HP g6-1b60us: my computer hp g6-1b60us laptop does not light.

Similar Questions

• Computer HP dm4-1160us laptop - does not work - has a white when turned on screen.

  Computer HP dm4-1160us laptop does not work - it has a screen white when turned on.

  See this page for "no starup" advice, if none of these tips help, the laptop will need professional diagnosis.

  Go to this page, select "Error Messages displayed on the computer"

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=43716&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4308941

• Computer HP pavilion dv6500 laptop does not read or play media, error code 31

  I have hp pavilion dv6500 laptop, - my dvd do not read or play - I went to Device Manager and opened it and it says the drivers required for this device-code 31.le how to fix it, please

  * original title - adapter #4-31 the code *.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• my computer compaq presario cq56 laptop does not recognize my usb drive hp usb flash drive v195b

  I have a lot of problems with flash drives and card readers that plug about my ports detected usb, I just buy a new drive 16 GB flash (HP) as above is said on this plug and play, but when I plug it I can't, there is no prompt and if I remove usb it doesn't show there either I have about six card readers and they worked when I used them first, but now I think that there is only one that works. Can you help me please?

  What a fool I am, because the new style of USB is a solid piece, it allows you to put it in the wrong way round, which is what I did, but your help led me to the solution. Thank you very much

  Ian.

• Computer Dell laptop does not light

  I have a Dell inspiron 15, that does not illuminate. I tried to take out the battery and pressing the power for 30 seconds, did not help. Called customer service, they said maybe the motherboard, but they don't have any that match my laptop and the warranty is expired.

  Any other suggestions? Thank you

  Hi VICIOUSVIC,

  Please write to us.

  Please private message us the serial number of the system as well as your login email.

  (Note: Please do not mention the id of service tag or by e-mail on the public forum because it contains your personal information).

  Kind regards
  DELL-Loïc M
  Professional community and social media
  #IWork4Dell

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion dv9810us: computer HP Pavilion dv9810us laptop will not start

  Reminder: a few days before my laptop does not start up, all using the laptop, the screen has become, I guess the technical term would be 'nuts': horizontal lines an inch in height, made of blocks quickly black and white, all changing left and right, and I could see my spreadsheet in the background.  Could not do something about the problem, so I rebooted and it worked fine.

  Then a few days after that, I tried to turn on my laptop, and occurred the following:

  (1) blue illuminated switch, control all the keys lit in blue (volume, skip, repeat, DVD...), fan began and heard the dvd begins to check for a disc.  This lasted for about 2 seconds.

  (2) off laptop (all lights extinguished, no fan noise or a dvd).  This lasted for about 5 seconds.

  then it would just repeat steps 1 & 2 times: start 2 seconds, stop for 5...

  Steps that my work to correct (without success):

  -J' I disconnected and removed the battery.  Let stand a few minutes.  After I have inserted the battery and reconnected, I pressed the power button.  Same 2 steps as shown above (lit for 2 seconds, turn off for 5, repetition) happened.

  -saw a post on the site of HP on a hard reset.  so I unplugged, removed the battery, which is held from the Start button / stop for 20 seconds.  then replugged (without inserting the battery) and power on.  Same 2 steps above happened (lit for 2 seconds, off for 5, repetition...).

  -J' I reset memory as someone on the HP Board has suggested:

  (1) remove the two memory, then replace both in the correct order.

  Result: same problem (2 seconds 5 seconds, repeat...)

  (2) remove the top memory (1 GB), bottom (2 GB) by leaving in place.

  Result: same problem...

  (3) place 1 GB memory on the bottom, nothing over the top.

  Result: same problem...

  From the above information, no idea what the source of the problem is, and how to fix it?

  It would be to remove the motherboard and "re-invest" the video chip with a heat gun. Configure you with a shield from sheet aluminium with the chip pushing through like dessert in a TV dinner. There are many tutorials online, but like anything else go you better the more you do and the first time is risky. Repair shops using a better process called "reballing", which is basically rebuild the chip and requires hardware, that no individual can afford to have.

  Access to the old hard drive is easy. Physically, remove it from the machine.

  https://www.YouTube.com/watch?v=B3tAGVzCS7w

  See 02:20 in. You must remove the plastic adapter for in standard SATA ports. You can leave it in the basket after removing the plastic adapter bar. Then use a usb to SATA adapter and you can plug the old drive on USB ports on your computer again, and it will appear as a USB key where you can copy and paste things out of it to the new PC.

  http://www.Amazon.com/STARTech-com-SATA-drive-adapter-cable/DP/B00HJZJI84/ref=sr_1_1?ie=UTF8&QID=1432146725&SR=8-1&keywords=USB+to+SATA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
  kindly help

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  Original title: USB device not recognized / dysfunction

  "Unrecognized USB device".
  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

  This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

  Open recognition of the USB device by using Device Manager.

  .. I am at a loss: P please help thanks!

  isable the power management of the USB hub and I couldn't find the

  Hi LadyDefi,

  You can try to uninstall and reinstall the USB controllers and check:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and test to make sure that the problem is solved

  For more information, see the following article:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP