HP ENVY notebook - m7-k211dx: Beats Audio

Similar Questions

• Series 500-700z HP Envy: envy 23 monitor with Beats Audio

  Hello

  Could someone explain to me what is Audio Beats?  There are controls on the bottom right of my screen for audio, to increase or decrease.  I was led to believe that the sound came across the screen somehow, but after that I put my computer, there is no sound until I plugged my own Dell speakers.

  When I bought the computer, I have not bought speakers because the seller has made me believe that the sound came across the screen.  I see the controls on the screen, but I have no idea what audio Beats is, or how it works, and if I needed speakers, someone should have sure I knew that, wouldn't you?

  Any information would be appreciated.

  Thank you

  Sandie Knapp

  Hi there @Sandielynne,
  
  Welcome to the Forums of HP Support! I understand that you are looking for more information on Beats Audio. I'm happy to help you with this.

  Please see the following: Beats Audio HP's: said

  As for sound, it really varies from one system to the other. There are some displays with built-in speakers, and others are not. In general if you're a fan of his, so it is best to get a good pair of speakers, as those usually included with computers and laptops is the basis.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion dv6 Notebook, Windows 7, Beats Audio. Audio output.

  Audio output on the helmet's "pulse" (increasing and decreasing volume).  Cannot say on the speakers.  All solutions?

  Hello

  Try to use Recovery Manager to reinstall the IDT HD Audio driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 7

  After reinstalling, restart the computer and see if it has improved the problem.

  Kind regards

  DP - K

• HP ENVY 14 t-3100 SPECTRUM CTO Notebook PC B2G97AV, beats audio controller works only on windows 8

  The button added to my laptop is no longer made anything and there is no way for my use the equilzer fighting for change my sounds. This can be corrected. HP will come out with something to be compatible with the windows 8?

  Hello lynden0648,

  Have you updated the BIOS for Windows 8? Have a look here http://goo.gl/iit3h for instructions on how to do it.

  Have a look here http://goo.gl/1Zb4W to download all the updates Windows 8 files updated for your laptop.

  Please let me know if it solves your problem.

• HP Envy Phoenix 810-130qe: Beats Audio Control Panel is missing after upgrade to Windows 10 anniversary

  OK I need help with my HP Envy Phoenix 810-130qe desktop computer. My pc came with Windows Pro 8.1 and it had an audio panel where you can set the audio beats. When Windows 10 came out I've upgraded to Pro 10 Windows and my control panel audio beats was still on my pc and worked very well. Then, when Windows 10 anniversary came out August 2 my pc automatically updated for the anniversary edition. Everything was normal, but my control panel audio beats had disappeared and I was able to find it anywhere. Do anyone knows how I can get it back or if there is no driver I can download to get it.

  Hello:

  If the W8.1 driver does not work, this W10 IDT audio driver should restore function Audio Beats.

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• HP ENVY m6: boots of Beats Audio drivers.

  How and where to download for my HP ENVY laptop drivers m6-1106er on the audio beats?

  Hello

  Download and install the IDT HD Audio software on the following link - this will also reinstall the graphic interface of beats.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• Desktop HP ENVY h8 - 1520t CTO: Beats Audio missing after 10 Windows Update

  If the Audio Beats Panel does not open. I find upward on the start menu and it said: "Windows is looking for IDTNC64.cpl. To locate the file yourself, click Browse. "How can I get that back?

  Hello:

  See if this W10 IDT audio driver works for you.  Install and reboot the PC...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• Envy 15: Loss of Beats Audio control panel after Windows 10 last updated

  Hello

  Does anyone know if the Panel Audio Beats will be available again?

  After the last update to Win 10 I lost the control panel and also my Bass speaker didn't work on the external speakers. Finally I sorted out the problem of speaker by selecting another driver in Device Manager.

  The most recent update to Win 10 was 1607.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• HP ENVY h8-1590ea: No Beats Audio after the upgrade to windows 10

  The pc came with windows 8 now upgraded to windows 10 and I lost audio beats he was there at the beginning, but did not completely gone now

  Hello:

  See if this W10 IDT audio driver works for you...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• HP Envy 15 t-j100: Beats Audio does not work after the new update of Windows 10?

  My laptop set to automatically update itself with the new update of windows 10, and after checking my laptop I discovered that the bat sign was gone and uninstalled in my pc. The sound from my laptop has no depth and clarity. Is there a way I could find a driver that has the bat inside Control Panel? Thank you.

  The softpaq driver audio Intel IDT next will install the audio driver and the control panel of beats.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

• HP envy ultrabook 6-1070el beats audio problem

  Hello

  I am running Windows 8 Pro 64 - bit on my new desire ultrabook 6-1070el, and I noticed that sometimes when I'm listening to something, beats speakers make a strange sound, so I tried to uninstall the IDT audio driver and the problem stopped, but now I lower quality sound... I also tried to reinstall the driver downloaded from the official site of hp, but the problem persists...

