HP Envy Tablet - cannot connect when away from home

Similar Questions

• HP TouchSmart Tablet: unable to connect to wifi when away from home

  Just bought a HP TouchSmart laptop to use when away from home. I just took in Santa Fe and could not get a wifi connection. I could get one on my smartphone, but not the laptop. Rookie here... Please dumb down of recommendations!

  taosdon wrote:

  Just to remind you, I'm not computer savy. I always thought that data on my phone meant that I was hooked up to wifi. I have to pay for some sort of service to use my laptop other than at home? I have wifi at home. Thank you!

  None of the cell if the installer can use wifi connections or a cell phone. Mobile home mine is configured to use my wifi and when I'm out of reach it switches to the use of the cell phone Tower. It's for the smart phone not your regular clamshell phone types. So the best test is to take your laptop and go to a public wifi and see if you can connect to the wifi and use which would be another way to diagnosis if the problem is the Wi - Fi connection or something else.

• travel with the zeen/find a new WiFi connection somewhere away from home

  I have to be near my printer (within my wireless signal) to use the Zeen?  I will be going and I don't know where or how to get the zeen to find and block in another of my house WiFi signal. I went to a place that has a locked wireless signal and went somewhere (library) that should have have an open signal. I couldn't figure out how or where to enter the code for the House with the locked wireless.

  Help is so appreciated. So I want to take the zeen for tips internet while he's on vacation but impossible if it won't work not independent of the printer. The printer just can't go... it's too big for my suitcase

  REF = HPc510a, removable zineb

  Hi imtad,

  You can take the Zeen, all you have to do is of the home screen:

  1. Click on the menu button (the four lines per home icon).
  2. Go into settings.
  3. Go wireless.
  4. Select the network to which you want to connect at the bottom of the screen.
  5. If a password is required, you will be asked to enter.
  6. At the top of the menu, the Zeen Wi - Fi wireless, it must be said 'Connected' if all is successful.

• I forgot my Hotmail password for access when I'm away from home.

  When I was away from home recently, I couldn't remember my password to access my Hotmail emails. How will I know what it is?

  You forgot my password option to retrieve your password.

• the iPhone browser will not work away from home

  I'm new to i Phone 6s and difficulties with the browser.  At home, it works fine gifts directions but when far from home, that he does not know where I am, so the a route definition is impossible.

  As I am new on a Smartphone (and not very tech savvy) I suggest that anyone kind enough to offer assistance consider very basic errors, I could be guilty of.

  Thank you in advance.

  Hey there Drummer3708,

  I see that you are experiencing some problems with the accuracy of the GPS in your iPhone.  To help solve this problem, I suggest you follow through the tips below.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  Privacy and location for iOS Services 8 and iOS 9

  Take care.

• Using HomeKit away from home

  Do I understand the instructions re using HomeKit away from home? I read the instructions that I have to have an Apple TV, or I can't use HomeKit away from home. What is the correct understanding? Thank you!

  It depends on the product, but yes in some cases they use an Apple TV as a hub so that you can access the service by far.

• should I unplug iMac so that away from home for a period of time

  I'll be away from home for 6 weeks, we have power periodic interruptions where I is direct, he bet to unplug the iMac and airport Time Capsule at the moment that I'm missing?

  As long as the computer is turned off, it is not really necessary to unplug. IF you live in one are frequent interruptions with electricity then I would say strongly to get a UPS to protect your devices.

• How do I enter usb storage away from home?

  I would like to access my usb storage away from home since Ios and android devices

  I googled and have not been able to find info.

  Thanks adavance.

  In addition, you can also see these articles for more info on the EA4500 router.

  Linksys router Smart Wi - Fi, EA4500 frequently asked questions

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=f61db959480e4c5ca31657cea9355fad_EA4500_Frequentl...

  Get to know the router Linksys Smart Wi - Fi, EA4500

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=37df66468156452ab820c9e200690f08_Getting_to_Know _...

  How manually update the firmware on the Linksys WiFi Smart router

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=a3a56a63d7fe440da177b1b8d186f40e_How_to_manually _...

