HP G56-130SA LAPTOP: CDDVDW TS-L633N ATA DEVICE

Suddenly, the EJECT command does not work. I had to use a paper clip to open the player. After loading cd and drive of closing, the pc doesn't seem to know that there is a cd in the drive. Double click on the drive a message requires the player to load!

In my opinion there is no communication between the reader and the pc. Please confirm, or otherwise and to advise the right plan of action to address the above. Thanks much for any help.

Advertisement

Hello

I replace the optical drive with a new one and check. Engage with the replacement of the cable connector later.

12.7 mm fixed SATA optical drive: LightScribe SuperMulti DVD±R/RW with Support Double layer

Data sheet:
http://support.HP.com/GB-en/document/c02540068

Manual - page 23, 24: http://h10032.www1.hp.com/ctg/Manual/c02657369

Source: http://support.hp.com/us-en/product/HP-G56-Notebook-PC-series/4247525/model/4326441/manuals

ODD includes bezel and support, HP part number: 620604-001
ODD connector cable is not saved separately, it is included in the cables, so you have to buy that, HP part number: 595201-001

Page 39-41 shows the replacement procedure.

Concerning

Visruth

Tags: Notebooks

Similar Questions

  • HP G60-535DX Notebook PC CDDVDW TS-L633M ATA Device

    I have a HP G60-535DX laptop and Norton has found a corrupt driver: CDDVDW TS - L633M ATA Device.  I uninstalled and tried to find an answer here on HP.COM, but fails.  How can I get a new driver?

    Hello:

    Please read the info at the link below.

    One of the steps in resolution 2-5 should work for you.

    http://support.Microsoft.com/kb/314060

  • Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

    HP Pavilion dv4
    TSST Corp CDDVDW TS-L633L ATA Device

    Control Panel / problem report and solutions
    Problem: Could not load software driver status: sent report

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 64
    Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
    Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 00000013
    Driver name: cdrom.sys
    Driver version: 6.0.6002.18005
    Driver date: 11/04/2009
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Additional information about the problem
    Bucket ID: 619663520

    Control Panel / Device Manager
    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried:
    Update driver software
    Uninstall / find the hardware changes
    Uninstall / reboot / new hardware found
    Properties / verification solutions

    How can I fix it?

    Hello

    Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

    http://support.Microsoft.com/kb/982116

    You have to restart the laptop after that.

    Kind regards

    DP - K

  • Reinstall for TSST corp CDDVDW TS - L633B ATA device

    I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

    I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

    Here is the solution to update your device with the latest driver of Toshiba/Samsung.

    Introductory material.


    1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

    2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

    3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

    4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

    Instructions.


    IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

    1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

    2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

    The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

    3 download the Flash Samsung Standalone utility:

    http://www.samsungodd.com/KorLib/file/tsdnwin.exe

    4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

    Download source: http://ala42.cdfreaks.com/MCSE/

    5 create a folder and name it FLASH and place the following 3 items in the folder.

    SN - S083B_SB02.bin that you have checked out

    Flashing Samsung Standalone utility

    MCSE of Ala42 you have downloaded and extracted the zip file

    6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

    7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

    8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

    9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

    10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

    11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

    12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

    13 after hitting the button enter, the command prompt should read FLASH.

    14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

    15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

    16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

    Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

    When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

    When it finishes installing your drivers, restart the computer once more, and then you're done.

    NOW ENJOY your CD/DVD-RW drive updated.

  • The fatal limit TSSTcorp CDDVDW TS - H653Z ATA Device

    I just hit the limit of CHANGE of REGION in the TSSTcorp CDDVDW TS-H653Z ATA Device. Impossible to change the limit over 4 times and the DVD DRIVE BECOMES USELESS? Integers HP Slimline is worthless to me. I can save the day somehow? Thank you.

    Try to reload the firmware.

    All PC DVD/CD drives have a max of 5 region code change.  You may be able to find a piece of software that will bypass this restriction.

  • How can I write ASCII code on my HP G56-130SA laptop that has no numeric keypad?

    I would like to know if it is possible to write the ASCII code on my laptop because there is no numeric keypad.

    Thanks a lot for your help.

    There is a way, but it is not as easy if a numeric keypad was present.  At least, it was the closest match I could find.

    Go to start, search for character map and open this result.

    You should get a screen like this.

    Scroll through the different characters, highlight a character you want and press select.  In the character of the text box copy, you can copy and paste the character from there to your program of your choice.

    I know that's not ideal, but that's really all that I could find.

    You can also use a USB NumPad as this one.

