HP Envy Phoenix power connectors

Hello, I was just wondering since I don't have my HP ENVY Phoenix 810-145qe CTO desktop PC even if there will be some additional power connectors in the camera so I don't have to buy anything, I know that I need 3 to sata cables hd additional, anyone have this computer can tell me if there is & how it... Thank you...

TAAA, welcome to the forum.

Great choice of computer.  I have the 810-135qe Phoenix.  This is a very good for gaming.  I did it faster by adding an SSD.

Here is the page of Product Specifications .  If you look at the section "Berries", it shows that there are 2-5, 25 "and 3 - 3.5 drive bays".  For this reason, I am sure that there are additional power connectors.  I'll check my computer when I have the time to see how many are available and report back.

Tags: HP Desktops

Similar Questions

  • HP envy Phoenix: power supply question

    fact the hp envy Phoenix 810-430qe motherboard use standandard atx power supply connectors or connectors owners that I was told that it can use up to 900w but need to know for sure

    egaregolden12 wrote:

    fact the hp envy Phoenix 810-430qe motherboard use standandard atx power supply connectors or connectors owners that I was told that it can use up to 900w but need to know for sure

    Yes, it's a standard ATX PSU.  The description of the part for your current installed PSU is as follows: (746177-001) power supply - ATX, Picolit, IPS, 500W, EStar Bronze

  • HP ENVY PHOENIX CTO 810-135QE - 600 watts power supply Question

    In the near future, I would like to upgrade the video card in my desktop HP ENVY PHOENIX CTO 135QE-810 GT 640 default to something a little more powerful and I was wondering if there is any details about the default 600 watts power that will help me in my decision to the next video card.

    I know that some video cards require a number of amps on the 12 volt rail and all the information that I have found previously on the power of 600 watts power supply in the computer is not in that kind of detail.

    What I read, the power is a Petrus 600W e-star 5.0 Bronze, HP Part number 633186-002.

    Any additional details and details on this power to help me determine the next video card would be useful.

    On a side note the video card, I'm currently doing is one of the next Nvidia GTX 750 TI models, thoughts and recommendations on this specific map?

    Thank you

    JCOOPER2

    Hello

    Your PC has UEFI bios, so most video cards should work.  Some video cards will work in UEFI mode and others in legacy mode, that your PC is able to run.

    When the manufacturer of the video card and/or AMD or NVIDIA specify a minimum power supply size then it is best to stick to this recommendation.  Not all power supplies are built to the same standards of quality.  In addition the internal components, temperature, charges unknown and time that the PC will be placed under the maximum load are taken into account at the recommendation of minimum power supply is indicated.

    I have not seen a power of 500 watts with 12v rating of 18A, but this does not mean that there is not. And if that's the case, then the total power rating is suspect. A video card that requires an external auxiliary power connector will also draw power from the PCI-E slot.

    Are there cases where the minimum size of the power supply is insufficient? Yes, those who might be extreme but someone can have connected to power different connectors either to avoid buying a new power supply or maybe around just the food manufacturer minimum power rating. Some may do it thinking 'I'm going on fox the Fox ". It can work, but maybe the questions later start occurred.  I prefer to get the job done right the first time. You don't need a power supply to perhaps of overload and short circuit then internally causing spikes to the components in the PC.

  • HP ENVY PHOENIX 810-400no: block of POWER QUALITY

    Hi I have improved my GTX 770 to a GTX 980 TI and power works well, energy consumption is allmost the same, with 10 to 20 watts more than the GTX 770 and 300 watts of game and all the system maxed out pic is 360 watts... .then my quetsion is, what is the quality of my Lite-on 500 watts 80 bronze psu, built in the HP ENVY 810-400no PHOENIX... ?? HP no. 746177-001 and model No. PS-8501-1...? everyone tell me that it is of very poor quality, so im afraid to damage my $ 650 and all the things inside... I would greatly appreciate some peoples oppinions:

    Best regards from a very happy owner of HP

    Hello

    I used the HP OEM Delta 460 watt in my old e9280t for a couple of years and it was pretty good IMHO. However, when I installed a requiring greater graphics card several PCI-E power connectors 6 pin must be replaced.

  • HP ENVY Phoenix h9-1300 t CTO - replacement of power SUPPLY and GPU

    Hi all

    I bought my PC a couple of years ago and have been wanting to upgrade a little to the height.

