HP Envy Q005TX (J3Z15PA): HP Envy Q005TX video card information inconsistent memory

Similar Questions

• a video card with DDR2 memory will work with a motherboard with memory DDR

  What type of video cards will work in a SONY VIAO VGC-RA820G computer series

  Memory DDR ram & video card DDR 2 memory are both obsolete technologies...

  But yes they work very well, try to find a new card, more have DDR 3...

• error code 7f. "try changing video card", from physical memory dump, physical memory dump complete. can I reinstall windows xp with the CD?

  I have windows xp service pack 3. Internet explorer 8.

  Hello

  · What is the full error message that you receive?

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  See the link below: general causes errors "STOP 0x0000007F": http://support.microsoft.com/kb/137539

• SR2180NX adding memory and a video card, how?

  I finally decided to do a upgrade to my PC but I pushed my brain batty, trying to figure out how I would add memory and if I should update my video card now cause my Sims 2 game, instead of smooth running, it runs a little rough and frame by frame. Very annoying. I also want the Sims 3 to be able to run on my computer, I hope I can get it all done before they release.
  I have windows vista Home premium, and I have a PC I did not do anything for her, so it's a bit as if it was from the factory around a few programs of vanilla.
  
  * Manufacturer * Compaq Presario
  * Product * RK548AA-ABA SR2180NX
  Total number of logical CPUS * 2
  Total physical memory * 1.00 GB
  Total number of optical drives * 1
  Total number of disks hard * 1
  Total number of video cards * 1

  * Memory *.
  ------------------------------------------------------------------------------
  * System memory * total physical memory * 1.00 GB
  * Free physical memory * 443,21 MB
  Total virtual memory * 2.00 GB
  * Free up virtual memory * 1.94 GB
  * Page file space * 2.24 GB
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * Video card *.
  ------------------------------------------------------------------------------
  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation
  * Video card chip Type * Intel (R) 82945G Express Chipset Family
  * Video card memory * 256,00 MB
  * Video card BIOS * Intel video BIOS
  *Driver*c:\windows\system32\drivers\igdkmd32.sys
  * Version * 7.14.10.1461, 25/03/2008
  ------------------------------------------------------------------------------
  and it's the plug to run the Sims 3
  ------------------------------------------------------------------------------
  THE SIMS 3 MINIMUM REQUIRED HARDWARE CONFIGURATION
  
  FOR WINDOWS VISTA
  * Windows Vista (Service Pack 1)
  * 2.4 GHz P4 or equivalent
  * 1.5 GB OF RAM
  * At least 6.5 GB of disk space hard at least 1 GB additional space happy Custom
  * 128 MB video card with support for Pixel Shader 2.0
  
  For computers using built-in graphics chipsets, the game requires at least:
  * Intel Integrated Chipset, GMA X 3000 or more.
  * 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo or equivalent
  * 0.5 GB additional RAM
  
  SUPPORTED VIDEO CARDS
  NVIDIA GeForce series
  FX 5900, FX 5950
  6200, 6500, 6600, 6800,
  7200, 7300, 7600, 7800, 7900, 7950
  8400, 8500, 8600, 8800
  9600, 9800, GTX 260, GTX 280
  
  Series ATI Radeon™
  9500, 9600, 9800
  X 300, X 600, X 700, X 800, X 850
  X 1300, X 1600, X 1800, X 1900, X 1950
  2400, 2600, 2900
  3450, 3650, 3850, 3870,
  4850, 4870
  
  Intel® Extreme Graphics
  GMA X 3 x 00 series
  Laptop versions of these chipsets may work, but can run relatively slower. Autonomous cards installed in vanilla (not PCIe or PCIx or AGP) PCI slots, such as some GeForce FX variants, will perform badly. Intel chipsets integrated starring parts underclockes would not run properly.
  
  Chipsets integrated such as the ATI Xpress and the NVIDIA TurboCache variants will have low settings selected, but should operate satisfactorily.
  
  Please note that attempting to play the game using video hardware that is not listed above may result in reduced performance, graphical issues or make the game work do not at all.
  The NVIDIA GeForce FX series is unsupported under Vista.
  
  and he also said when I watched the news of the memory of the BIOS screen:
  
  Installed memory 1024 MB/PC2-4200
  Bank 1 512 MB/DDR2 SDRAM memory
  Memory Bank 2 not installed
  Memory bench 3 512 MB/DDR2 SDRAM
  Memory bench 4 not installed

  I know that I have to add memory and a video card, or even a power supply according to the video card, I get. Memory seems simple and easy to do, but the power SUPPLY and the video card, makes me a little nervous, any suggestions on what I should get and instructions on how to proceed will be greatly appreciated Thx! I apologize for this post being so long.

