HP Envy tilt 23 MCE Remote Control does not work

Hello

I just bought a m202eg want to tilt 23 which included a USB DVB - T Tuner (AVerMedia A867) and a model of HP brand remote MCE Rothko (P/N 684258 - L31).

The works of tuner as expected, but the remote has no effect at all, just blinks twice on each press and nothing else.

I have to mention that the pilot of transmitter/receiver infrared eHome in installed correctly, Windows HID service is running and I also tried the remote on a NECK from Intel with IR integrated without success.

In addition, as recommended on the back of the remote control, I tried to sync it with the receiver by keeping 'i' and ' # ' pressed for 5 seconds, 6 cm for the receiver, but instead of getting 2 flashes OK, the distance LED stays on for a few minutes and then blinks 4 times.

I don't really have any other ideas, and I've already lost 2 days trying to get it to work...

I thought about it, this remote is NOT IR media center remote RC6, even if she looks identical.

It also works without the tunner AVerMedia DVB - T USB plugged my inclination, because he is using the USB 2.4 GHz key for mouse and keyboard - this is why he needs synchronization.

So, this can be marked as resolved, it will be useful someone someday.

Tags: HP Desktops

Similar Questions

  • Satellite X 200 - after upgrading Vista remote control does not work

    Hello

    I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

    Is there a driver for my remote?

    You may need to install the infrared driver.
    This driver is required to activate the infrared port on your laptop.

    You can find it here in the X 200 section
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Satellite P100 remote control does not work

    Hello

    Guys, I bought a toshiba satellite p100 and the remote with it does not work...

    no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

    Help, please...

    Thank you...

    Post edited by: qazam

    Hi Qazam

    How did you test the remote control?
    What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

    I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

  • IR remote control does not work with the new imac

    IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

    Correct, because Apple no longer includes the IR sensor in newer models

  • Qosmio G30 - Media center remote control does not work in windows

    Dear all,

    I have a Qosmio G30-194,
    first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
    Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

    Please advise me what to do, should I send it to the service center, or there is an easier solution.

    Mazen h
    NB:,: my laptop info are:

    PQG32E-01P018AR model number

    Thanks in advance

    Hello

    > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    If you had a problem with the VGA chip then the whole motherboard has been replaced.
    Maybe it has something to do with your problem.

    Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

  • Remote control does not work, and the load does not appear on Apple TV

    Hello

    I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

    Apparently that was the case.   He seems to have just died.

    I did pay for more than two hours and it still does not appear under devices Apple TV.

    My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

    If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

    Any suggestions on how to fix this?

    A reset is complete? Restart... no change.

    Thank you

    Bob

    1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
    2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
    3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
    4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.
  • Satellite A500 - 14 H - remote control does not work

    I have a Satellite A500 - 14 H with the big remote control, but it doesn't work.
    Can someone help me?
    I installed the remote control manager, but no change. He still does not!

    I assume that you got your laptop with preinstalled operating system.
    Have you tested the feature with the parameters of this plant?

    Is remote controller completely dead or some functions do not work?

  • BD Playstation Bluetooth remote control does not work with Toshiba BT stack

    Hello!

    I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
    But if I press the buttons on the remote does not respond any personal computer.

    I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

    If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

    Please, advice that tests should I use or do I have to install any additional software.

    Thanks in advance for your kind attention!

    Ensure that the AV remote control Service is running:
    Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

  • Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

    I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

    I can not find a model of dv9249 specifically on the hp site. I found the dv9200
    series. you have a link to your specific model?
     
    in all cases, try to remove the Device Manager devices and if requested if you want
    to remove drivers, select Yes. then make a stop at cold and then turn it on.
    Finally, see
     
    link of a person found an alternative driver that solves the problem) on the page
    (See above).
     
    It seems that several HP models affected related issues.
     
    If this does not resolve the problem, suggest that also posting in the forums of HP.
     
     
     
    On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
     
    > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
    Interface
    > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • Satellite A200 - 25 X - remote control does not work on Windows 7

    Hello

    I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

    Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

    I hope someone here can help me.

    Thank you

    Hey,.

    Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    * Archive * > Satellite > Satellite a series > Satellite A200

    Check this box!

  • How to check the system configuration of the SX20 if the touch screen and the remote control does not work

    Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

    I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

    Hello

    option is to have access to the local switch and run "show cdp neighbors detail."

    or

    Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

    regds,

    Aman

  • Satellite A200 remote control does not work with Vista Ultimate

    Anyone know what I have to work for my TOSHIBA (Media Center) remote?

    I had Vista Ultimate installed on my Satellite A200 (PSAE6).

    Remote has worked on software pre-installed that carried out with (he was Deutsch).

    I almost tried everything, all the drivers are installed, I searched on the site of Toshiba drivers and nothing.

    Help, please.

    To my knowledge the Enbeded IR V0.0.0.6C was installed in the factory Toshiba Vista image. This looks like an application needed to run this command remotely.

    Unfortunately, the application looks like a part of the image of Toshiba and was published by download

    by the way; A200-xxx unit you have exactly?

  • LaserJet Pro M125nw MFP - scan to application all-in-One remote control does not work

    Hi gurus,

    Basically, I bought that Super-imprimante and I now trying to scan to my mobile devices.

    I have an iPad 2 iOS 7 on 2 Android devices (small tablet and phone) both running Kitkat 4.4.2

    I try to send a scan of all these devices and retrieve the output in my mobile, in fact it is quite described here and for exactly my printer model: http://support.hp.com/us-en/document/c02486319

    Unfortunately, what is happening:

    -From my iPad, the app AiO says that my printer is not compatible with the application!

    -From my 2 Android devices, the application of all-in-one remote works perfectly, except the scan function as nothing happens (well, when pressing the button 'Preview' or 'Analysis' in the Scan section, I see a button 'Cancel' for 0.1 second and I'm back to this section of the analysis)

    Could someone help please?

    The printer is returned to the seller.

    According to French support, the product page is fake, so I was waisting my time.

  • Inspect the remote control does not work

    I've got inspect edge upward and run OK with my Galaxy S2, when I browse my PC my S2 reflects what is on the screen so no problem.

    I can not, however, get the distance inspection work.  I went in the Chrome Insepctor and deleted some HTML elements so it removes some elements of the screen on the PC, this is not reflected on the S2 however.  I use the trial version and am also connected to OK.

    You have to do, or click on something special to get this working?

    See you soon... John

    Hi John,.

    Looks like you're simply using Chrome Inspector and not our remote inspection function. To start using inspection remotely, open the Chrome extension dialog box inspect dashboard that contains your list of devices, and then click on the <> icon next to the device you want to examine. Should open a new browser window and you should see the DOM newspapers and your machine console there. You may need to click on the link to your device in the first page of this window.

    FYI, a number of tabs will be empty due to the limitations of the tool that we use to do the inspection at a distance (weinre), but without a doubt, you should be able to see and modify the DOM on your device. The changes affect only the selected device, not all your devices or your computer.

    Hope this helps, let me know if you have any other questions,

    Mark

  • My pavilion dv3 that remote control does not work

    Windows 7 is installed

    Hello

    What Version of Windows 7?

    (32-bit or 64 - bit)

    64-bit is here

    32-bit here is the air in input devices (ENE CIR receiver driver)

    Best regards
    ERICO

Maybe you are looking for