HP Envy printer 4500: poor/no wifi connection - I can't print wireless

Similar Questions

• BRAVO: Wifi connects but can't reach Internet

  Just recently my Wifi stopped working properly, anywhere except for home. The phone displays an active Wifi connection, but I can't get anywhere. It still works fine on my Wifi at home. I did not any changes to settings and it is always set to use DHCP to get an IP dynamic task. I tried to have the phone "forget" a network and it relearn, but which did not help. Any suggestions?

  Thank you - dcedte

  Deletion (aka. "forgetting") the unsecured Wifi networks 'remember' solves the problem. When the phone connects again to these networks, it works now.

  dcedte

• Iconia A1-830 has a Wifi connection problem when 3-5 meters

  I bought Asher Iconia A1-830 at BestBuy and after 10 days, I discovered the Wifi connection problem. If you stay near router (1-3 meters) the WiFi signal is good (not excellent). If I go into another room - Wifi connection is poor or disabled. I changed it to another (same model). The second model is perfect only 1.5 months and now she has the same problem with wifi connection. Can someone help me? Maybe the problem in my router, but why it worked 1.5 months?

  Yesterday, I received my return of repair Acer Iconia. They wrote the reason of the problem: reconnected hold of WiFi to the motherboard. It now works like new!

• Network WiFi connection is slow

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  I'm not sure what happens, but don't trust that I have "piggybackers" making use of my WiFi internet got slow.  Last week, I used a public WiFi for the first time.  Looks like others are have to work outside my network.

  I clicked on the icon of the internet bar and I saw 3 or 4 other users currently logged on.  Whenever I have uncheck automatically connect to them on what they come immediately disconnect.

  I've lost my privacy!

  Hi Regina,.

  I suggest you to enable protection of password for your WIFI connection.

  Secure your wireless network.

  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  You can also follow the steps in the link here.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-Internet-connection-so-slow

  You can contact your Internet service provider for assistance relating to password protection.

  Write to us if you are still having the problem. We will be happy to help you.

• ENVY 750-197c: still cannot successfully connect to wifi?

  Hello! I received my new desktop PC (a 750-197 c ENVY) probably about two weeks ago. Since then, I was not able to connect to wifi. The office came with Win 10 which I really didn't yet, so I went down to Win 8. After not being is not able to connect to wifi, I returned to win 10. I could not even connect. The connection attempt process seemed worst in 10 to win, because I have never managed to connect anytime, unlike Win 8 where I could connect perhaps at some super random time briefly for a minute I did my research and checked in high and low for the solutions to the problem. Convenience stores would often come with nothing, or some problems such as:

  • "'one or more network protocols are missing on this computer ' (only on 10 to win)"
  • "default gateway is not available" (On the two 10 Win & Win 8)

  After trying everything, including the netsh commands and update drivers, I was still not able to connect so I bought an external USB (Belkin N300) adapter to test things in case there was a problem with my computer built into the adapter (Intel(r) Dual Band Wireless-AC 3165). I also had to come back to Win 8 given that the new adapter is not compatible with Win 10. I noticed a difference after the installation of the USB adapter - wifi will be done 'connect' now and show 5 bars of signal strength. However, the connection is still not usable. I'll every few minutes or so get a yellow triangle on the network icon and after a repair I will no more no results or one of:

  • "default gateway is not available" (Which Windows will fix in the troubleshooter, but don't always give no internet)
  • "windows cannot communicate with the device or resource (primary DNS server).
  • "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Other times there a yellow triangle but once again, still not usable. I feel at this stage, there is a problem somewhere with perhaps the computer settings? Connect my internet real and router works fine. My other devices connect correctly, including my laptop in the same room with this desktop computer. I tried to reset my router, but it does not solve the problem. I checked that the adapter is configured to obtain the address IP and DNS server automatically, which is. I also tried the netsh commands

  Spoiler (Highlight to read)

  ipconfig/release
  ipconfig/all
  ipconfig/flushdns
  ipconfig / renew
  
  netsh int ip set dns
  netsh winsock reset

  /releaseipconfig ipconfig/all command /flushdns ipconfig ipconfig / renew netsh int ip set dns netsh winsock reset

  still nothing. I really need help to fix this and would be grateful for any help!