  Message edited by CareBear31 on 02/05/2009 13:02

  Adding instructions are here. When you buy new memory be sure and go to the website of the manufacturer of the memory. Use only brands so that they ensure th your product compatibility. Use the memory Configurator tools on the website of the manufacturer of the memory. Here are a few major brands for you: Kingston, Crucial, Corsair:

  Change the power supply: This video on youtube is pretty decent for generic power supply switching.

  Thislinkhas information on opening the cover and remove the cover.

  When you select a video card do not get cards great physically (i.e. ATI HD 4870 / 4850) because they are double wide and does not have limited space. Fantastic cards but are not for the pre-built PC.

  Any ATX PSU fits your case. 450 watts or therabouts enough for almost any addition of hardware on your pc. Do yourself a favor and stick the best brands such as Corsair, OCZ and others. Generic brands are not worth the problems they can bring even if they are cheaper.

• HP Envy H9 Phoenix - update video card?

  Hi all

  I have a HP Envy Phoenix H9 PC with a pcie Ati radeon graphics card. I'm looking to upgrade, however, when I bought a nvidiagtx660 and placed in the pc, the screen was empty and could not find the signal. This video card works in my other pc so im wondering if my computer cannot return this card? Any help would be highly appreciated.

  Thank you.

  Jon, welcome to the forum.

  Here is a guide that you should read before you install the new video card.  If the new card is not compatible Secure Boot, you will need to disable it for the card to function properly.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy 700-200z: video card for want 700-200z

  Hello, I want to add a video card to my desktop 700-200z envy, which came with a single integrated graphics card. This is for video editing, and I just need a card modestly price such as the NVIDIA GeForce GT720, as long as it has open CL or CUDA. The GT720 will work with my motherboard? Thank you.

  Hi George,.

  The NVIDIA 720 is a video card very low end.  You might be better to use the NVIDIA GT 730 for $79.

  Review of the HP articles below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• Video card for laptop HP ENVY TouchSmart 15-jo67cl

  Hi, I have TouchSmart HP ENVY 15-jo67cl Notebook may not open the games like PES 14, so I want to replace the video card by appropriate. I have the Intel HD 4600 graphics card with up to 1792 MB graphic memory total, I want to replace it with Nvidia or adapted. what I can? Assistance please

  Hello

  Like many, many, many laptops, replace the video card is not practical to impposible. For your machine: impossible to replace. If you want to play modern games, buy a new machine for games:

  http://www.digitaltrends.com/best-gaming-laptops/

  http://www.notebookcheck.NET/notebookcheck-s-top-10-gaming-notebooks.98628.0.html

  Kind regards.

• Add HD 4850 video card in HP Envy 700-215xt

  I want to add a Radeon HD 4850 HD-485 X-ZNFC video card in HP Envy 700-215xt (model: F9A62AV) whose video card (Intel HD Graphics, DVI - D graph) is too poor to run Samsung monitor (24in).  HD 4850 videocard needs connector 6 pin power, but I can't find the power connector or cable. What should I do?

  The PSU minimum power, with a PCIe power connector 6-pin requirement is 450 watts.

  Your PC has a 300 Watt POWER supply. Is not enough power for the XFX video card.

  You must also upgrade the PSU to intensify your graphics card for a XFX HD4850 video card.

  If you are unable to get a graphical output on the 24-inch display, then it is likely to be a problem with the display or the cable.  You may not be the entry configured to automatically recognize a video signal. You can test that by connecting the original display. If you get a video output to the original display there is nothing wrong with the motherboard or the CPU. Intel HD4600 graphics are provided by the CPU, not a graphics card.

• Dv6 - Possible update video card envy?

  I searched a bit, and I realize that it is probably the best place to ask. I have a beautiful laptop dv6 of HP ENVY with a NVidia GeForce 650 M GPU, and I'm looking into the possible upgrade.

  Since there is a GPU integrated as well as a secondary GPU, other forums suggest that a GPU upgrade is possible. Has anyone successfully upgraded their ENVY laptop GPU?

  I'm hoping to switch to the GeForce GTX 700 series.

  Thank you

  -Matt

  Hello

  First of all there is no way you can put a GeForce GTX 700 series physically on your computer. Second, you could find a more powerful video card suits, should be considered:

  (a) heat: the map will be warmer, you must change the fans inside.

  (b) power: the existing charger may not work.

  (c) cost performance: $$$ / value

  Kind regards.

• HP Envy & 00-147 C: 4 GB new RX 480 video card update

  Hello

  I want to upgrade my current computer with this new video card, the RX 480 (http://www.microcenter.com/product/466870/Radeon_RX_480_4GB_GDDR5_PCIe_Video_Card)

  I would like to know if it is compatible and which parts of the computer I need to perform this task.

