HP ENVY Phoenix 860-000nd: cannot change bios Phoenix language - utility Configuration BIOS HP - HP ENVY 860-000nd

Hello

trying to change the language of the BIOS, the Bios HP Configuration utility, but get the error code 6 - access denied (failed due to permissions of the BIOS).

BIOS version is vA0.08 THI.

I can read (get) successfully, but cannot change any settings... tried to change other settings to no avail.

What Miss me? Should I first set a password?

Hi there @mucckki,

Welcome to the Forums of HP Support!  I understand that you want to change the BIOS language on your system in current Dutch English.  I'm happy to help you with this.

Was the Dutch language that the BIOS was set to out of the box or he later changed in Dutch?

If original default systems was English, you can try to look at the motherboard of your system guide. HP and Compaq Desktop PCs - specifications of the motherboard, Thimphu. At the bottom of the page is an indicator for the riders for the BIOS and CMOS password. If your default language was English, you can use the jumper to clear the current CMOS settings, including language.

Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

Tags: HP Desktops

Similar Questions

  • 700 - 147C envy: cannot change bios to boot from backup USB Acronis. Startup command problem

    I tried to boot from my USB Acronis boot device to clone my C: drive to another HARD drive, but I was unable to set the boot order (first USB) because it keeps resetting & put the USB back where it was before.  I've done this before without problem; I wanted to boot from an external USB Acronis rescue disk & run the procedure to clone of it. The USB is listed in the startup as list "Sandisk Cruzer 1.27 & it's the ISO boot Acronis on this file but I failed to get the pc to boot from it.» (not this time in any case). After a needless frustration 3 hours I ran successfully clone of C: drive procedure.  I checked the clone by disconnecting the source & boot from it, but it works "BOOT PXE ON IPV4 followed by PXE BOOT ON IPV6 before it starts the clone. The startup disk is listed before the lines of IPV in the bios then why what is happening?  I disabled the 2 procedures of IPV with F5 & now it starts normally, but I do not consider this problem solved, because I have not yet able to boot from USB & I don't know why I had to disable these 2 lines.

    Addendum: I revisited the right bios & reactivated 2 disabled lines & it is now booting properly, no nonsense IPV. Go figure.

    Help!

    Hello

    I've seen similar problems before.  I solved me my clearing the CMOS and then start with only a UEFI (the main HD) compatible device. After that the problem had gone away, I reconnected it and then my other active UEFI device.

  • to change the Polish language to English in windows 7

    I am shankar duct of the Nepal, I recently brought a lenovo laptop g550 of polland having windows 7 Edition home premium, but the language is Polish, which I can't understand so I want to change language to English. give me an idea about it. in the regional icons and time keyboard icon there is no option of installation/unstall why?

    I am shankar duct of the Nepal, I recently brought a lenovo laptop g550 of polland having windows 7 Edition home premium, but the language is Polish, which I can't understand so I want to change language to English. give me an idea about it. in the regional icons and time keyboard icon there is no option of installation/unstall why?

    Hey shankar duct

     
    as you windows 7 Home premium , you cannot change the display language
    you need windows 7 ultimate or windows 7 Enterprise to change the display language ofwindows 7

    Walter, the time zone traveller

  • Cannot change the incoming mail server. no text highlight

    I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

    Hi Granny Smith 1.

    Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:

    If you cannot send or receive e-mail on your Mac - Apple Support

    Kind regards.

  • Cannot change the Apple ID

    I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

    You cannot change the name of the device.

    Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

  • Good for laptop - cannot change the ISP; keep returning to a previous provider

    Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

    Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
    Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

    Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
    What Miss me?

    Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    This solve your problems? Please report to us!

  • Cannot change printers, reset failed.

    I cannot change my printer using Firefox. When I try to select another printer from the dropdown menu, the menu will close and I'm still on the printer I used. With the help of troubleshooting, I followed instructions to reset the printer. He failed. I have reset the default printer to a different printer through Windows 7 settings. He failed. I used followed Firefox instructions to reset Firefox (and lost my modules, thank you very much) and it failed. How can I get this printer working again the menu? For now, I'll have to use another browser whenever I want to use a different printer. Not good.