• NSLU2 - cannot connect a network - xp home sp3 drive

  Hello!

  I have a network of two xp machines connected to a wrt54gl router (dhcp) a xp pro and XP home.

  I bought a NSLU2 unit. I successfully set up according to the instructions of a xp pro machine with a USB plugged into the port of disk1. It shows on this fine machine as a network device, as well as two shared folder (admin and disk1) without further delay. (A minor hiccup: I tried to serve as a dhcp client, but I couldn't for some reason, but it works very well with fixed ip.)

  However, on xp home, I can't connect at all. It does not appear in the My network, cannot connect to it with-. I can see the device in my work group, but that's it, if I click on explore, it hangs for a while, then gives a "no access, no doubt you have no authorization" error.

  I can still access it from the web interface, but otherwise no luck.

  I tried to create a user on the NSLU2 web interface with the same name as the users private XP, without success.

  Someone has an idea what to do?

  There is a resounding slap on my forehead. It was through the firewall.

  (Although now, I do not understand, how NSLU2 forced on another machine with the same parameters...) I just had to add the slug of the IP of the zone of confidence.

• Disorder of connection Office remotely from home, but not at the school next to the computer is trying to access

  I have windows 7 Home premium edition. My laptop is a toshiba satellite A665, with a 64-bit operating system, I use the remote desktop connection for access to several computers at school. When I'm in the same room to access the remote desktop computers, it works very well (I tried all 5 computers).

  From home, when I click on connect, simply Initializes the connection, then said he can't connect because 1) remote access server enabled not (I know I did it on the computers at school, as well as it worked before) 2) the remote computer is disabled, which is not true) 3 the remote computer is not available on the network (not sure what it means, so it could be the problem).

  Why it would work very well before when in the same room and not at home?  Help!

  Thank you!

  My husband rocks and told me that I had to be connected via my VPN. Then he helped me to install the cisco vpn and connect, so I can be on the appropriate network. All's well now :)

• My Dell coming 8 Pro Tablet cannot connect to the internet

  After that the last update, my Tablet Windows couldn't access the internet. I get this message when I run a troubleshooting tool:

  "The Dell Wireless 1538.802.11 a / ln g adapter knows pilot - or hardware-related problems."

  My tablet is our guarantee.

  I contacted Dell support via my laptop and got absolutely nowhere, was mixed around until I finally got a page that asked me several times for my service ticket #.  Whenever I provided, he gave me the same screen, he demands again. A little surreal.

  So here's what I know: my Tablet has no wi - fi connection. My tablet is plugged into my laptop, but my laptop does not recognize it as a drive. So I can't transfer anything directly from the internet on my Tablet through my laptop.

  (They are both products of Dell. Family feud?)

  So I need to find a way to get information on my Tablet without a direct connection and wi - fi, in which case the problem requires that.

  Or it could just be a problem with Windows Update. A year ago, someone has answered a similar question on this forum and advised the questioner to find the numbered Windows updates installed Xxxx and Xxxx, then uninstall them. The numbers, of course, do not match updates that have been installed just before that my internet connection disappeared. So I would have no idea what to uninstall.

  I would appreciate any advice on how to solve this problem.

  Thank you

  Janice

  In a general way, because your DV8P is a complete computer, you can just connect to your PC you could do with a smartphone (you may be able to do using a special cable).

  To solve the problem of WiFi:

  I had this problem and Dell technical assistance asked me to do a 'discharge' on the Tablet (apparently, static can accumulate in the Tablet, leading to the issue of WiFi).  Disconnect the power supply, if connected. Hold down the power button / stop of the Tablet and turn the Tablet completely off, continue to press and hold the power for 30 seconds (or maybe a minute); Let the only Tablet for 2 minutes; the Tablet is reactivated.  Which, we hope, will fix the problem (it was for me).