    I'm looking to replace my Radeon HD 7770 and 600W PSU which is included in the PC with the following parts:

    Video card R9 sapphire Radeon 290 Tri - X 4 GB video card $379.99 @ Newegg

    Power supply EVGA SuperNOVA NEX 650W 80 + Gold Certified fully modular ATX power $59.99 @ Newegg

    What I need-

    Is there a guide to remove/replace these parts with this particular PC/case? Even the guide, I would like to know if it's important what part is replaced first.

    Shwop, welcome to the forum.

    This is the section addition / replacement the computer.  It has a guide for all components that you want to add or replace. including video card and PSU.

    The video card that you have chosen is not appropriate in the space provided.  You should go to the manufacturer's Web site to get the length.  You can make a model of the size of the card to see if it will fit.  Add at least an inch if the card has some additional power connectors.

    The power supply (PSU) should fit without any problem.  The computher uses a standard ATX PSU.  You can measure the existing PSU and compare the measurements to the one you choose.  Personally, I like Corsair PSU.  They are a little more expensive, but are amateur quality.  It will give you a good clean and stable power to operate the system.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • HP Envy Phoenix Deskto 810-160: HP Envy 3F6 Office Boot Error at power on

    I have a problem of problem with my desktop HP Envy Phoenix 810-160 to initialize.  1 TB HDD and SSD 16 GB.  Originally Windows 8 and put to update with 10 "free" Windows OS

    Back after a 13-day trip and got the hard drive error (3F0).  UEFI Diagnostics tests all passed several times.  After the passage of parameters of the BIOS back to default settings, error changed to 3F6.

    Whenever I start now, I almost immediately get the blue window Hard Drive Error (3F6). I hit F2 and go to the Diagnostics.  Ignore the coming out by... the computer starts - but very slowly.  Later works perfectly until I stopped him.  Takes a long minutes to finally stop (all lights out).  Computer is 30 months old.

    My 16GB SSD NO appears in Device Manager, but NOT in Solution Explorer.  In Windows 10 disk management, the SanDisk 16 GB SSD presents itself as shown in the red circle icon with an arrow pointing down, 14.9 GB, disk 2, unknown, uninitialized and 14.91 GB unallocated.  I thought it was supposed to be the startup disk 'rapid '.  I'm afraid to "initialize" this SSD lest I could format it and lose what is on it.

    Can you HELP me?  Don't you think that the SSD does not work as it should?  If it's the "Startup disk" How is that windows starts in all?  Uninstall physically the SSD drive would help?

    Thanks in advance, Bill

    Hi @dynaquest1,

    Thanks for the reply.

    Because the operating system is installed on the main hard drive and the PC works well. You can go ahead and install the player mSATA with no configuration is required.

    I hope this helps.

    Kind regards

  • No Audio - HP Envy Phoenix 810-145QE

    Not audio on the back or the upper connector, using the "Troubleshooting" of the message, it is that no device is connected. My headphone and line connection of the speakers work fine on my old HP computer. HDMI audio output does not work, but I really don't want to use this video out all the time. I tried to reinstall the driver, who was the same as this computer is less than a month. Why she even check to a device 'connected' to the audio output, that kind of thing is just a matter for additional problems.

    Hello BobinLA,

    I understand that you are having problems with audio in the upper rear connectors on your desktop HP ENVY Phoenix 810. In view of the new way in which this computer is I think it would be better if you contact HP Technical Support. This will ensure that your problems is not only dealt with, but a proper documentation.

    I want to thank you for display on the HP Forums. Have a great day!

  • HP Envy Phoenix 810-160: give up WiFi

    I have a HP Envy Phoenix 810-160 that I bought in April of 2014, it came with loaded Windows 8.1.  It has a Broadcom BCM4352HMP 801.11 ac 2 x 2 Wi - Fi adapter.  It maintains abandon the connection. I have install the driver is 6.30.223.170 from 09/06/2013, I tried updating the driver and it says my driver is up to date. When I go to the available networks list my network is listed under the power of the full signal.  It does not connect and says that it can't connect.   I turn on/off the device in Device Manager and reboot, then I get anywhere from two minutes to an hour or two of functionality so that it falls new.

