFi working so at least I can still come on the internet and seek solutions etc.

  1. Ethernet Controller.

  2 PCI Device.

  3 SM Bus Device.

  4 unknown Device.

  5 unknown Device.

  Thank you very much

  Chad.

  Chad_1203 wrote:
  

  Hello

  Thanks for the quick response. Using your method I've now narrowed the list a bit. Two unknown devices are now gone. One of them had something to do with the 3D drivers and the other was the fingerprint reader. Not sure if they work as they should immediately, but they are now gone from the "unknown device". I have just the other three remaining.

  1. Ethernet Controller.

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1966103C & REV_0C, try this driver

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1966103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  2 PCI Device.

  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C & REV_01 use the driver on the portal of the web support for the Realtek PCIe card reader. The driver is for Windows 7 and Windows 8

  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C

  PCI\VEN_10EC & DEV_5227 & CC_FF0000

  PCI\VEN_10EC & DEV_5227 & CC_FF00

  3 SM Bus Controller.

  PCI\VEN_8086 & DEV_8C22 & SUBSYS_1966103C & REV_04 Get this driver from the Intel Center download. You have an Intel 8 series chipset

  PCI\VEN_8086 & DEV_8C22 & SUBSYS_1966103C

  PCI\VEN_8086 & DEV_8C22 & CC_0C0500

  PCI\VEN_8086 & DEV_8C22 & CC_0C05

  Kind regards

  Chad.

• HP Envy 17-j150ca: hardware HP Envy upgrade

  Hello world

  I had my HP Envy 17-j150ca for nearly two years not and as it has its problems, I love this laptop. Recently, he has worked much more slow and is has become a little too outdated to run newer programs. I suspect it is a problem with the hard drive and am looking for this purpose to be replaced by a new SSD to try to extend the life of my laptop. However, I am also curious to see the upgrade of some of the other equipment. I saw on the forum a lot of users have gotten responses mixed on the subject of their motherboards with a new replacement. My warranty has been flat for almost a year even after HP corrected the defect of fatal design of this laptop (vibration at the base of the opening and closing) so I am quite concerned about the warranty on my machine. Can replace components but if all else fails I'll just use it to replace the entire machine, so the loss of my laptop is not a problem. I have backups and CD installation for my OS as well so it's not a question.

  I understand that I may very well not had the answer I'd like to hear about it, but if anyone has information on how I could keep my laptop to update it would be much appreciated. I thank in advance for any answer, you can have for me.

  See you soon.

  Here is the Service Manual:

  Manual

  The motherboard is socketed and you could upgrade the processor to an i7-4900MQ, which would be updated niveau.4 ghz.

  You have the video of 740M from nVidia, and there is a motherboard that has video of 750M. You can install an SSD and a hard drive because it has 2 bays. Memory can be improved to 16 gigs. The top configuration with the best video processor and RAM and max and a main drive of SSD would still be quite formidable. However, the cost of obtaining it is roughly the same as a new equivalent laptop. And the most recent Skylake platform machines are something that you would have to try.

  Hard to call something with a 4th gen i7-4900MQ obsolete but I'm afraid that economy of the upgrade compared to new in this case is not favourable to the upgrade.

• On Envy 700-215xt hardware virtualization

  I would like to turn on hardware virtualization on my 700-215xt (running Windows 7 Home Premium) want. How to access this setting in the BIOS settings?

  In addition, several times when I turn on it goes directly to the Windows splash screen. What key of I hit to get into the BIOS? It's F12?

  Thank you very much.

  Carl

  Hi, Carl:

  These new PC normally you press the ESC key to access a menu of options.

  Once on this screen, you should then be able to select the BIOS F10 Setup menu to access the BIOS.

  Then see if the BIOS of your PC has the same settings as on the picture below to find out where to turn VT

  

• ENVY 17-K241NO: hardware upgrade on ENVY 17-K241NO

  Hi, I have an ENVY 17 - K241NO. I want to update my WIRELESS card and have an extra HARD drive.

  I'd like to update my current WIFI card (BCM43142 802. 11 b/g/n) Intel® Dual Band Wireless-AC 7260 more Bluetooth. I don't know how to check if this improvement would be possible?

  And I saw that some ENVY 17, may have a second HDD. Can my ENVY 17-K241NO cause a second HDD? Because I have two samsung 850 EVO in a raid 0 configuration.

  Thanks in advance

  Concerning

  Frederik

  Please see the "Maintenance and Service" Guides on http://support.hp.com/us-en/product/HP-ENVY-17-k200-Notebook-PC-series/7527536/model/7769455/manuals for the most comprehensive information on your issues. These guides seem to indicate that you can replace the WiFi card with processors Intel 7260 + BT, but it can be difficult to do. With respect to the 2nd HARD drive, there is no clear indication of your model to have 1 or 2 bays for HARD drives and disassembly will be required.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY Sleekbook 6 B5Q40UA: Overclocking HP Envy 6 with A6-4455 processor

  Hello and thank you for taking the time to read my post.

  I have HP Envy 6, 8 gb, 500 gb, 2.1/2.6ghz.

  I have been surfing on YouTube and found videos showing how to use AMD Overdrive.  I minimum it and followed the video instructions.  Now, I COULD raise the multiplier, BUT soon as I hit him save it back to original settings.  I also tried the Turbo in the Overdrive cmdlet.  Ditto Ditto... Really, I GUESS that since the app was AMD it would work.

