HP ENVY TS m6-k025dx Sleekbook: HPSA

Similar Questions

• Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

  Hello

  I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

  I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

  The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

  I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

  Nadeem

  From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

• HP Envy m6-k025dx sleekbook

  I wonder if this particular model of Envy is able to return from Windows 8 on Windows 7?

  Hello:

  Looks like you can use all the W7 x 64 drivers and this model on this one, except the graphics software and the wireless.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6521374#N536

  Graphics card:

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23644&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType =

  Wireless: I would need to know what model of laptop Intel wireless card is.

  If you are unsure, go to Device Manager, expand the category network adapters and you will see the name and model of the card WLAN Intel that are listed there.

  Before installing W7, make sure your media recovery W8 first where you want or need to reinstall W8.

  Do not bet on the recovery partition works for you.

  Here's how the recovery media if you have not already done so.

  http://support.HP.com/us-en/document/c03481733

• Can I upgrade Windows 8.1 HP Envy m6-k025dx sleekbook?

  My son got this laptop for Christmas and immediately attempted to upgrade to 8.1 Windows and the screen went white.  I have restored the laptop after much effort and have not tried to update since... with the new update of Windows 8.1 which comes out April 8 and all the patches of HP drivers, anyone know if the upgrade process work now?

  Hi hpnonenvy17,

  Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have a question about upgrading to Windows 8.1. You should be able to update to Windows 8. 1 very well, all the drivers are available here. You can run the Wizard to upgrade to Microsoft to see if there is a conflict with your software.

  Thank you

• Envy brick and bought Sleekbook 4 PC recovery USB Kit helps do not...

  Everything first in detail:

  HP Envy Sleekbook 4

  C2K79UA prod # #ABA

  Version of the BIOS F.23

  OK, my problem. I never liked the Windows 8, which took over. Since people like @ HP offered no option to downgrade to this travisty of a BONE, I installed VMware Workstation on this laptop and done my job on a VM 7 Win. Everything was great.

  Then, I heard some improvements promised in a future release 8.1. I did my USB drive to restore system, like a good boy. I installed the version beta for 8.1 with the understanding that once the beta has expired I would just empty my personal files on my external drive and do a factory restore to my recovery USB drive I did. No problem, right?

  Recovery failed. Something something causing a panic in the system.

  Now, I should have stopped there... but... I did not. It would have been an easy way, and we cannot have. I noticed some drivers Windows 7 had been added to the page for my product. I gave that install a blow, but not, and probably my deepest hole dug and I most probably bluffing some partitions that I certainly would. Win 7 could not see the SATA, just the SSD drive, and I could not find suitible Win 7 sata drivers for installation.

  So, I went online and ordered the USB for my product recovery Kit.

  When I boot from it, I get the following:

  "Recovery not taken in charge to the title of the current configuration, please turn on the option for the Intel Smart Response Technology and try again.

  
  I see two options for Intel in my BIOS Enable/Disable...niether contributes

  I also tried with both enabled and disabled virtualization option

  I did the same thing with the help of the legacy.

  Ive tried with the default BIOS loading.

  Ive tried with boot secured on and outside.

  Ive has run out of memory and disk checks... all came back good... except the only player that he checked was the SSD, of course.

  Ive even tried to remove the SSD drive... and try to restore. don't ask why, I read in another forum, someone said this worked.

  Is the recovery USB disk I bought from HP not smart enough to load the SATA drivers and rebuild partitions?

  Is there another keyboard combo called the Intel SRT menu or settings in table?

  I'm not a novice computer, despite some of the errors above to the contrary. I guess I'm very noob in the new world SSD/HDD and layer the puzzle EFI. If you can help, I will be sin no more.

  Please... Please help and thanks in advance.

  Just thought I'd throw in something that I saw on another post. The owner he said "Delete all the keys to starting security" in the BIOS.