  Hi there @KianaLofton,

  Welcome to the Forums of HP Support!  I understand that, after the decommissioning of your system of Windows 8, you have had problems with the WiFi connection and probably the drivers.  I'm happy to help you with this.

  Looking at your previous posts, I feel that Wifi was working before the downgrade of the OS.  Did you by chance do plant a set of recovery discs for your system before moving on to Windows 8?  If this isn't the case, then you want to maybe get a game to the reference level of the system to the factory installation and see if it works again, then we can know that the issue is all about software and drivers, and there isn't an underlying hardware problem.  Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• do not print to the printer wireless network computers connected to wifi

  Don't know if I'm in the right Forum but here goes.  I work in a dealership service department. I have 4 computers connected to our network. I just bought a pro m426fdw mfp laserjet 4 in 1 ad printer connected to our wifi system because there is no available ethernet jack to connect to the main network. Is there a way to allow my 4 computers send information about this printer wireless?

  If you connected to your wireless network, and then run a report of network printer and find the ip address of the wireless connection. If you're in the list use to load the printer using add it printer, the local printer, create a port and the menu drop-down, choose standard tcp/ip and then follow the instructions on the screen. You can also try to load the disc that came with the printer and see if it will find the printer and load it for you.

• HP Envy 4500 to connect with the USB or wireless

  I just set up this printer on a wireless network to use with my laptop.  I would also like to set up a usb with my desktop computer connection.  Can I install the software on the desktop and then just pass to set up as a usb connection?  Did I meet access the printer wireless to my laptop?  Thanks for your advice.

  Hello AtlantaAH,

  Welcome to the Forums of HP Support!

  I understand that you want to install the 4500 want on your desktop via USB, and it's already setup on your laptop is connected via the wireless.

  You would be able to install the printer without problem on the desktop, as long as you plug the USB cable when prompted.

  The wireless connection, the laptop has the printer will not be changed either. Impression USB to a computer and wireless to others is a way to support the use of the printer.

  See you soon,.

• How to change preferences for HP envy printer 4500 using Google Chromebook HP pavilion 14

  I want to know how to change preferences for HP envy printer 4500 using Google Chromebook HP pavilion 14?

  Hi chefcorbin,

  Welcome to the HP Support forums.  I understand you want to learn how to change the printer using your Chromebook preferences.

  I've included a link to Google support to print a page with chrome and lists the print settings that you can adjust.

  Google Chrome Help Center - print a Page

• Canon MG6150 print using USB but no wifi. WiFi connection is OK

  Printer is connected to the network but is "not ready". If the printer is reinstalled then it's ready and will scan and the printer status screen is active but it freezes and will not print. Turn off and on again once there is a WIFI connection but printer is 'not ready' initially, it worked perfectly, but I used the USB for a job, and since then, I have had this problem.  I checked the firewall and this doesn't seem to be the problem.

  Sony VAIO VPC-EB1Z0E Windows 7 Extreme

  NETGEAR DGND-4000

  Any suggestions will be welcomed.

  Donald

  I just installed the latest driver for MP who cured the problem. Choose just the WIFI connection turned out to be the solution.

  A big thank you to anyone who was trying to help.

  Donald

• Envy 17 t-j000 Quad BIOS Update F.53 kills Intel WiFi Connection

  Yes - Fine-
  I had that problem licked in September (see my previous posts) - but this is my daughter - and after being hounded mercilessly by the HP "assistant" she inadvisedly updated its BIOS for F53.

  Thank YOU HP - you killed its WiFi connectivity - once AGAIN.

  I need to roll its BIOS to whatever it may BE in September 2013 - but the older BIOS is available online F43 January 2014 - I've seen as causing the death of WiFi complaints.

  Yes - we have the usual question Intel WiFi card - it IS now NOT EVEN SHOW UP in the Device Manager.

  I reapplied the Softpak mentioned in my previous note - No help.

  I went through the usual steps to re - identify a lost WiFi card:

  Unplug the computer, remove the battery, remove the WiFi card, disconnect the backup battery

  Wait 5 minutes

  Plug the computer and demarrer start upward, then closes down.

  Reinstall all components above and start back up

  NO JOY - no WiFi in Device Manager.

  So - Pleasie Pie let me know where I can find a copy of the BIOS that was available in September 2013 so that I can re - install that and hopefully recover its normal computer?

