HP ficejet 6500 All - in - one compatible with Windows 8.1 E709n Wireless?

Similar Questions

• Is the Officejet 7612 A3 e-all-in-one compatible with windows 10

  Hi, I am looking to buy the Officejet 7612 A3 e-all-in-one and I was wondering if it is compatible with Windows 10. Thanks for your help

  Yes

• The Lexmark 6500 series printer is compatible with Windows 8?

  Original title - devices

  The Lexmark 6500 series printer is compatible with Windows 8?

  Check it out here: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home

  You will need to download the drivers for the Lexmark 8 victory if available

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• I have a HP Pavilion all-in-one PC with windows 7 and it has stopped responding.

  Last Thursday, my computer worked fine and Friday it has stopped responding. It will open a Web page in about 20 minutes, even with roadrunner turbo.  Nothing works at all.   I did a virus scan, but I don't know what else to try. Please help me.  Thanx, Shelly

  Shane and shelly

  It's hard to guess, because there is not much information to work with.  I'll give some basic steps you can take to see if it helps. Try to clear the temporary internet files, cache and other things non-essential to your system.    You can do this in the Tools menu, then internet options.  There is a good freeware called CCleanercleaning program. I use it and it found a lot of junk and ignores.  It also cleans the registry for you as well. If your hard disk is very full this could slow down as well. see if there are files you can back off the drive or remove to free up space.  It is also possible that your system is dusty and dirty, and it slows down the processor. Maybe it's time to clean the vents and see if the radiator in the PC is clogged by dust.  Heat can also slow down a PC, especially if it's left on a lot so be sure that it is also well cleaned.

  Hope these tips help you.

• HP deskjet 3070 is compatible with windows 8?

  Is Hp Deskjet 3070 e-all-in-one compatible with windows 8?

  Hello

  Yes, you can find the full feature software and drivers from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5068754#N210

  Concerning

• Compatible with window 7 Ultimate complete HP Pavilion g6-2225tu Notebook PC drivers

  Sir, I need HP Pavilion g6-2225tu Notebook PC all the drivers compatible with Windows 7 Ultimate

  I will be grateful

  Please advice me to go WIN 8)

  Hello:

  All the W7 x 64 drivers of this Associates model should work on yours.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5278312&prodTypeId=321957&prodSeriesId=5226244&swLang=13&TaskID=135&swEnvOID=4063

• 2620 HP printer all in one, is compatible with windows 8

  2620 HP printer all in one, is compatible with windows 8

  Hello Peter,.

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to know if your 2620 HP printer all in one is compatible with your machine Windows 8 or not.

  I wish to inform you that Yes, the printer is compatible with the operating system Windows 8. However, for the installation/configuration of the printer, you can install the latest drivers for your computer using below link:

  HP customer support - Software and Driver Downloads

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-2620-all-in-one-printer-series/5357283/model/5357284

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• OfficeJet 6500 E709n: Failure of 6500 all in one ink system

  Recently inherited a 6500 all in one and installed this AM.

  Everything was going fine until I had to print a test page.

  Error: Ink system failure.

  The manual says disconnect power and reconnect after 10 seconds.  This did not help.

  When I ask to print, it says printing the error message and then it makes a grinding noise - in that order.

  Then an error message appears on my pc computer screen.

  This printer has been moved from one House to the other - it would have something to do with the message or the squeaking noise?

  Any suggestions?

  Thank you for your suggestions.

  I had 2 problems: ink system failure and grinding.

  The solution you provided workd partially - that is to say, I can print now but...

  First of all, concerning the failure of the system of ink - the operating manual supplied with the machine to stop the machine, unplug from wall, waiit 10 sec and reconnect.

  I tried and it doesn't work.

  The ground ' n you provided (from HP for the SAME model as my machine) gave another way to reset the machine - turning machine on, unplug the machine, unplug the unit from wall, wait 15 sec, wall plug, machine to reconnect.  In that order.

  Similar, yet very different and IT WORKED.

  So thanks for that.

  But the machine still makes a grinding noise that lasts about 3 seconds.

  I press print, paper flow, paper comes out of the printer, and then there's grinding hard.

  Back then a series of sounds as if something has been reset.

  All very very different from my previous 960C that is turned on when I printed and do not grind or reset of sounds.

  Clues?

• ePrint HP Officejet 6500 All-in-One-Drucker - E709a

  Hello

  Is it possible to use ePrint with HP Officejet 6500 All-in-One-Drucker - E709a?

  Thanks Chris

  Hi Chris,

  The HP Officejet 6500 (e709a) does not support the HP ePrint service, that you will find listed in the following link:

  http://support.HP.com/us-en/document/c03722645

  Kind regards

  Shlomi

• Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

  I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

  When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

  When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

  The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

  Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

  I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

  My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

  In addition, perform both of these resets and I would like to know how they are!

  All-in-one HP printer reset - HP Officejet 6500 - YouTube'

  Have a great day!

• OfficeJet 6500 all-in-one - black line down page

  Our newly purchased Officejet 6500 all-in-One is the production pages with thin black lines down the page about 2/3 of the way through the page (right side of page).  Is there a solution to this problem?

  This was only happening with ADF.  After several cleanings with no changes, I found this forum.   After reading the plug on the glass, I went back and really clean the glass.  This has allowed the problem.  Thanks for the forum.

• Can someone help me configure HP Officejet 5600 all in one set with windows7 operating system

  How to use HP Officejet 5600 all in one set with windows7 operating system

  I have a desktop HP Pavilion with Windows 7 Edition Home Premium & I want to connect my HP Officejet 5600.
  I get the "not compatible with your operating system" message shortly after insertion & the disc from the printer running. Is someone can you please help me solve this problem. Thank you... Jim

  Everything is now up & running.
  Thank you for your help attempt Distinguished Professor, my 4 step method of resolution is shared as

  According to HP Print and Scan doctor, I have the 5610.   My manual says only 5600

  I just finished successfully installed the full OS & drivers by following these steps.

  First of all, (with the disc of the operating system still in drive E, but not running)

  Connect the printer to the computer and allow it to be recognized and automatically download all the drivers.

  Download 2nd & printing performance HP and doctor Scan http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/forum/printer_diag/&softwareitem=mp-123407-2

  3rd download & run HP printer Install Wizard for Windows7 and 8 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/piw/&softwareitem=mp-122330-1

  Once all this has been ran & finished, my DVD RW Drive E automatically started the drive & added all the options of the printer & features for printer, Scanner, copier & fax. Everything is now up & running.
  Thank you for your help attempt Distinguished Professor

• All of the applications included in eLearning Suite 2.0 are compatible with Windows 10?

  All of the applications included in eLearning Suite 2.0 are compatible with Windows 10?

  Probably not. Certainly not spec'd to work with Windows 10, as 'eLS 2.0' is quite old now and well before the 10 Windows.

  The latest version of eLS is version 6.1, and even programs included with this sequel released before 10 Windows.

  In fact, it looks that they have completely abandoned support for any version of eLS. The post on this forum just before this one, I pointed the user to eLS download page. It controls today, it redirects to the Adobe Captivate page.

  While you might have some programs in eLS 2.0 to work on Windows 10, so he is certainly a risk.

  Flash, Photoshop, and Dreamweaver can work very well under Windows 10 32-bit, but I'm pretty sure that you will have problems with Captivate 4 and presenter.

  And I think that the risk runs even more high under 64-bit Windows 10. Note all programs of eLS 2.0 back to CS4. It is quite old now...

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.