HP f4210 Solution Center does not open

I have tried to scan pictures and now cannot start the solution center to do this. I just uninstalled the program and reinstalled. When I try to start the program, nothing happens. No additional processes appear in the Task Manager. I rebooted the computer since the reinstall twice.

Thank you, Scott

Hello PinballDr,

Welcome to the HP Forums!

I understand that the Solution Center does not open. I will do my best to help you! First of all, I need to know:

What is your operating system on your computer? Windows.

I would recommend this utility called the print and scan Docotor. This helps solve printing, scanning and connectivity problems, including Diagnostics: (this information is declared here.)

  • Connectivity:

Tags: HP Printers

Similar Questions

  • Photosmart e-all-in-one B110a: HP Solution Center does not open

    This problem began in late December 2015.  HP Solution Center worked fine until then.

    Now the printer works well, but the HP Solution Center does not open, so can not scan to computer or check ink levels.  Tried to uninstall the KB3132372 update [as suggested in this forum] and then everything works.

    However, the update (KB3132372) maintains the re-setup and hit the Centre of HP solutions again.

    Is there something wrong with the KB update that disrupts the HP driver?

    Is that what I can do through a permanent solution? (other than uninstalling KB3132372 immediately prior to scanning)

    Thank you.  Problem solved.  I admit I was a little uncomfortable uninstall security updates - but everything is OK now.

  • HP Solution Center: Solution Center does not open

    Recently upgraded to W7 to W10.  After many questions, I go back to W7.  Because I started having some "windows install can not find the MSI file" I uninstalled my HP printer and deleted files.  I then reinstalled the printer (C4280 so this is important) and all software.  The printer works fine but Solution Center no longer opens.  When I try to run it, the "Welcome" screen appears for about a second, then it disappears and the program does not start.  I uninstalled and reinstalled several times without success.  (It worked fine before the aborted W10 upgrade.)  I wonder if an important file (or files) is missing that the Setup program does not replace?  In any case I hope someone can help me to get the program running again!

    Hi!, kelzeegla:

    Welcome to Forum!

    Try with this link... http://support.HP.com/GB-en/document/c04658195?JumpID=reg_r1002_uken_c-001_title_r0001

  • HP SUPPORT Solution Center does not open. Get the parse error...

    I have a HP Pavilion dm4 and HP J6480 printer.

    When I try to open the HP Solution Center I get the following error message - "error Parsing file C:\Program Files (x 86) \HP\Digital Imaging\bin\hpqsloc\1033.xml".

    I tried to reinstall from the original disk from HP.  It works not - says my system (Windows 7-64 bit) is not supported.  But it worked a couple of years ago, when I did first install it.

    I tried to download and reinstall the drivers for my printer.  It does not work.

    I tried to uninstall HP Solution Center, but it wouldn't uninstall.

    I tried to rename hpqsloc to hpqsloc.old and copied the file from my computer of wives to mine.  It does not work.

    I tried to copy the entire file digital image from his computer to mine.  It does not work.

    I assumed that the simplest solution would be to uninstall and reinstall but no luck

    "" "Frustrated - HELP. '"    Thank you!!

    all right you have the software CD if so

    the CD opened by a right click on the CD icon and select open

    Then look for the folder named UTIL

    Then open CCC

    Then look for the uninstall_L3.bat doulble click on it

    you will be asked for your permission can be several times

    and you will see a black screen, then it will ask you to restart your computer

    now, try to install the software and it will work... good luck

  • HP Solution Center does not open

    I have a HP desktop computer which has windows 7.  I started most recently problems when it opens.  I'm dumb as dirt on these computers.  I have a problem with the HP Solution Center, I get the following message. The feature you are trying to use is on a network unavailable resource.  Click ok to try again or enter another path to a folder containing the installation package "SolutionCenter.msi" in the box below... There is a box that has use Source: above it and a box outside next to him who has browse.  Can anyone help me solve this problem, because I think it's making my computer does not properly.  Thanking you in advance.

    Hello Sherry

    The cable that you describe is a USB cable if your printer is not on the network.

    Follow the steps below to uninstall and reinstall your printer.

    First step: clear temp directory
    Type %temp% term or search programs and files of field
    Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    Proceed to step 2 below
    Second step: downloaded and extracted to your system:
    1. download and run the Officejet Pro software and utility delete Drive
    2. when the uninstall is complete, unplug the printer from the computer and restart your computer.
    3 run Disk Cleanup of the folder tools system Accessories\ under all programs
    4. download and install the latest version of Adobe flash player
    Adobe Flash Player
    5 download the drivers and full software features.
    Complete features Officejet 6310 software
    6 reinstall the printer and connect the USB cable when the installation program asks.