  I need the worm F.1c Insyde BIOS

  As usual - HP is not a clue.
  Although laptops I bought in the past seem to be great values - ALL have had fatal flaws
  Questions, MOST issues of BIOS and WiFi.
  Except the DV6000 - in which defective cooling system caused the video chip that is so hot, it melted ON the motherboard.

  The heat ALSO melted an internal cable - Fortunately, independent repair center was able to re-ball of the chip and replace the cable at a cost of $120.  I've been 2 months too late to get in on the action.

  Also, your BIOS WiFi Whitelist became a killer of the real deal.
  Fortunately - I got a copy of SP62444 - and used that to restore my system

  After THAT--I had to reinstall the INTEL driver for the wireless card.  The driver of HP down to work.

  -

  Computer laptop NEXT will be ASUS, ACER, Fujitsu

  I don't like NOT Sony, and as you can imagine, HP is now off my radar screen as well.

• BlackBerry Passport BB Passport - poor WIFI connection

  Nice day!

  I recently bought a passport of Arab Emirates BB UNITED. Service provider is Dug the device automatically updgraded OS for 10.3.1.1565 of the original version. However, both versions offer bad WIFI connection at home. When he is in the office, free WIFI is great! Both routers are DLink. I live in a studio, while the desktop is a good 3 times the size of my plate. How is it that the WIFI connection in the office is great, while at home barely connects on my device? I have no problems with connecting devices android and apple for the WIFI at home (including the smart TV and laptop i5). The WIFI problem is only with the passport of BB. The signal strength for the mobile network is ok. No problems with calls or mobile data connection.

  Can you please help and advise?

  Thanks in advance!

  What router are you using?

  I had the problem with some older routers at the office and I replaced with a

  Nighthawk AC1900 dual band wifi (R7000) NETGEAR Gigabit router

  now the whole place can see wifi as before when it was uneven with the old unit

• I can't print wirelessly on HP Envy

  I have a HP Envy 115, which will remain not connected to the network.  I've put it down to the printer being a bit old and grumpy, and bought a new 4500 want - and immediately I have the same problem - I turn on the printer, it connects to the network.  Wait five minutes, the printer is satisfied, it is still on the network, but if I try to print something - the system says that the printer is not found.

  I have an iMac, my wife has a macbook pro, we have an iphone 4S and 5s, the modem iPhone is a surfboard Extereme 6121 SB, the router is a Linksys E2500first gen (firmware is version 2.0) and we have Linksys RE1000 range extender.  The router firewall is disabled, so now that I have no idea as to what is the cause of the problem.  I'm thinking of what I found so far, this is a setting in the router somewhere - I'm not tech savy enough to know where.

  Any help to solve this problem will be greatly appreciated.

  Thank you.

  For anyone else who has this problem - move your RE1000 range Extenders.  I managed to move of mine that I always get covereage, but the printer is connected directly to the router.  Now, I have two fully functional printers...

• connect a printer wireless - need 2.4 ghz band of timecapsule

  Hello

  I am trying to print via WiFi wireless and my new printer says that it cannot connect to a 5 GHz signal.  It can only connect via 2.4 ghz.  Can configure my TimeCapsule for dual band?  While I can print wireless?

  I appreciate any help!  Thank you! Gracias!

  I am running the following:

  MacBook Pro (to 2011)

  El Capitan OSX 10.11

  TimeCapsule (to 2009)

  Printer: HP ENVY 4520

  Can configure my TimeCapsule for dual band?

  A Capsule of 2009 may or may not be a simultaneous dual-band model.  To find out what exactly what you might have, please look on the bottom of the time Capsule to locate the model number. Probably, it is integrated in the base of carpet of MOSS.

  The model number starts with an 'A' follow-up of four digits. Post back with number and we will continue.

• HP ENVY printer 4520: Download the software keeps freezing

  Try to download the printing HP ENVY 4520 for installation on my MacBook software.
  Download keeps freezing.

  Not a wifi connection problem.

  Hello
  Directly download and install the software below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-printer-Essentials-D-5_4_0.pkg

  Once open system preferences > Printers & Scanners and click on the plus sign to add your printer, be sure to select the printer model in the menu drop down.

  Then, install the HP Easy Scan on the Apple Mac Store application:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards
  Shlomi

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.