• HP Envy 4500 cannot connect wireless to the printer

  Recently I bought HP Envy 4500 printer. Connected to my router ok TP-Link3631 and have successfully printed from android phone and portable computer connected wifi but cannot print wireless from the office, running XP Pro, but allows you to print via a USB connection. Office see printer through a router using 192.168. etc and printed the report. Have tried to install the software via disc cd and internet several times, Inc. reinstall, but can not get computer to connect. Have been round and round in circles several times, also used print and scan doctor without success. It seems that the software is not fully installed. Or maybe something wrong with the network. Anyone have any ideas? Thank you

  Hi @atr345,

  I see by your post that one of the computers is not recognizing the printer on the network, but you can print by a USB connection. I can help you with this.

  Type the IP address in the address bar of Internet Explorer to see if the built-in Web page printer server load on this computer.

  Check the computer IPV4 address to see if it matches the first 3 games of the IP address of the printer.

  Go to start, type cmd in the search box, enter, then type ipconfig.
  Check the IPV4 address.
  Now, check the IPV4 address for the printer. (192.168.1.9)
  Do the first 3 sets of numbers match? (if they do not match then the computer is not on the right network)

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

  If the available printer built-in Web server, the first 3 sets of numbers of computers had matched the address IPV4 of the printer and you could ping the printer, then try and configure the connection to printer wireless via the USB connection.

  Installation of the software of the printer for a wireless network connection.

  Please go to the first step: preparation for installation, number 4.

  If you need help, let me know.

  Good day!
  Thank you.

• Cannot connect when Filevault is enabled

  Has anyone else had the number where they turn off filevault encryption in recovery mode, or they can not connect?

  The question began a few weeks ago, when I started having to turn off the computer and reset the PRAM. It would take to get my built-in keyboard and the trackpad to function has the fast connection after coming out of sleep.

  This same last week the PRAM reset don't would not fix the problem and fortunately the restore mode password reset brought me to disable my filevault encryption. This allowed to connect and enter my office.

  I then went through a few checks of the terminal base to verify the disk errors or file permissions and it come clean.

  I turned then encryption on my HD, and the problem has returned to the login screen.

  I disabled since filevault until I understand what is happening.

  I have noticed that this problem could be related to my use of my MacID software which allows me to use my fingerprint to iPhone reader unlock my MacBook.

  I started using this software at roughly the same time that this problem started occurring. This problem has been noted in the past?

  If so, what are the best solutions to work?

  Same thing here... the question begins to appear a month ago. A case open at Apple... updated the software and even re - install everything from scratch, in the image of failure to factory then re - enable FileVault, the same thing happens again.

  An interesting thing is the keyboard responds in fact every 8 to 10 seconds at the login screen, and you have about half of a second window to enter your password. If you do it slowly and well, you should be able to enter your password and login.

  Bringing in mine at the store for additional troubleshooting.

• Computer HP model # DV7-3162NR, cannot connect when the password is entered

  After typing the password is a statement saying, "can't logon user profile Service service". What can be done to correct and go to the line.

  Thank you

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• ldap_result back cannot connect when inactive more than 30 dry between calls

  Hello
  
  I've migrated from 5.2 to 11g and got an error that I don't have to 5.2
  
  When retrieving a large number of asynchronous entries if the process takes more than 30 seconds between calls to ldap_result he received an error "unable to connect to the LDAP server.
  If I did the same search with a lower appeal or equal to 30 sec, I don't received entries 70K no problem.
  
  I changed the idle_timeout to unlimited - same mistake
  
  I wrote a piece of code that perform research, get 100 results an asynchronous - sleep for a few seconds and go get the next 100.
  
  If sleep is 30 seconds or less it works OK
  If sleep is 31sec or more it fails after the first sleep (153 listings)
  The same can be accomplished by using ldapsearch and stopping the result for more than 30 sec using CTRL-S
  
  Is there a setting I'm missing in 11g?
  
  The same code works well with the same data in the version 5.2
  
  Thank you

  Such behavior is probably caused by a timeout setting - it may be nsslapd-idletimeout, nsIdleTimeout or a time defined by the customer in the real demand. It can be useful if you would paste the access showing log a full timed out connection - BIND thru DISCONNECT - more than the output of "grep-i dse.ldif timeo."