HP envy m6 w103dx: how to make new partitions?
The thing is that if I use the disk management software, it does allow me to have my desired partition size, if I do the partition during the installation of Windows and then I have to lose my OS and I read on the so pure support forum, I installed OS, I'd lose software recovery and content of the recovery partition is visible and they cannot be reinstalled.
So I'm always reluctant to do a clean install, because I don't really want to lose the recovery options, but don't really care about OS.
If you try to reduce the C partition and are not able to reduce beyond a certain point, this is often due to locked file - try turn off windows system restore to the C partition, reboot and then temporarily disable the pagefile.
I hope that you will now be able to reduce the partition to the size you require - once this done, re-enable the system restore and page file.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
How to make new tabs open to my homepage specified instead of the blank page?
How to make new tabs open to my homepage specified instead of the blank page?
You can do this by using an add-on such as:
- NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
- New tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way to open the home page in a new tab is in the Middle, click the home button in the navigation toolbar.
-
Hello!
I bought a new laptop m-70 of toshiba, I want to make new partitions on my drive hard if I delete the partitions and make new and install windows xp not from the recovery disk, will be to that effect the performance of my laptop or any effect on the guarantee
Can I delete all the partitions on my computer laptop is ok.Hello
You can install on your device, all you want, and it has no negative influence on the guarantee.
If the unit is pre-installed and configured right avoid all performance issues. Before you remove preinstalled operating system create the CD drivers and tools of fir trees. This CD can you use later to install all the drivers, tools and utilities.
Good luck!
-
How to make new tags and color change it
I would like to make new tags and change the color on the new tags, so I have a different color can you please help and tell me how it is done
It is what explains how new, but you can use these 7 colors.
-
How to make Vista partition on the HARD drive as first with recovery CD
Hello
I want to format and retrieve information from my 'Vista' (C: / /) partition, which is the first. But when I choose the option "Format and recover to a first partition on your hard disk (without RE) ' the computer began to recover in" Type of Partition: windows NT NTFS (ID: 07) "whose size is only 1.50 GB.
In the middle of the process, it shows not 'enough space on a disk.
Question: How to make a 'vista' first partition? What is 'the first partition' in the second formatting option and recover the system?
Thank you for your answersHello
Sorry, but you will not be able to do. I know it's a bad situation but if you use the first option that the whole HARD disk will be formatted and C new partition created. Second option, that you can not use at all. I tested it with my Satellite A100.
I called Toshiba and they said that Toshiba work on new recovery options and new notebooks will have the best recovery option. Something like old installation expert ghost mode.
I know it's wrong, but unfortunately there is nothing to do.
-
HP Pavilion 15-ab231na: how to make a Partition in windows 10
How do I partition my hard drive, I need 2 separate Partitions
How can I do it by myself
Follow this procedure:
1. search computer management in the search box on the taskbar.
2 - now, look in the menu on the left and deposited, there is disk management. Just click on disk management. Wait a few seconds for loading the disc information.
Now, right-click on the required disk you want to partition. For example, if you want to make a partition on the Local C drive, then right-click on it. Now click on Decrease of Volume.
3 - now, a message will be displayed are saying mark space. After that, in the next screen, you will get 3 Details.
In the first field, total size before shrink is written. (This is the current size of the Local disk)
In the 2nd field, the size of reduction in MB available space is written. It is the maximum size of the hard disk, you can create hard disk.
Now, the 3rd and the most important area is your field of decision, to put the size of the desired disc, in fact, given the maximum limit in the second field.
Note: These details are in MB. To get an idea in the UK, just divide it by 1000.
4 - now, when you have an idea about the size of the hard disk that you want to create, click button under film . Wait a few minutes. Please abstain you from any activity in the middle of this operation.
5 - now, the size that you specified in step 4 just creates the space unallocated on your PC. You must create a hard drive out of it and name it also.
Now, once the unallocated space appears as shown above, just make a right click on it and click on new simple volume. And will open a new Wizard of sample Volume.6 - now, in the next screen, simply specify the size of the hard drive. Click Next.
7 - on the next screen, choose the drive letter you want to name. You can choose any letter.
8 - file system choose from the next screen. NTFS is recommended, but you can also select FAT32 if you wish. In addition, change the new Volume and name it as you wish.
9 - on the next screen click on Finally, the finish for the finishing process.
Once you click on finish, it will take a few minutes to complete the process.
It is the best way to perform a Windows10Partition.
I hope that it helps.
Source: https://techyuga.com/easiest-way-to-perform-a-windows-10-partition/
-
How to make a partition in XP?