  Any help would be greatly appreciated!

  Hello AlleCaso,

  Please take a look at this document, which provides troubleshooting steps to use the Recovery Manager to restore your software and drivers.

  Please let me know if this can help resolve your sound problems.

  Good luck!

• HP envy 15 t-j000 Beats audio fluctuation and jump

  So, I recently bought this powerhouse of a machine and I love it.

  I have a problem, however, and it's a really annoying for me because I really enjoy listening to music m and use my cell phone as an audio source for my high end audio components.

  I have a 15 t touchsmart - j000 want I bought end of July and received in mid-August with the option audio beats.

  Since I first turned the computer the sound would ignore or fluctuate.
  I have observed the fluctuation when plugged into my stereo via the 3.5 mm headphone jack. It would sound like the volume would be lsightly fluctuate or may be missing some of the low-frequency end.

  The most noticeable problem is the jump. He will make a jump noise that sounds as if the computer is bogged down with the material, even when all that is done is reading. This looks like the frequency in the lines.
  It happens at random times in various circumstances. It occurs when playback of a music file but also listen to via spotify or pandora music or watching a video on youtube. The jump occurs under all these circumstances both the output to another source (headphones or speakers) as well as play through the built-in speakers.

  Is it possible that I'm mising one driver? The sound card is messed up? Is this just a problem with the computer? is there a fix that does not require to refer me to hp?

  I really need all the help I can get it starting to irritate me a lot and I don't want my warranty elapse before that I'm close to the question of fixing.

  It seems to have solved the problem

  That's how I went about the solution, if you can do it another way with the same end turn then the result for you!

  1 - go to the drivers for the HP support site and leave the site determine your pc model number.

  2 download the latest BIOS and IDT audio driver. Note where these files are saved.

  3. install the new BIOS and wat for the restart to finish.

  4. Remove IDT audio driver in Device Manager.

  5. install the new driver IDT and restart.

  Since then I have not had any jump or fluctuation.

  However, I had two cases where it makes the sound of crackling. But that's twice in four days, and I heard something that I don't need to hear three full days.

• hpPavilion notebook dv6 PC.beats audio High definition audio CODEC error (52)

  Can Hi anyone help me please?

  I have an audio problem, so you'll need to speak loudly! Laughing out loud. Volume on mute.

  HP Pavilion dv6 notebook PC.

  B3K20PA #ABG

  Windows 7

  stwrt64.sys version 6.10.6418.0

  Audio error CODEC high definition (52)

  Thank you

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56429.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Allow Windows to fully - charge it will automatically load an audio driver, but just let it finish.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• HP ENVY Notebook PC m6: no audio output to headphones

  Audio of the speaker works fine. Headset does not any audio signal. Speakers do not play when the headphones are connected, as they should.

  I couldn't find a page of official troubleshooting for this problem on Windows 10.

  Tried troubleshooting from another thread, and a hard reset seemed to have done the trick

• HP ENVY notebook - m7-k211dx: Synaptics ClickPad will not be disabled. Reactive after reboot.

  Whenever I have disable Synaptics ClickPad using the option 'disable the internal pointing device when external USB pointing device is attached', it works fine until I restart. When I return in the options, it is still once unchecked. I tried to turn off the drivers, but they are grey, but wan't to avoid this meathod ultimately because it is not ideal for me.

  Action taken:

  • Update to the latest drivers.
  • Disable the cache and history cleaning software.
  • Try different USB ports.

  (That's fine, but when I restart it unchecks itself)

  

  Thanks, Mike

  Mike,

  Sorry it took me awhile. I have all the "Nitty Gritty" details if you want, but the "net-net" is the update of this option writes in "HKCU" and there is a "HKLM" in the register which is default location and never changes.

  I managed to do that work by changing the corresponding section of HKLM in the registry. It not be "rejected" at each logon as the HKCU section seems to be. The ICON remained "hidden" which is what I wanted to happen with the change below.

  Try this and see if it works for you!

  1. open Regedit.exe

  2. go to the location next to the register:

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh

  3. Note the REG_DWORD value named - TrayIcon

  4. the numbers of data match this way:

  0 x 0000001 (1) DEFAULT = which is the active ICON

  0 x 0000011 (17) = animated ICON

  0 x 00000021 (33) = disabled ICON

  5. change it to what you have been wishing, in my case it was 21 Hex or Dec 33 for DISABLED ICON.

  6. exit Registry Editor

  7. restart to test or log-off/log-on to test.

  NOTE: If REG_DWORD is not here, it is probably safe to add it, but in my case it was already there it was just the value 1 and never changed when I changed the settings. Only the section HKCU did who has always retired at the end of my session when I disconnected or restarted.

  Let me know the results! I hope it suits it for you!

  Edward