    I'm going through HP and widows forums forums all day looking for a solution.  I followed all the troubleshooting steps I found on the HP and Windows forums, but none were specific to this model PC and a wireless adapter.   The only step I have not tried it replace the adapter.  computer 8 months, I want to buy a new card from the computer.  As it is connected to the internet from the computer, I received, it's only this morning December 26, 2014 that the connection has begun to wane.

    I tried to update the driver, uninstall and reinstall the adapter off the blue tooth adapter, currently if I toggle the device once in a relationship and reboot, I get a time where I stay logged in, but eventually, he abandons the connection again.

    When I turn on the computer the little indicator white wireless on the front of the computer lights up almost instantly.  I see my home network with the power of the full signal and two laptops and my Iphone right next to the computer to connect to the same network with full signal strength.

    Hello:

    This is the latest driver W8.1 I could find... 6.30.223.227

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-139598-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0002

  • Update drivers ATI HP Envy Phoenix H9-1350.

    Hello

    I just bought a Hp Envy Phoenix H9-1350.  I installed all of the update of windows it shows that I need, and in the DXDIAG, it shows the map as being a Radeon HD 7670.  The driver shows no version as I'm too used to the usual ATI cards and the driver date is listed as 21/09/2012.

    When I try to update the driver through the site Web of AMD, the driver will never install actually.  Even with the CCC.  When I go to the HP support website to download the drivers, I get the CCC, but the driver is not updated.  The time is always listed as 21/09/2012.

    Because the drivers are so old, the performance, I get in games isn't what needs to be had with the specifications of the system that the machine has.  The operating system that the computer is running is Windows 8.  How to update the graphics drivers in this machine?  I guess more accurately, I would install Catalyst 13.1, including the updated driver.  13.2 beta would be even better because that specifically improves the performance of Guild Wars 2 a little.  Any help would be appreciated.

    Hello:

    I know not which model you have PC, and what are the specs, and Yes, you could remove and replace the video card.

    I want to say is that since I don't have your model of PC or remotely, that affects to it (I only buy / use of Professional PC HP), I'm not able to confirm that install another video card (or a specific model of video card) is guaranteed to work in your model.

    What I'm saying, it's... I do not see why to remove the current Board and its replacement with one that works within the limits of the power supply, would not work.

    However, several times I read posts where people install video cards in various PC and for some reason, a certain model of video card will not work in this PC and I see no reason for this.  But it happens.

    You have to roll the dice and see what happens, or you can start a new thread and see if anyone knows what that specific video cards will work in your PC.

    I agree that risking $ 100 is a lot of $$$ on a bet.

    I installed video cards in a lot of PC, and that once it has failed to work (even if you have to).

  • HP ENVY Phoenix 810-445qe: specifications of need on 14.79 GB "Disk 1" labelled "Datadrive1 (e).

    I spent the last few days setting up a brand new HP ENVY Phoenix 810 - 445qe I ordered from HP.com. (Information system down in the case, it may be necessary.)

    I did what all the new owners of the system should do after you set up the system: I did a DVD repair system, and am about to do my first image with Windows 7 (64 bit) backup.

    Of course, when you perform an image backup (which is like making a photocopy of your hard drive to a point in time) you can not store this backup on the same drive you're imaging, for the obvious reason that you can not write to disk at the same time you are Imaging it. If the image backup dialog box gave me three options of storage location:

    (1) Datadrive1 (E)
    (2) WD MyBook external hard drive (G)
    (3) Blu - Ray / DVD / CD drive (F)

    I was curious about the "Datadrive1" because I didn't know that's where! I don't me read something about it, then I went to control panel > system and security > ' Create and format hard disk partitions "(under administrative tools on the system menu and security - or the type of management of the computer in the Start Menu) to take a look at the drives and partitions.

    This computer was said to come with a SATA 3 TB and because disk 0 is close to 3 TB, with a labeled 100 MB partition "EFI System Partition" a 2779,01 GB NTFS partition labeled "OS (C)" and an "HP RECOVERY (D)." 15,28 labeled GB NTFS partition So, there we have the bootloader partition, the partition of operating system Windows 7 and the HP recovery partition.

    But there is also a 'disc 1' labeled 'DATADRIVE1 (E)"formatted as one 14.79 GB NTFS partition. I was surprised to see this data disc, because one of my complaints about HP computers in the past (or at least those available through Best Buy) was that they were always set up with one disc for the operating system and data. (It is always a bad idea to host your data on the same drive that your operating system, because the system disks get use more heavy and are more prone to failure.)