I'm doing a partition to remove all windows file so I can install Ubuntu I have 50 GB of free space and I was wondering how to make a new partition
* original title - to help to make a partition *.
Hi jagdryan,
You can see this article that should help you to create a new partition on the drive.
Microsoft Windows XP - create a partition or a logical drive
-
How to make a partition in Windows Vista (Satellite M200)
Hi guys,.
I * Toshiba Satellite M200 laptop *.
When I formatted my hard drive and try to re - install Windows vista by using the recovery disk.
I don't get how to do the partition on it.
If I followed the process right in front there is a single drive (C:\) I found at the end of the whole process.
I tried several times but could not get the solution for it.Can someone help me?
Thanks in advance.
Hello!
You can create partitions with Windows Vista Disk Manager.
It s not able to partition with the recovery disk, but you can do it with the Vista tool easy enough.Make a right click on my computer => manage-online Storage-online disk management
Then, you can create partitions how do you.By the way, here is an interesting article for you:
http://195.182.196.33/KB0/TSB7101OB0006R01.htmGood bye
-
How to make the partitions using the toshiba restore CD
Hi forum users. I just want to explain more on creating partitions using our Toshiba Recovery CD. I have a portable satellite A50-101.
I searched some topics on this forum and found this post from Quad. Just follow these steps carefully and you'll be successful to make the partitions on your hard drive.
Here is the message by Quad.
######################
Hi forum usersIf anyone of you needs an accurate description of installation of operating system using Expert mode, maybe this can help you.
When the recovery process has begun there are menu where you can choose between two modes of installation.
1 standard mode
2. expert modeAt first he put there important warning: all data stored on your computer will be lost. It is also important that hollow a Standard installation partition will be created and all data on the hard drive will be lost.
If you want to install the operating system on a partition, please use Expert mode. In this case, the software can be installed on an existing partition. Alternatively, you can make one by yourself.
If you want to make a partition with a set capacity, please do it on this path:
1. choose number 2 Expert mode pressing
2 approve OK key ENTER
3. choose LOCAL > DISK > image
4. look in: must be selected for the CD-ROM drive
In the Middle window choose GHO file and press ENTER
5. using the TAB key you must mark the player information and so on and press ENTER
6. using TAB button again part brand of window average (blue line) and with SPACE activate new dimension box
7. place inside the new size of the partition and press ENTER again
8. the question to continue with load disc? confirm with OKI hope this can help you to make the desired partition size.
Good bye
######################At step 6 above, enter the size of the partition you want. Size must be entered in megabytes (MB), gigabytes (GB). (mine is 40 GB HDD, i.e. 38146. I go to half, 19073)
Proceed with the disk load? Click OK.It will now recover your machine to its factory setting. 2 partitions will be made.
Once the restore is complete, open my computer. You'll see only drive Local (c) on hard drives. Click on properties and you will see that the size that you specified in step 6 above (20 GB). So, where's my other 20 GB? It is a way to treat 2 to make a new logical drive.
Follow this link: (these links has screenshots for easier understanding)
http://www.theeldergeek.com/hard_drives_07.htm - create an extended Partition (step 1)
http://www.theeldergeek.com/hard_drives_08.htm - create logical drives in an extended Partition. (Step 2)I hope this can help you make a new logical drive in an extended partition. :)
Hi 012
Thank you very much for your posting. I forgot to mention that the logical drive must be created because the unusable space do not appear by Windows.
But there are users like you to help. Respect!
Fashion Expert recovery procedure section is now perfect.Good bye
-
How to make the partition of Seagate backup so the Macbook Air?
I just bought a Macbook Air 13' 2015, I have a seagate external hard drive backup 1 TB plus all my files in it, coming from windows PC and I switch to Mac, when I try to make a partition in disk utility, I can't select an option for partition, its greyed, but I can read/write because of the Paragon for Mac OS driver I want just a partition on my mac with Time Machine backup, but I can't use my external drive for Time Machine it will erase everything on my external hard drive. Thank you
Unless you need to keep the Windows files you put on the disk and copied to the computer, then I suggest that you simply re - prepare the drive for use on Mac. Because the drive has been formatted on a Windows system you cannot partition via the Mac. But you can re-prep. disk using the partition scheme GUID for the two partitions and format of one of them for MS-DOS or ExFAT using Windows. But as I said earlier, if you do not need to use Windows and want to use for the backup on the Mac, then he prep exclusively for Mac. Use Time Machine backup requires a volume that is at least 2 or 3 times the capacity of the computer HARD drive.