    Create a new profile as a test to see if your profile is the source of the problems.

    See creating a profile:

    If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem

    Profile backup and restore

  • You cannot change the settings of my Toshiba Power Management

    Cannot change settings in my power toshiba management section... can someone help me?

    Hi Matt

    I want to help you, but first of all, it would be very interesting to know the name of your unit.
    However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

    Good bye

  • I created a budget using models and cannot change it

    I created a budget using models and cannot change it.  When I open it I can't do anything with it!  I'm stupid or what?

    Like Emily Litella, Neve rmind!

  • Satellite A200 - cannot change the language on the CD OEM Toshiba

    Hoping to find help on how to change my Toshiba Satellite A200 language Spanish to English.

    I asked a friend to buy me this laptop to Spain, unknowing it OEM came Spanish language and the recovery CD is only as only Spanish but I do not understand Spanish and I was wrong to go on the laptop because I don't want to click on the wrong thing in Spanish.

    Even when I install programs, it automatically installs in Spanish and it's really frustrating.

    Someone HELP!

    Your laptop was purchased in Spain, and therefore the Vista operating system is also in the Spanish language.
    You cannot change it to English without buying a new drive for Microsoft Vista in English.

    In some cases, it would be possible to install a MUI (Multilanguage) package for Vista, but it works with Vista Edition full (and businesses?)

  • cannot change home page

    cannot change the homepage. moved and home page continues to last residence (router: 192.168.1.1). Now I want a different home page. I tried tools > use current > OK, but my old 192.168.1.1 comes back.

    See also http://kb.mozillazine.org/Preferences_not_saved and How to fix preferences that will not save

  • change my phone number and cannot change the keychain

    Dear,

    gently, I changed my phone number and cannot change the keychain

    You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

    City link below.

    • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

    Frequently asked questions about iCloud Keychain - Apple Support

  • Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

    As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

    Am also using Firefox 43.0.3 browser like Safari.

    'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

    You can ignore the above.

    Utility disk - permission errors, you can ignore

    System preferences/Date & Time/Date & time - is it set to automatically set the date and time?

  • Cannot change the Google search bar

    In Safari, I go to Google.com and do a google search. So far so good.

    Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

    I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

    Safari 9.0.2 (11601.3.9)

    OS X El Capitan 10.11.2

    Mac Mini (late 2014)

    A

    Please see below:

    Cannot change the Google search criteria in Safari

    B

    'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

    Please, back up all data before proceeding.

    Triple-click anywhere in the line below on this page to select this option:

    /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

    Right-click or Ctrl-click on the highlighted line and select

    Services ▹ reveal in Finder (or just to reveal)

    the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

    Repeat with this line:

    /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

    Restart the computer and empty the trash.

    You may also delete one or more of these elements in the same way:

    ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist
    ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist
    ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

    Never install "CleanMyMac" or something like that.

    * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  • USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

    USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

    Once again... Thanks for the tips...

Maybe you are looking for

  • Toshiba ciolour lcd TV problem

    I have a Toshiba LCD TV model 39 L D-2333 number 14K 06154 color has. This device no longer works correctly. It was bought from the supermarket Sainsburys in the United Kingdom and operate without problem for a little more than 12 months. He is now o

  • How can I remove the Place in my application of Photos?

    Hello, I come from Germany, my English is not so good, sorry: I'm using the new Apple Fotos App.  In some pictures, I give the Place name in the Drop Down field.  But now I'll use this field of Information. How can I remove this field? He returned ea

  • Equium A100-338 does not start the OS Vista - update Bios?

    Hi guys,. My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version

  • BlackBerry Z10 my blackberry seems dead

    Hi everyone, I'm new to the forum and very sad since yesterday my z10 BB unbootable. here what I do, my wife also have a z10 bb and I took my card sim of my test on my wife one. When I try to start my nothing as usual to happen, only a red light turn

  • How to create the default user interface is newly added to the columns in the table

    I added the new columns to the database table existed who got the default values for the user interface to the columns existed.How to create the default UI for the new columns.I couldn't see the newly added columns change the default UI (object brows