• HP ENVY M6 K025dx: Touchscreen unresponsive in HP ENVY M6 ts K025dx

  I think it's a hardware issue... because when my laptop screen is at 100 degrees, then tap works... and when I tilt him little more than 110 or more, it stops... and says not detected no touch screen... can u say its hardware problem?

  Just as a comment, the envy of M6 has serious problems heat-wise. It can be caused by melting of components - what happened in my desire of m6.

• Interface SATA for HP Envy Touchsmart M6-k015dx Sleekbook

  I was just wondering if the mSATA on this laptop port are SATA III or SATA II or something else?

  envyguy3113 wrote:
  

  I was just wondering if the mSATA on this laptop port are SATA III or SATA II or something else?

  Hello

  I guess, but the mSATA is directly connected to the motherboard, so she must use the connection SATA III...

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• E0L06UA: HP ENVY TouchSmart m6-k022dx Sleekbook

  Recently, I bought this laptop from someone.  I can't use some of the USB slots. Everywhere wherever I look, there is windows 8 drivers, but nothing for win7 64 bit OS installed.  My pilot errors are:

  PCI device

  SM Bus controller

  Unversal USB Bus controllers

  Any help is appreciated.

  The wrong chipset on me, but the update auto-AMD on the suggested page http://support.amd.com/en-us/download/chipset?os=Windows%208%20-%2032 , even if its description does not list Win7, the download is.

  Everything is fixed!

  Thank you very much!

• Envy TouchSmart Sleekbook: touchscreen which model do I have

  I cracked my screen. I am out of warranty. I don't remember entered touch model with my DESIRE - FHD or just the HD. How do I know if I can order the right pair? I would rather that she goes once I use the screen now

  My # is E0K41UA #ABA product

  Model: M6-K015DX

  ENVY TouchSmart M6-K015DX Sleekbook

  Thank you

  TG66

  The Specs page for your model is here:

  http://support.HP.com/us-en/product/HP-envy-M6-Sleekbook/5375391/model/5395105/document/c03785356/

• Envy of HP TouchSmart 4-1203ea Sleekbook

  Hello

  I'm looking for the update to the newest bios FRO HP Envy TouchSmart 4 - 1203ea Sleekbook

  I searched the site of HP and used the HP tool but can not find one - HP site suggests, I therefore have the most recent bios. The bios when I look at msinfo32.exe shows Date of Version of the BIOS: Insyde F.21 14/11/2012

  I bought the laptop over a year ago (sometime in 2013)

  I upgraded the laptop to windows 8 for windows 8.1

  It has 16 GB of DDR3 RAM

  Samsung 850 PRO 1 TB SSD

  Intel AC 802.11 wireless card

  Haswell i5 processor (4th generation)

  All the drivers are up to date on the manufacturers Web sites

  All the updates of windows installed

  Anti-virus and Anti-malware scans have been completed and everything is clean

  I cleaned the fan and cleaned the vents

  I disabled the fan options in the bios so that they are not always on. I also tried with fan always on.

  The fan is constantly on - according to CUPID Hardware Monitor PRO:

  temperatures are 63-68 degrees C on each core

  temperature of SSD is 40-41 degrees c

  curernt voltage is 15.93V

  I don't think it's hot particularyl?

  Would you recommend using Paste artic silver 5 on this laptop for the CPU and the GPU?

  I read a few posts on the use of a Gummy cpu / gpu paste, it seems that the general consensus is that this is necessary if the GPU or CPU is slightly raised.

  Also is it worth of replacement of pads with copper trim and adding the thermal paste after?

  I have worked in it for years and have built several computers desktop and have repaired many laptops, but would like to chcek if there is nothing else I can do before you buy a block of cooling?

  I usually use the laptop on my desk at home or at work.

  I also read a few messages to the topic to make additional holes in the case of the laptop then adding mesh to avoid that the dust is does anyone have experience with this?

  There are positions on the amendment of the fan to improve the airflow by cutting some of the envelope of the fan?