  • HP HP Officejet 4500 g Solution Center: does not open. Worked yesterday morning, did not work yesterday afternoon.

    Hi all!  Yesterday morning, I scanned in some documents by using the Center, HP solutions, and later in the day that I was not able to open the Solution Center and got a message saying that my installation was not complete?  I've used this for years with little problem.  I also ran printing HP and Scan doc and shows the printer installed, but when I continue it said that I have to reinstall.

    I took the printer to the printer menu, added the printer, but still no luck.

    I watched 10 Windows update and found that a lot has been downloaded yesterday some time.  I wonder if anyone has reported problems with updates.  This happened again and when I uninstalled the offending file, everything was fine.

    I can print, I can copy, but I can't scan which is very convenient.

    I'm not trying to uninstall and reinstall everything just because it creates more problems...

    Any thoughts? Help!

    Mary Anne

    OK, I uninstalled and reinstalled.  I was not as painful as I expected.

    Works fine now.

    Thank you!!

  • .hp c4280 Solution Center does not open

    Hi all, I have a hp all in - 4280 one machine. My sony computer is running windows vista.  Recently, I found that I could not open the hp Solution Center. I deleted and loaded the software several times but nothing helped. I have had the machine for about 3 years with no problems. I regularly use solution center to choose the details for scanning and printing. Can anyone help

    OK, I did a lot of research on this issue and may be linked to the Adobe Flash's needing to be reinstalled. To do this:

    1. open Internet Explorer (no Chrome or Firefox) and go to: http://get.adobe.com/flashplayer/

    2. download and install the latest version (should be a big download button).

    3. try to open the solution Center.

  • HP Photosmart B110a: Solution Center does not open

    Hi, I am unable to open the solution center to scan, I can print ok and when I run the diagnostic tests and conduct the analysis test, it works well, but unable to do so through any other medium, please help, it's my head.  Thanks in advance.

    Hello

    Thank you for using the forum.

    You can find the solution here:

    http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

    Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

    Windows 10 - How to uninstall & hide updates

    https://goo.GL/3tWxyA

    Hope that helps.

    Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

  • HP Pavilion dv6: HP Solution Center does not open on my computer.

    I use the HP Photosmart Premium all-in-One C410a printer, and until recently the HP Solution Center works very well for scanning, at least most of the time, now, I can't open it to all.

    Also, I keep losing my connection for wireless printing.

    Any ideas.

    I have a HP Pavilion dv6 with Windows 10 Home.

    Thank you and best regards,

    Isoreno

    Hello

    Thank you for using the forum.

    You can find the solution here:

    http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

    Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

    Windows 10 - How to uninstall & hide updates

    https://goo.GL/3tWxyA

    Hope that helps.

    Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

  • HP Solution Center does not work after installing Windows 10.

    After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

    Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

    Or, is there a way to fix it?

    This thread has been locked, for more information on HPPIW, please refer to the following support document:

    http://support.HP.com/us-en/document/c02681060

    HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

    To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

  • I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

    Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

    Hello judieKay

    Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

    Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download drivers and full software features

    C410 Photosmart full feature software (Vista)

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download drivers and full software features

    C410 Photosmart full feature software (Vista)

    10. run the download to reinstall the printer

  • Photosmart 6525: HP Solution Center does not work in Win 10

    I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

    Hello

    The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

    The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

    As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

    http://support.HP.com/us-en/document/c02463264

    Kind regards

    Shlomi

  • HP Solution Center does not work and I can't download it despite many trials

    my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

    Hello todd999

    Try instead these instructions:

    Follow the steps below to rub the software and then reinstall it.
    1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
    2 download the full feature software and drivers
    Photosmart C7250 software (Windows 7)

    3. double-click on the downloaded file to extract the files
    4. once the software install window press Cancel or Exit to close the Setup program
    5. type % temp % in the field run or search programs and files.
    6 find the starting with 7z folder (example: 7zS2356)
    7. right click on 7z file and choose copy
    8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
    9 open the 7z folder
    10 open the Util folder
    11 open the CCC folder
    12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
    13. when the software has been removed, restart your computer
    14. run the Accessories\ System Tools Disk Cleanup
    15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
    I would like to know if you still have the same issues?

  • HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

    I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

    At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

    I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

    I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

    I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

  • Lenovo T420 3.2.002 Solution Center does not display tile system

    Hello

    I have a T420 running Windows 10 with CSL 3.2.002 injstalled. The Solution Center does not show the System tab, and so I can't do anything with it. Any suggestions?

    Yes,

    Lenovo came out with updates and the latest version of the Solution Center (3.0.0.3 from the website) and 3.0.0.4 upgrade all issues resolved.

    Hope this helps.

    See you soon,.

Maybe you are looking for