    I recognized my Western Digital My Book 1 TB drive disc 2, entitled ' My Book (G) ' and formatted as a single partition NTFS of GB 931,48. It is the external drive only, I am informed, plugged into one of the USB 3.0 ports.

    So I called the support for questions on disk 1. Where is he? Is what kind of drive? Is what brand? Etc, etc. HP support officer did not know the answer to that! She told me that my system only comes with an internal hard drive and therefore that * must * be an external drive belonging to me. I have an external USB drive connected but it's G drive.

    The only USB devices connected physically are: dongle USB wireless keyboard and mouse from HP; My WD My Book drive; and a HP Photosmart C5180 all-in-One printer with nothing plugged into its card reader, who can't stand not anything on the order of 14.79 GB anyway.

    I would like to know the details about this DATADRIVE1, because) I don't really know what it is and if I should write data there and b) do not know how stable the device is. Thanks in advance for your help.

    ***************************************************

    System specs
    ---------------

    Computer: HP ENVY Phoenix 810-445qe desktop computer
    Operating system: Windows 7 Professional, 64 - bit
    Processor: Intel i7-4790 CPU with cache, etc.
    RAM: 32 GB (four connectors DIMM DDR3)
    Storage: (see below)
    Video: NVIDIA GtForce GT 640
    Audio: RealTek sound with Beats Audio card
    Network card: 802.11 b/g/n Dual-Band 2 x 2 wireless MIMO with Ethernet, Bluetooth (not out), etc.
    Keyboard & mouse: HP USB wireless keyboard and optical mouse

    Storage card
    ----------------

    System disk: HDD SATA 3 to with separate cache (Boot, OS, recovery partitions)
    Mystery disc: 14.79 GB NTFS (single partition)
    CD/DVD: Super Multi Blu-Ray/DVD/CD-Writer
    USB ports: 4 USB 3.0 and 4 USB 2.0 ports
    Card reader: 5-in-1 Multimedia Card Reader

    What is physically attached
    ------------------------------

    Video cable
    Dongle USB for HP Wireless keyboard & mouse
    USB cable for Western Digital 1 TB external hard drive
    USB cable for printer all-in-one HP Photosmart C5180
    Audio output to speakers

    Hello

    Look at least one "storage card" and you will see "separate cache. Which tells me that your PC may have a separate cache device (16 GB).  See the image below.  Check your motherboard for this device in the designated area.  What do you see?

  • HP ENVY Phoenix 810: Tiles and charms stop working

    Tiles and charms stop working. When the tiles stops working (by clicking tile on causes Office Office window to scroll) and I could still access the charm of the research, I ran sfc/scannow as administrator. He showed a couple of corrupt files, he couldn't fix, but on reboot, the tiles and the charms worked again. Have experienced this on four times at this point.

    Seems to have started with the last Windows 8.1 update and is somehow related to the engine OneDrive of synchronization.  I hadn't used onedrive; started using it, and this mess. I disabled all settings onedrive pc and laptop and stopped using it. However, the message "Synchronization engine OneDrive" appears for no apparent reason, and then the tiles and charms stop working.  If I have Outlook and Foxfire open apps, they still work, and their open windows always appear in the toolbar at the bottom. All other app shortcut links that have normally pinned it disappear.

    When I try to shut down the PC, if I can do this via the charm of power, I get a message that it cannot be closed because the "Portrait Display Inc. app prevents close.» There is no such program indicated in the list of installed programs in Control Panel. I understand computer Googling there somehow integrated in the HP PC.

    It is a HP Envy Phoenix 810, with a monitor (not touch) HP, both purchased December 2013. 8.1 Windows running automatic updates; using McAffee All - Access AV, up-to-date. Standard desktop applications. No software of Dingo.

    I see that many other people have had this problem, used the approach of the sfc/scannow, with little lasting effect.

    Plnjmw, welcome to the forum.

    If you have configured the Windows system restore, I suggest go back to a restore point before you started having the problem.  This will tell you if the update is the problem.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • How to add hard drive for HP Envy Phoenix 810-135qe CTO.

    My previous Pavalion motherboard failed and I ordered the current desktop.  I have the hard drive of the defective system.  He had the same operating system, windows 7, 64 bit, like this again.  I know some information about adding HDD to envy again.  No info on the motherboard or connections.  P5 and P6 power connectors are avilable for additional hard disks.  I see there are some open sata connectors on the motherboard, but need more info and direction on which one to use, or if things do, etc..  before I add the hard drive.