  There are fans of spare parts for laptops which are quieter or cooler?

  I appreciate there is a lot of questions here and any help would be appreciated.

  Thank you very much

  James88

  Then... the results! Temperatures plummeted to 8-9 degrees indle and at the charge!

  They cut to be in the 50s and 60 for 40 years and 50 years

  I stripped the laptop and applied new thermal paste to the CPU. Be careful when you remove the 4 screws that hold the processor, they may be a bich to go out, make sure you use the right size screwdriver and not screw them (make sure you have a spare room if you are new in this and other tools)

  My choice is the block thermal artic silver 5, which is about £5 online on most Web sites. I have used this on several laptops and desktops from the front to reduce the temperature.

  I also applied bit of electrical tape from the fan to the vent thingy (not sure what the correct name for this what) that connects the fan and the heat pipe set, I managed to reduce the tempearate of about 8-9 degrees. Normalling running under 45 degrees. The fan is now very very quiet too!

  I also discovered that the CPU is soldered to the motherboard (as I predicted). So the only way to upgrade would be to get a new Board of Directors, which corresponds to the laptop, with the specifications I and not being not a player, I don't think I'm going to need an upgrade for a while yet.

  Any questions, feel free to ask me! :-)

• Envy 14 - k012tx: running games leading sudden delay in the process of game speed with excess heat

  When running games like NFS MW12 or NFS Rivals. After a few minutes of gameplay, System heat excessively leading thus to slow down the movement of the game with weird sounds of the game. As sometimes happens when running Adobe Photoshop, as well as any other program in the background (or multiple programs). Help, please...

  Gouravxdx

  Welcome to the Community Forum of HP.

  It is a small computer that you are trying to play big games.

  HP ENVY 14-k012tx TouchSmart Sleekbook product specifications

  You are hurting your computer.

  Buy a real computer s gamer.

  Review of HP omen

  For now, you can paste a Notebook cooler under your laptop computer to help it run more fees.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Dead hard drive. How to reinstall Windows 8 on a blank disc (HP Envy DV7 7332ea)

  My hard drive died too.

  Model m6-k125dx (jealousy).

  Same deal, no CD player, have a new hard drive that works.

  How can I get my software reinstalled on the new hard drive (an old man is dead, dead, dead)?

  Note: Went to the link above to look for drive of order recovery software but do not see it on the page.

  On top of that, this CD does me no good because I don't have a CD in the machine.

  You have a way to recover the software in this circumstance?

  Access the link below, near the bottom, there is a section of media recovery order for your model, you should be able to select the type of media some time during the order process.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-M6-K100-Sleekbook/5401210/model/6879010

• HP envy laptop bluetooth for connection soundbar does not

  I have a laptop HP ENVY 15 "TouchSmart m6 Sleekbook.  Bluetooth works.  I have a bar of its Samsung to my TV which is bluetooth.  The laptop detects the sound bar, but will not pair with it.  Any suggestions?  Thank you

  Hi @ndcycle,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your m6 Sleekbook of HP ENVY TouchSmart connect not not Bluetooth you soundbar. Here isa documenton the connection of Bluetooth devices.

  I hope this helps.

  Thank you.

• HP envy ts m6 processor upgrade

  Hello

  I am trying to upgrade the processor in my Hp envy m6 ts so I can play better, but when I watched the maintenance and Service guide for my laptop, it does not show how to upgrade my processor. Is it because Hp does not upgrade the cpu for this laptop or other reasons?

  Hi Cool1315

  Thanks for the reference!

  The processor (Intel I5-4200U) is soldered to the motherboard is not possible to update.

  Product number: E0K41UA

  Description: HP ENVY TOUCHSMART M6-K015DX SLEEKBOOK

  Printed circuit board 732775-501 card MOTHER UMA I5-4200U W8STD

  http://PartSurfer.HP.com/search.aspx?SearchText=E0K41UA