  • TSST Corp CDDVDW TS-L633M ATA Device

    My cd/dvd-rom does not work! I did all the patches... uninstall it from the Device Manager and restart the computer; delete upper/lower case filters in the registry. Update device drivers; computer brought to the factory settings; Restore at a better time; Reinstall the software; etc, etc, etc! So, in properties, it says my file system is unknown, but in the State of the device it says that my device working properly in my HP Advisor it says my drive (E :) is empty bay... it wont read/write/open/discovery/or do something... Please help will stir crazy!)

    Oh yes, I have Windows Vista and you have not updated my operating system or whatever it is, the last time it worked was two months ago. THANKS :)

    Hello

    ·         You are using a desktop computer or a laptop?

    The issue that you are facing may occur due to the static energy storage in the computer. I suggest a system power cycle and check if it helps:

    1. disconnect any external devices to the laptop.

    2 remove the battery from the laptop.

    3. press the power button of the laptop for 10-15 seconds.

    4. Insert the battery in the laptop and restart the computer.

    5. check if the DVD player works fine.

  • Satellite A200 - TSST corp CDDVDW TS - L632H ATA Device no work

    I'm not the most computer savvy person so I need a little help.

    The device status says:
    + This device cannot start. (Code 10) +.

    It also tells me click + "search for solutions ' +. When I do a pop up appears and says that Windows does not load driver software.

    Any help is appreciated.
    In addition, under Vista.

    Thank you
    Lucas

    This can occur when you install the CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it can load a filter incompatible Vista driver and cause problems.

    Try to remove the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060

  • bad configuration in the registry for a TSST corp CDDVDW SH-S2333C ATA device, how can I fix?

    the computer gives a malfunction code 19.

    IN Dutch "Kan said expensive niet starten configuratiegegevens omdat in het register onvolledig beschadigd zijn. '. (Code 19) »

    Cannot install device because configuration information is corrupted incomplete. How can I fix?

    Hello
    If please see the following thread and follow the steps described in. This should help to solve this problem.

    http://support.Microsoft.com/kb/314060

    I hope this helps. Just reply to the results.

  • HP cddvdw ts-h653r ata device driver error

    I can access is no longer my DVD player.  Looking at the Device Manager, it says there is a problem, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Where can I find the device driver for this drive?

    Hello

    Please use this:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Kind regards.

  • Where can I download a driver 64 bit Windows 7 for hp CDDVDW TS-L633N on my cpq60-615DX

    EDIT-

    I forgot to say that I tried to update the driver from the Device Manager device window and the result was a message saying that it could not find a newer driver, installed was correct.

    Another EDIT

    Also, I don't say that I uninstalled the device through Device Manager. After the system restarts, the drive was found and software installed but the problem remains.

    --------------------------------------

    Original message follows:

    System: CPQ60-615DX

    Windows 7 Home Premium 64-bit

    Drive: hp CDDVDW TS-L633N

    Installing Roxio software, Creator 9, a driver unusable, are part of one, has been installed. Now that the device does not work.

    When I see him on the list of devices on Windows Explorer, I went to the Manager of peripheral and found it was marked with the 'problem' icon (exclamation mark on a yellow background).

    In the general tab device status box.

    A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

    The following information is displayed for the device:

    HP CDDVDW TS - L633N ATA Device Properties windo

    Driver tab:

    HP CDDVDW TS-L633N ATA Device

    Driver provider: Microsoft
    Driver date: 21/06/2006
    Driver version: 6.1.7601.17514
    Digtal signer: Microsoft Windows

    Driver file details:

    HP CDDVDW TS-L633N ATA Device

    Driver files: c:\Windows\system32\Drivers\cdrom.sys

    Provider of: Microsoft Corporation
    File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
    Copyright: Microsoft Corporation. All rights reserved.
    Digital signer: Microsoft Windows

    c:\Windows\System32Drivers\PxHlpa64.sys

    Supplier: Sonic Solutions
    File version: 2.03.27a
    Copyright: Copyright 2003 Sonic Software
    Digital signer: not digitally signed

    It seems that the creator installation installed the driver but not one that works. It could be a problem with Windows 7, or the fact that this facility is 64-bit.

    I searched HP website and cannot find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not displayed.

    I downloaded and installed the program to search for the driver HP - or whatever we call it - and he ran. There are no devices listed in tab "Optical Drive" when I looked at the results - he could not 'see' the reader.

    I realize that what I need is probably a generic driver of MS, it is why it is not displayed on the HP site, but how do I find the right one for this unit?

    Is there a generic 'one size fits all' driver for Windows 7 which can fly this aircraft?

    Any help will be greatly appreciated.

    Bob and Simon

    I fixed it.

    I hate when someone post a problem and then when they fix what they post only - it - fixed with no details.

    Here is how he is now.