    Use any header open SATA on the motherboard that you want to use. As long as you don't make changes to the current boot order in the BIOS and save the changes, it will not count.

  • HP ENVY Phoenix 850se: HP ENVY Phoenix 850se - 500w is enough?

    I just ordered a 850se HP ENVY Phoenix since July 4 for sale and I'm excited the specs.   That said, I ran across a couple of calculators online 'power' supply and power seemed a little warm.  Is this correct or I'll get in trouble on the road with the 500w PSU included (which couldn't be upgraded).

    Follow the specifications:

    You'll be OK with the 500W provided for the system as specified.

  • Looking for info on HP ENVY Phoenix h9 SATA - 1400 t

    My search is narrowed down. I need to know one thing. It is SATA II or SATA III for HP ENVY Phoenix h9 - 1400t. It is customized with 8 64 windows.

    Here are the specifications of the card mother IPMMB-FM (Formosa) which is located in the desktop HP ENVY Phoenix h9 - 1400 t CTO. According to the specification, this model has two SATA3 6 Gbps and four SATA2/3 Gb/s ports.

    6 x SATA connectors (SATA 0-1 @ 6 Gb/s, SATA 3 Gb/s @ 2-5)

    Please send Bravo

  • Want to 810qe of Phoenix: upgrade graphics card on desktop HP Envy Phoenix 810qe

    If earlier I wanted a new Phoenix 810qe Desktop (windows version 8) with the following customizations: 4th gen Intel i7 - 4790 k @4.0 Ghz, 16 GB DDR3 - 1600 Mhz (2 DIMM), 2 TB 7200 RPM SATA Hard Drive, cache SSD 16 GB mSATA, HP WLAN 802.11 DB 2 x MCard BT WIDI 2 ac, 15 in 1 Multi Media Card Reader slot , 6 USB ports (front/back), Audio [before 4USB2.0, 2USB3.0 top of the page], 4 GB Nvidia GeForce GTX 745. I want to know if I could put in an Nvidia Geforce GTX 980 instead of the 745 GTX graphics card. Reading this post on the forum (http://h30434.www3.hp.com/t5/Desktop-Hardware/Upgrade-My-HP-ENVY-Phoenix-810qe-Desktop/td-p/4679014) I know that the computer has a power of 500w. But in the post, that it seemed that the person asking the question just had basic computer and had not adapted it, and I still have to wonder if the customization that I did for my computer took more watts of the PSU.  Now that I know that the GTX 980 would need 500 all the watts that my computer can offer that I want to know if my computer is perhaps still able to run this beast of a GPU. Anyone have any ideas? If this isn't the case, I think I can just settle for a Geforce GTX 960 because who needs to 400 w of total power of the system. But I'm not even sure that would work on my current computer either. Any help?

    Hello

    HP Partsurfer has the NVIDIA GTX 980 in stock.

Maybe you are looking for

  • Upgrading to Windows Server 2003 Standard Edition

    I buy a Satellite M30x and for work, install Windows Server 2003. But the two devices was not recognized (PORT COM, SERIAL PORT?), no driver has been found. Someone has an opinion to solve this problem. In Device Manager, there are 2 system device Ba

  • Firefox automatically fills the form data.

    I know how to clear my cache so that it does not load upward with the old email addresses, but I would like to know what it takes to stop while I fill out the forms each time. He can recall some sensitive information earlier and I would like this to

  • YouTube video screen size

    Not sure if this is the right place to ask, but I have a BDP-S480 and I was wondering if there was a way to change the size of the video screen to youtube. Currently, it takes just less than 25% of the size of the screen and it is too small to see, a

  • The svchost.exe file is damaged

    I had a virus on my computer, I installed the Mcafee antivirus, which seems to have found some viruses. However when I do a complete viruscan whenever the scan it gets the Svchost.exe file stops working, Mcafee contacted who informs me that the Svcho

  • Problem with the Microsoft Teredo Tunneling adapter.

    Appears in the device as Manager: Version 6.1.7600.16385 dated from 21/06/2006 but appears in C:\\Windows\System32\drivers\tunnel.sys (properties/details) as: Version 6.1.7601.17514 dated 11/20/2010 My computer cannot find the device and I can not pr