HP ENVY spectrum XT Ultrabook: Drive failed in the short DST test

Similar Questions

• HP s5-1554, H3L78AA #ABA: ID to fail the short DST hard drive: 90D9UC-0007NVWPWWWJ-60SU03

  The computer was really slow so I tried to run VIPRE, but the computer was literally too slow for me to actually launch the scan. So I turned off and left for a while. So now she's stupid auto repair loop where I can actually use the computer. It was not yet let me into Safe Mode.

  Then I ran the tests for diagnosis of HP UEFI and abbreviated Hard Drive DST Check failed, as the long version and tests components. All the tests no - drive past. Is the ID of the fault: 90D9UC-0007NV-WPWWWJ-60SU03. I couldn't find anything that matched this code, so I have no idea what it means.

  I guess that means that the hard drive is faulty / failed, but I was wondering if there is anyway (not too hard) to solve this problem?

  (A) will be a system Recovory or refresh to solve this problem?

  (B) is there a way to get these files off the hard drive?

  (C) I have to buy a hard drive and do everything myself because apparantely warranty of 1 year expired in 2014? If so, any good reccomendations walk and easy...

  (D) is not really at the beginning to a hard drive failure, especially when the person barely uses the computer itself?

  Any help is appreciated and thanks for those who respond.

  Yes the drive hard failed, no way to fix it otherwise that replace and reinstall Windows using HP recovery media.

  Once the old disk is removed, you can try to recover the data by plugging it on a different PC with a usb to sata adapter cable, see if Windows loads the player in the Solution Explorer, if it is a copy and paste any data that you need, copy it to the PC it is connected to as soon as possible.

  USB to Sata adapter or similar

  http://www.Amazon.com/STARTech-com-SATA-drive-adapter-cable/DP/B00HJZJI84/ref=sr_1_1?ie=UTF8&QID=1439231323&SR=8-1&keywords=USB+to+SATA+Adapter

• Satellite l350-262 HARD drive failed on the first reboot

  Hi guys,.

  I just bought new satellite L350-262 of amazon.co.uk
  It was delivered today so I started to put in place. It started fine, let me regional selection and networking options, and then it restarted and...
  I saw console message saying "a disk read error occurred...". "that indicates a failure of the HARD drive.

  I restarted and went into the BIOS settings and it appears on the first page of the BIOS that he does not see the drive (can recognize the DVD), but on the priority start screen TOSHIBA (and some) against the HARD drive.

  This problem occurred after the first reboot Windows 7 installation is forcing you to do, I didn't have the chance to create backups, and I can't see windows being installed at all, cause I can't do F8-> recovery which I thought to try as well.

  I think return the laptop it does not work, but before that... you have other ideas?

  Is it worth to make diagnosis of disk? Even if it says disk is ok, how I reinstall/install the system preloaded with no disk backup etc.?

  Thank you
  Greg

  > I think return the laptop it does not work, but before that... you have other ideas?
  I'm afraid, if the disk HARD is not recognized in the BIOS, that means HARD drive failure and you will not be able to recover it with the help and recovery disk or using recovery disc HARD m.
  It s really strange that a HARD drive is dead at first, but what looks like a bad luck, this can happen, because it s a machine

  Usually the HARD drive is under warranty as the entire notebook then you can request a hotfix and warranty would cover everything

  Welcome them

• Short DST Test failed

  My Compaq Presario CQ62-23 1NR specifications has been freezing and locking up.

  The tools of diagnosis HP just told me that the Quick Test of the DST failed and directed me to this website.

  The failure ID is PLP9B3-55271 X-XD003G-60WC03

  This laptop is out of warranty.

  What are my options?

  Hello

  Your laptop is listed as coming with a 320 GB hard drive, but since there is no real difference in cost, you can just as easily install a 500 GB or750Gb HARD drive if you want a little more than space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 57 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• HP Envy spectrum XT Ultrabook P: do not charge the battery

  Battery does not charge. On connecting to the adapter sector is showing a charge of 9% and not charging.

  prad_paul wrote:

  Solicit comments on the update of the Bios.

  I had checked a while back and the HP site said that all my drivers and Bios are up-to-date.

  The dignostics battery check however recommended replacement of battery.

  What I need to check further or simply go for a replacement battery.

  Concerning

  If battery dignostics check see the replacement of the battery, you can use HP Support Assistant double-checking.

  FTP://ftp.HP.com/pub/SoftPaq/sp68001-68500/sp68201.exe

• 13 spectrum HP ultrabook: cursor disappeared and the touchpad no longer works. Usable only to touch screen

  When I turned on my ultrabook today, the cursor is invisible. The touchpad is also that no longer respond. I can only use the touch screen. My product number is G1Z94EA #A2N

  Hi @Reem12,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop 13-3003ex of spectrum HP and issues with the Touchpad and the cursor in the process of disappearance. Some say that you could restore the BIOS using factory default values with this. Here is a document that shows you how to restore the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Use an existing drive - failed with the General system error

  Hello

  I have a 5.0 esx host. as soon as I created a virtual machine and installed an operating system.