    Installation, I tried a Sonic product install a driver that is not compatible with Windows 7 64 bit.

    I tried several fixes and the problem remains.

    I then started a search on the name of the driver file Sonic showing details of the driver for the device - PxHlpa64

    I found this page - http://forum.slysoft.com/showthread.php?t=34118

    Scroll through the text (or search for it)

    Remove the problematic filters of your registry:

    2.

    1. create a backup of your registry. See here for how to do it.
    2. download ImgBurn (freeware).
    3. launch ImgBurn and go to tools > filter driver load order...
    4. Select "PxHlpa64". Click to remove the selected filter. Select "ASAPIW2k." Click 'delete the selected filter '. Click OK.
    5 reset.

    I had already installed ImgBurn (it's a great piece of software for CD/DVD that will do anything - it isn't a ripper, it is a CD/DVD burning tool)

    I have the poster said to do and when I rebooted the system, the problem was gone.

    Bob

  • Driver for Hp cddvdw TS-l633n drive.

    I need to find another driver for HP cddvdw Ts-l633n road that came in my laptop.  I am running windows 7 64.  The driver of this window provide does not work when you try to burn with nero10.  Anyone know where I can find a driver HP?  Thanks for your help.

    Hi Critter1919,

    Critter1919 wrote:

    I need to find another driver for HP cddvdw Ts-l633n road that came in my laptop.  I am running windows 7 64.  The driver of this window provide does not work when you try to burn with nero10.  Anyone know where I can find a driver HP?  Thanks for your help.

    What is the product name of HP laptop that you own?

    Your DVD player should work easily without any software of creation of CD/DVD media without problems. If not then you may have a registry problem or a hardware problem.

    Best regards

    ERICO

  • HP CDDVDW TS-L633N: CD/DVD does not

    Device CD/DVD (HP CDDVDW TS-L633N) is not able to read any CD or DVD; System: CQ56; OS: Windows (32 bit) 10

    Hello:

    See if you perform the steps described in resolutions 3 and/or 5 from the following link get the DVD player to work.

    https://support.Microsoft.com/en-us/KB/314060

  • My laptop Inspiron 1420 PBDS DVD +-RW DS - 8W1P ATA Device failed... What is the solution?

    My laptop Inspiron 1420 PBDS DVD +-RW DS - 8W1P ATA Device failed... What is the solution?

    I'm not very good w / computer stuff... appreciate any guidance or advice in simple terms. Already did system restore, tried to uninstall/reinstall, but still not ok...

    Moreover, already done BIOS diagnostics/reboot... still persistent.

    When I click on the device mngr, properties, under the State, he said:

    This device cannot start. (Code 10)

    I did the above process several times already

    ???

    Message edited by cyke_jene on 06/25/2008 08:42

  • Re: Toshiba DVGW/hd ts-l802a ata device issues

    Well, I'm not sure what happened, but between last week and this week, when I insert a CD or DVD in my laptop, it does not read them. In my device manager, there's a little warning! symbol "Toshiba DVGW/hd ts-l802a ata device" under CD-ROM/DVD-ROM drives. It shows this message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I don't know if I uninstalled something by accident, or if it is another problem entirely. Can someone please tell me what to do? I want to be able to play movies on my computer again!

    Thanks in advance!

    Hello

    What operating system do you use?

    If you are using Vista, please check http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

Maybe you are looking for

  • Satellite P750-13F - Internet (download) bandwidth slows

    Hello. (Windows 8 x 64, P750-13F, HDD: Hitachi, wifi: Atheros) installed the latest drivers from toshiba. Recently, I noticed that: (via WiFi) does not check for cable again. While installing an application or copy files to HDD - my download down (uT

  • Error "NTLDR is missing" in the Windows XP computer.

    Origianl title: htldr__ I have windows xp. on startup, I get the error message "htldr is missing". Help, please

  • HP Pavilion G6 1356-el; CPU and card mother temperatures

    Hi, I am a happy owner of this laptop great, but I have a question: when I play videogames temperature is about 70, even 80 °, talk about the (2450 m i5) CPU and motherboard. What is normal and safe, your should I need to worry and buy a basement of

  • Computer running slow even after the factory restore

    OK I'll try to summarize the best that I can about it. I own a Toshiba U405D 1 1/2 years, delivered with a pre-installed version of Vista Home Premium. Not a SINGLE PROBLEM NEVER, until some time late last week. All of a sudden (and I mean that), Win

  • Halo Spartan Strike - MSCVP110.dll

    Hello I recently installed strike Spartan Halo on my windows computer 8. When I try to open the game from the shortcut on the desktop, I get the error message " this program cannot start because MSCVP110.dll is missing on your computer. "Try to reins