  So, does anyone know how I can make this thing work?  I was in the bios and it is VERY limited.  I couldn't find something that could help with this at all.

  Thank you so much to help you could give me.

  I guess I'm looking for a way to unlock the bios so that I can actually made a change or two.

  MikeP.

  It's just not possible

• HP Envy m6-1231ea network driver does nothing after extraction

  Hello, during the installation of the drivers previously after they had been extracted usually something would happen but when I installed the network driver nothing was. I've done things like click on the driver I downloaded and watch it to extract again, rebooted my laptop, delete the drivier and reinstall, but I always get the same result. Is there something that can be done?

  Hello:

  If you do not see a network listed in the category other peripheral controller, this means that the wireless driver must be installed.

• HP Envy 700-215xt: hardware upgrade

  Hello

  I just wanted to know if there are restrictions on the upgrade of my 600w PSU and my graphics card for a GTX 980. I've been looking around and see some messages on Web sites saying that some HP computers are not extensible or use special connectors for their motherboards. Currently, I have a HP mother 2AF7. Thank you.

  You will need to research before you spent the $$$.

  Your system does support UEFI BIOS... investigation with this reference.  Most of the cards in the 700 and above are UEFI.  More reading about The UEFI BIOS.   The power supply is an ATX standard.  Nothjng for you to worry - about.  Corsair is an excellent brand.

• Catalyst AMD HP Envy m6-1231ea does not open

  "Catalyst Control Center cannot be started.

  Currently, there are some parameters that can be configured using Catalyst Control Center. »

  This is the message that appears when I click on it. Please help me as soon as possible because I can't use my switchable graphics.

  Don't worry, I managed to solve this problem by installing the CC again.

• Win Media Center - Dual Monitor mode makes both monitors blinking on and outside

  I have an EVGA nVidia 9500GT card (1 gig of video ram). The rest of the computer is: AMD 4-core 3.1 gig (OC to 2.6 GB) and 400 GB SATA. I use a card of receiver TV AVermedia Duo (2 tuners). I use "right-click" on the desktop, the screen resolution, to do which is to "Duplicate the poster" or "display on the desktop 2" and that causes WMC flashing both monitors, off, we off - never stops. " I use an s-video cable (6') to control the TV, which is an overhead projector TV Sony KP-61HS10. Sony's s - vid. entry. It was all work until WMC update itself appeared the prob...

  Hello

  This only happens if you change the resolution while Media Center is open?
  The problem if you close Media Center and reopen?

  Media Center is in windowed mode or full screen?

  Try pressing Alt + Enter or clicking on enlarge / restore button to switch between full screen and windowed mode.

  Are you referring to a Windows Update or the update of the guide in Media Center?

  Because the overclocked hardware can cause a lot of problems, I would recommend resetting hardware overclocked to default speeds.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade to Windows windows 8.1 8.1 Preview and lost all the software pre-loaded HP

  Hello, I lost all the pre-loaded software that came with my HP Envy m6-1231ea which includes beats audio, AMD CCC for my graphics switchable, software Cyberlink etc. Also, I can't do the thing that scans my finger so I can connect to my laptop without using my password, is there anyway you can help the user?

  Latest version of the software SimplePass (by fingerprint) is here:

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63224.exe

• Intel HD Graphics Driver installs

  Hi there I tried to install my graphic driver Intel HD on my HP Envy M6 1231ea but it won't. I downloaded several times, but he just has an X next to the installation and then said then. Help, please.

  Unless your laptop has the switchable graphics option, there is a good reason. The spectacle of Specifications for your laptop having an AMD Radeon HD 7670 M (2 GB dedicated DDR3 memory) installed by default.

  This requires an AMD graphics driver and would certainly explain why operatng system rejects your attempt to install a driver of Intel HD graphics.

  Description

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

• Strange game Lag

  Hi, I have problems with strange lag in games on my doalboot machine. I have Windows 7 Ultimate 64-bit and Windows XP 32-bit professional from my OS 2 - nd. Now, some recent games work better that old games on Win7.For Examle COD 4 MW is more offset than COD 4 MW3, more that the first is on the lower settings. COD 4 MW, trying to run on 1280 x 1024 75 Hz all low or off is MUCH more laggy than COD 4 MW 3 on 1920 x 1080 all settings at maximum. On Windows XP, COD 4 works better than in Windows 7, but at one time given time, the game crashes and continues to run, but lagging a lot more. The Ministry of HEALTH: Airborne, the accident caused all the textures get bugged. (in XP). Because COD 4 MW1 unraced since missing a .dll error early, I reinstalled Directx 9 .0c on the MS. Web site web installer The GPU is with latest drivers out yesterday and Geforce experience, which does not support XP. The Physx software is old because MOH: Airborne cannot run with latest Physx.

  My computer specs:

  Intel Core i3 3220 3.3 GHz

  8 GB DDR3 1600 MHz

  NVIDIA Geforce GT 610 2GB

  ASRock H61M-DGS

  2 TB HARD DRIVE

  Note: I have overcklock my GPU with Palit base - 810 MHZ and memory-535 MHz Core about Thundermaster 1006 and 603 Mhz memory.

  Note: I have overcklock my GPU with Palit base - 810 MHZ and memory-535 MHz Core about Thundermaster 1006 and 603 Mhz memory.

  Please turn off overclocking and check. It is recommended to not not any component hardware overclock without cooling solution appropriate (for example, to improve the cooling with coolant). Unless appropriate cooling solutions is deployed, overclocking questions, rather than increasing performance.