  Now, I want to have another exact copy of this virtual machine.

  what I've done is therefore:

  • copied hard and flat-vmdk vm1 files in another data store.
  • in the Wizard "Select a disk" has created a new vm2 and chose to use the existing virtual drive (chose the path where I copied the vmdk files).
  • When I try to turn on the vm2, it fails with "does not illuminate: General error has occurred."

  What Miss me in the configuration.

  Please note that I have so not vcenter server cannot use cloning option.

  Thank you.

  You will find may be easier to use the functionality to export the OVF template and deploy OVF model in the vSphere Client. Export the virtual computer off and when you deploy the same VM you can rename and choose the destination data store. The configuration will be supported and then you can customize just the required guest OS.

• HARD drive failed on the Satellite 5100-603 - PXE - E61: Media test failure, check cable

  Hello

  my laptop enter to the BIOS and tell me 'Intel (R) Boot Agent Version 4.1.03 Copyright (C) 1997-2002, Intel Corporation.
  PXE - E61: Media test failure, check cable
  PXE - B0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  and I started to install windows, it tells me 'hard disk without work... '. »

  Help me please

  Hello

  Sorry but I don't understand what kind of help you want. If the HARD drive is faulty, you should exchange it.
  Moreover, what model of laptop do you have?

• Portege M700 - DVD drive fails during the recording of discs

  Hello

  I tried the Disc Creator that came pre-installed and also Nero 9.2.6.0. All this on Vista 32 bit.

  The latter seems to have no idea about the problem, as it says smething like unknown failure.

  The creator of disc mentions error code 380381-26-BF040304.

  The problem occurs only at the beginning, I tried with three discs, so I don't think that the disks are the problem. In any case, they are DVD + R DL Verbatim and support up to 8 x, while the recorder goes only up to 4 x for the double layer, so I think I'm ok.

  My suspicion is that maybe the firmware in the DVD version needs update... He mentions Hw 1.00, 1.10 Fw. Other manufacturers of laptop as offer updated firmware DVD for her, but I couldn't find one of TOSHIBA.

  Any ideas?

  See you soon

  Hello

  There are several disks for Portege M700, they are compatible. Usually in the user manual, you can find a list of supported CD/DVD players they are pre-tested by Toshiba and work correctly.

  If you have any other questions about a new drive, ask the service provider authorized in your country. They can offer you a compatible player.

• Z500 hard drive failed, when the new bios disk inserted don't is not loading

  Out of the blue my z500 crashed and restart the hard drive was not recognized. I opened and made sure it is properly connected. Still nothing.

  I bought an ssd and inserted into the slot of the hard drive and when turned on it flashes the lenovo bios boot screen then instantly goes black. It flashes black then black and backlit constantly

  I removed the SSD and it loads the BIOS without a drive.

  I returned the ssd and got a replacement. The same problem reoccured.

  The ssd is approved to the z500 site crucial and fine as an external hard drive can be installed.

  The original hard drive makes a powered noticeable when rattle noise so I guess it was a normal failure.

  Any ideas? Any other information needed? I am a complete newbie to these forums and appreciate help from anyone.

  Thank you very much

  caduceusuk wrote:

  Out of the blue my z500 crashed and restart the hard drive was not recognized. I opened and made sure it is properly connected. Still nothing.

  I bought an ssd and inserted into the slot of the hard drive and when turned on it flashes the lenovo bios boot screen then instantly goes black. It flashes black then black and backlit constantly

  I removed the SSD and it loads the BIOS without a drive.

  I returned the ssd and got a replacement. The same problem reoccured.

  The ssd is approved to the z500 site crucial and fine as an external hard drive can be installed.

  The original hard drive makes a powered noticeable when rattle noise so I guess it was a normal failure.

  Any ideas? Any other information needed? I am a complete newbie to these forums and appreciate help from anyone.

  Thank you very much

  Try to install the ssd (of course power should be turned off before doing so). After the physical installation and place the back cover press the NOVO button. A menu should appear and select bios Setup to access the bios. If you can go into the bios put the bios configuration to the default values. Then set the PXE boot to disable. Save and exit.

  Note: You must start in a usb/dvd of windows installer since the ssd has nothing about it yet. Then may need to change some settings in bios inorder to do this.