  My profile: http://support.hp.com/us-en/document/c03933886

  Thanks for your help

  @MagicToast, welcome to the forum.

  I think that the card will be compatible with your motherboard.  It will be a tight fit, but if you do a few cables, it should be good.  However, you need to upgrade your power supply unit (PSU) at least 600 w.  The card requires at least 500W runs correctly.  I love Corsair products.  If you buy a modular PSU it will allow you to use only the cables that are absolutely necessary to allow better flow of air.  A more powerful card will create more heat.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• The HP ENVY h8-1500z with a new video card upgrade

  Hello

  My current video card is a 1 GB of Nvidia that came with the installer and requires more power.  I want to upgrade the video card for this (http://www.newegg.com/Product/Product.aspx?Item=N82E16814131562) this map requires power and this kind of care.

  

  I opened my PC and it looks like the current power is 300W, but I do not see a card for a video about this card. My question is: Y at - it sort of an adapter I can use with existing PS? If I need to exchange the PS, can I use any power supply in this PC? It will be (http://www.newegg.com/Product/Product.aspx?Item=N82E16817139050) to adapt and work? If not, what suggestions do you have?

  Thanks for the help.

  Wanted to add that I am running:

  6-core AMD FX 6120 to 3.50 Ghz

  14 GB of RAM

  64-bit OS Win Pro 8.1

  NVidia GeForce GT 620

  The graphics card, you want to install on your computer requires a minimum of 500 watts power. The Corsair CX500M that you access will work for your computer and work with your desired graphics card.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Want to 700-019 H5P24AA #BL: what is the side power maxiumum supported for a video card in Envy 700

  I want to improve my HD 8570 delivered installed video card.

  What is the rated power more of a video card that would work with the installed 450W power supply.

  CPU is 4770 I7 motherboard: MS-7826 (Kaili)

  Thank you

  The 700 WANT referenced has a 460 watt POWER supply with a PCI-E 6-pin power supply.  In addition, this particular model PC has a version 8 for most graphics cards latest UEFI BIOS which are rated to work with a 460 Watt power supply would probably work.

  Of EVGA has a NVIDIA GTX 960 modelthat requires only a single PCI-E power connector 6-pin. Other models of the EVGA GTX 960 graphics cards require a PCI-E power connector, 8 pins.

• Problem upgrading the h8-1409 HP Envy video card problem

  Hello.

  I just bought this machine and it has a good processor and ram good, but it comes with a card missing video (HD7570).  I want to upgrade the video card at one of the best maps I have of my old machines (Gigabyte GTX 660 ti and an Evga GTS 250).  When I install one of these cards but, I get no video output.  I can hear the initialization of the system and the hard drive works, so everything seems fine here.

  This machine comes with a 460W power supply, which should be enough to run one of these cards, but no go.  In order to exclude food, I tried on a secondary market, OCZ 600W PSU, but got the same result.  Two cards work in my old machine, so I know that the cards are good.

  The specifications of the main Board are here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03132942

  As far as I know, it should work.  Is there something I'm missing?

  Thank you very much.

  Hello

  Only use one video card in your PC and make sure that it is installed in the PCI-E x 16 slot.

  Boot in the bios (ESC and F10) and go to security topics. Try each of the topics and search a secure Boot Configuration.  If it exists, then see if Secure Boot is disabled.  A poster said that secure boot disabling enabled the installed video card. I have not tried this on a HP active UEFI motherboard but I know that it isn't a problem with another mother UEFI card that I use.  Your mileage may vary.

• Impossible to upgrade the video card on 810-109 Phoenix Envy

  I bought a new desktop computer (810-109 Phoenix) and wanted to upgrade the video card. The new video card is a Zotac GTX 660. The thing is that the system does not boot with the new video card. I got continuous beeps from the system. I used 6 PCI-E power connector pins. The power suply is expected to support the video card, as it is listed as 600W and it is the wat recommended for the video card. I am runing Windows 8.1 64bits.

  Help, please.

  Hello:

  When you add a video card no HP in a PC provided with W8/8.1, you will need to change 2 settings of the BIOS before installing the card.

  Please read the info on the link below and hopefully that will solve the problem for you.

  http://support.HP.com/us-en/document/c03653200

• HP Envy 750-177C: update video card and power supply

  Hi I was wondering if anyone has any suggestions on a 2 GB video card that can fit in my camera, and if the power supply must also be of a certain type, thank you.

  @Docta1, welcome to the forum.

  Here is a video card that will definitely work with your computer.

  The power supply unit (PSU) in the computer is stanard ATX.  I love Corsair products and recommend at least 600W.   A modular power supply is good for small boxes.  It allows you to use only the cables that are absolutely necessary.  This allows for better air circulation.  The video in my link card requires a connector 6 extra pins.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.