Drive partition and format
- Open utility disk from the Applications\utilitaires folder.
- After disk utility charges select the drive (entrance Out-bumpy with of the mfgr.) ID and size) in the list to one side.
- Click on the Partition or delete tab in the toolbar utility of disc that is activated. If both are enabled, then choose clear.
- Adjustable circular diagram to set the number of partitions if you want more than one. Otherwise leave the default of one.
- In the Group dropdown set the GUID partition scheme. Define the type of Format Mac OS extended (journaled).
- Click on the apply button and wait for the fact button to activate.
- Quit disk utility.
[Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]
-
How to make a partition during the installation of ESXi 5.0
Dear Sir.
I want to install ESXi 5.0 on my HP compaq 6200MT machine, I have 2 500 GB HARD drives. Problem is I don't know how to create the partition and in what phase of the installation.
When I run Setup it does not give me any part where I should partition.
Moreover, I want to install ESXi 5.0 in the format below.
/ 5120 MB ext3
1600 MB swap
/ Home ext3 2048 MB
ext3/tmp 2048 MB
ext3/var 4096 MB
/ opt ext3 2048 MB
/ boot ext3 250 MB
vmkcore 100MB
Your help in this regard will be highly appreciated.
Thank you
Malik Adeel Imtiaz
The ESXi uses about 5 GB of disk space for internal use, the rest could be used for your virtual machines. Running a Microsoft Cluster virtual has many different conditions, but it might be possible to install in your situation (assuming of course that it is a test configuration). See this document for more information on the configuration of the "cluster-in-a-box", page 10:
-
How to make new tabs show my home page?
When I opened a new tab, I get tiles from sites I visit. I don't want that. When I open a new tab, I want to show my home page. How can I do this?
You can set the new tab page by entering "subject: config" in the address bar. Read the warning carefully, and once you are looking for the "browser.newtab.url" preference to proceed. Change its value to "subject: newtab" to the URL of the page you want to load.
-
I read the article to trigger the new tab on this link page
http://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-offI used some add ons like viewmark, King of the tab, fvd access. These add on have the possibility to load into a new tab and load them in a new tab can be disabled through their options
now I want to put my homepage as the new tab page, so he tried the solution provided above link but it doesn't work.
only a blank page is loaded while I try the two subject: newtab, about: Home (or home page url preference) by entering browser.newtab.url.
How to set the home page on new tab?When you set browser.newtab.url to about: Home (or the full URL of your desired home page) and then press Ctrl + t, you get a blank page? I wonder if one of your modules is the substitution of the page feature integrated new tab. Have you disabled or deleted ones you tried?
-
Satellite A200 PSAF3A - how to make new from the box
Hello
I would like to know is there anyway I could boot my laptop to make it new from the box.
His start-up is slow and must wait about 5 minutes until I can use it.I already have my recovery creator disc.
any suggestions?
Hello
> I would like to know is there anyway I could boot my laptop to make it new from the box.
It's simple companion
You must use the recovery disc.
The recovery disc will format the whole HARD disk and install just like the first day of purchase!Just boot from the recovery disc and follow the instructions on the screen.
Welcome them
-
How to make "new contacts" again in my contact list?
Suddenly last week, I lost the ability to make a new contact in the toolbar for Windows Calendar. When I clk 'contacts' now
Need me just to 'my computer' rather than show me a toolbar where I can take a 'new' contact. I can't make a new contact
while I'm in the place of 'my computer '. Thankx for any help you can give me.
Maybe you are looking for
-
Can I do a repair disk for my 10 boot camp windows installation?
I installed boot camp using the boot camp assistant and not from my own installation disc. It is provided in the boot camp assistant. Sometimes I can't start windows and getting a bad_pool_header error. I am asked to insert an ERD. How can I make
-
5.6.1 pages: How to create a table with more than 999 lines?
5.6.1 pages: How to create a table with more than 999 lines?
-
portfolio/keyboard XYBoard USB combo
I would like to find something similar for the combo keyboard/Mororala portfolio, with a usb keyboard so I can use it during air travel. Someone at - it recommendations?
-
Eror 25015 when you install Microsoft Fixit Center.
Originakl title: install fix it Center When you try to install the center patch, there is an error message it says "error 25015.failed to install the assembly ' c:\windows\microsoft\v2.0.50727\microsoft.» ' VisualBasic.Compatibility.dll'becouse of th
-
Creation of DVD Windows can't find the dvd burner
Hey, I have long used Director Windows and published my films through windows dvd creation, and programs have been working perfectly... but now I have a problem... When I get to the part where I want to make the movie, I can get the project ready and