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   

• TouchSmart 15-d053cl: disk hard short DST Test failed

  Hello

  Recently, my computer froze completely, and I stopped him with a long press on the power button. When I turned it back on, Windows would not start. It would not start for a very long time and finally the hard drive would become inactive. I open the BIOS diagnostics and ran a test of the system. I got the following error message:

  Test of DST short hard disk failed

  Error code: RLLFTT - 7717 ST-MFKR6J - 60S 003

  Product ID: F5Y25UA #ABA

  Does this mean that my hard drive is defective? Since I've been able to boot into Windows, but it runs a lot slower. Do I need to worry? I ran Chkdsk, but he finds no errors. My files are still in place and I am able to access very well. What should I do about it?

  Thank you!

  KP

  Kpenguin wrote:

  Hello

  Recently, my computer froze completely, and I stopped him with a long press on the power button. When I turned it back on, Windows would not start. It would not start for a very long time and finally the hard drive would become inactive. I open the BIOS diagnostics and ran a test of the system. I got the following error message:

  Test of DST short hard disk failed

  Error code: RLLFTT - 7717 ST-MFKR6J - 60S 003

  Product ID: F5Y25UA #ABA

  Does this mean that my hard drive is defective? Since I've been able to boot into Windows, but it runs a lot slower. Do I need to worry? I ran Chkdsk, but he finds no errors. My files are still in place and I am able to access very well. What should I do about it?

  Thank you!

  KP

  Your hard drive is defective and must be replaced.  You can continue to use your system as-is, but it will continue to get slower and, possibly, you will have problems to start as you have done before.  It is recommended that you back up of your data (photos, documents, etc.) on external media (flash drive) and then replace the hard disk.  After replacing the drive hard, you have to reinstall the Windows operating system using the HP recovery media.

  It is not very difficult not expensive to replace the hard drive, so we can walk you through it.  If you are in warranty, you can contact HP for replacement parts.  If you are out of warranty, then you need to buy a replacement hard drive and the HP recovery media.

• Does not power spectrum HP ENVY Ultrabook 13-2057nr of the battery (at the level of 93% charge)

  Greeting,

  I have an unusual problem with my HP ENVY spectrum XT Ultrabook 13-2057nr.
  

  I bought this recently used computer.  The battery seems to be dead, so I replaced it with a new battery, which seems to be charge (to 93%).

  However, the computer will usually not market unless the AC adapter is plugged in.

  As a general rule, the laptop will not be under voltage battery (charged to 93%).  It will work normally if connected to the power adapter.

  From time to time, if the computer has been loading for 15 minutes or more, it will be under the battery voltage. However, if it is off, it will be only re-power-on if connected to the adapter.

  If someone had a similar problem or have thoughts?

  Thanks - Ric

  Hello Rico88,

  Welcome to the HP Forums!

  I understand that the battery does not load to 100% and has a strange behavior. To start, please try test and calibrate the battery. You should be able to know if the battery has problems.

  If the battery seems to be good, you can try to improve the performance of your battery.  For more information about improving the performance of the battery, please consult the following document: improve the performance of the battery (8 Windows 7, Vista).

  If none of this helps, you can try purchasing a spare battery if the computer is not in the warranty. If this is the case, you should be able to get a replacement in the HP support by phone. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns, and if it has helped. Thank you for choosing the HP Forums. Have a great day!

  Mario

• Satellite A500 - display driver failed

  Hello

  Recently, my three year old Toshiba A500 (0400E PSAM3A) has started to display the message "Display Driver failed" and the screen became all BEHLULI and weird. I'm sure it's the graphics card, open the computer self and he cleaned it with an air compressor that makes it better for one day, but then he returned to normal. I also formatted which did not help.

  I just want a second opinion as to whether it IS in fact the graphics card (not drivers), and if replacement of the graphics card would be a possibility? I had a quick glance when I was cleaning up the outside, and the map is not soldered to the motherboard.

  Any advice would be great,
  Thanks in advance!

  Did you notice this problem when you start Notepad in safe mode too?
  Have you also tried to reinstall the recovery image and test the feature with the factory settings? Is - this result is the same?

  General replacement of the GPU is not supported, and because of the design of specific laptops (cooling system) GPU shouldn't be improved.
  Replacement? Can you do this alone eventually?

• HP ENVY 14-2160se hard drive failure

  There is an "error reading drive" when I start and it does not start in windows at all. I did a hard drive test in BIOS and the short DST failed and the failure id is GTU23F-5QF788-XD6V5F-60UR0 for 1 hard drive. I know there is an SSD of 80 and 750 HD but that one failed?

  If the ssd has failed can I use the 750 GB HD or does take both?

  If I need to replace the SSD I can replace it with a regular HD (on a budget) and which drive size do I need? 2.5?

  If in warranty, you can get a guarantee of replacement free of charge for you.

  The failure code is for the old hard drive, not the SSD. SSD failure is not common.

  You can replace the hard drive with a drive hard laptop SATA (2.5 ") is the same size and up to 1.5 terabytes.

  source : service and maintenance guide reference