HP G60-535DX Notebook PC CDDVDW TS-L633M ATA Device

I have a HP G60-535DX laptop and Norton has found a corrupt driver: CDDVDW TS - L633M ATA Device.  I uninstalled and tried to find an answer here on HP.COM, but fails.  How can I get a new driver?

Hello:

Please read the info at the link below.

One of the steps in resolution 2-5 should work for you.

http://support.Microsoft.com/kb/314060

Tags: Notebooks

Similar Questions

  • TSST Corp CDDVDW TS-L633M ATA Device

    My cd/dvd-rom does not work! I did all the patches... uninstall it from the Device Manager and restart the computer; delete upper/lower case filters in the registry. Update device drivers; computer brought to the factory settings; Restore at a better time; Reinstall the software; etc, etc, etc! So, in properties, it says my file system is unknown, but in the State of the device it says that my device working properly in my HP Advisor it says my drive (E :) is empty bay... it wont read/write/open/discovery/or do something... Please help will stir crazy!)

    Oh yes, I have Windows Vista and you have not updated my operating system or whatever it is, the last time it worked was two months ago. THANKS :)

    Hello

    ·         You are using a desktop computer or a laptop?

    The issue that you are facing may occur due to the static energy storage in the computer. I suggest a system power cycle and check if it helps:

    1. disconnect any external devices to the laptop.

    2 remove the battery from the laptop.

    3. press the power button of the laptop for 10-15 seconds.

    4. Insert the battery in the laptop and restart the computer.

    5. check if the DVD player works fine.

  • Reinstall for TSST corp CDDVDW TS - L633B ATA device

    I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

    I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

    Here is the solution to update your device with the latest driver of Toshiba/Samsung.

    Introductory material.


    1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

    2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

    3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

    4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

    Instructions.


    IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

    1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

    2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

    The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

    3 download the Flash Samsung Standalone utility:

    http://www.samsungodd.com/KorLib/file/tsdnwin.exe

    4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

    Download source: http://ala42.cdfreaks.com/MCSE/

    5 create a folder and name it FLASH and place the following 3 items in the folder.

    SN - S083B_SB02.bin that you have checked out

    Flashing Samsung Standalone utility

    MCSE of Ala42 you have downloaded and extracted the zip file

    6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

    7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

    8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

    9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

    10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

    11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

    12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

    13 after hitting the button enter, the command prompt should read FLASH.

    14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

    15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

    16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

    Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

    When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

    When it finishes installing your drivers, restart the computer once more, and then you're done.

    NOW ENJOY your CD/DVD-RW drive updated.

  • CDDVD TSST CORP TS-L633M ATA DEVICE DRIVER DOES NOT

    OK so I went on the website of windows (http://support.microsoft.com/gp/cd_dvd_drive_problems) and downloaded and ran the program that makes it surprisingly found the problem and tried to fix it but in doing so, I got a message from PILOT of FACILITIES of SOFTWARE developed in the taskbar that says that it not to repair the failing TSST CORP CDDVD TS - L633M ATA DEVICE driver. So now that it is said "Please consult the manufacturer of your device for help to get this installed device." who should I contact?

    -J' have a HP PAVILION DV6 121 6SA

    Hi Woody94,

    TSST CORP stands for Toshiba Samsung Storage Technology Corporation. This pagehttp://www.tsst.co.kr/korea/en/techinfo/svccenter.php gives a map of service centers around the world. You will probably find an email from support by placing the center of service to you.

    If not, have you contacted HP support to see if they can help? http://WWW8.HP.com/UK/en/contact-HP/contact.html This link is to HP support to the United Kingdom. If you are in another country, just visithttp://www.hp.com and check the support pages or contact pages. You can also consult the user's guide for your PC to see if support details are included here.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

  • The fatal limit TSSTcorp CDDVDW TS - H653Z ATA Device

    I just hit the limit of CHANGE of REGION in the TSSTcorp CDDVDW TS-H653Z ATA Device. Impossible to change the limit over 4 times and the DVD DRIVE BECOMES USELESS? Integers HP Slimline is worthless to me. I can save the day somehow? Thank you.

    Try to reload the firmware.

    All PC DVD/CD drives have a max of 5 region code change.  You may be able to find a piece of software that will bypass this restriction.

  • Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

    HP Pavilion dv4
    TSST Corp CDDVDW TS-L633L ATA Device

    Control Panel / problem report and solutions
    Problem: Could not load software driver status: sent report

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 64
    Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
    Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 00000013
    Driver name: cdrom.sys
    Driver version: 6.0.6002.18005
    Driver date: 11/04/2009
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Additional information about the problem
    Bucket ID: 619663520

    Control Panel / Device Manager
    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried:
    Update driver software
    Uninstall / find the hardware changes
    Uninstall / reboot / new hardware found
    Properties / verification solutions

    How can I fix it?

    Hello

    Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

    http://support.Microsoft.com/kb/982116

    You have to restart the laptop after that.

    Kind regards

    DP - K

  • TSSTcorp CDDVDW TS - L633M ATA drivers needed

    My dvd drive has stopped working so I uninstalled in Device Manager and then restarted and it can not find drivers to reinstall.

    I also do not find anything on the internet.

    TSST is obscure.

    the samsung live update tool does not work (I read that it was the tool to use)

    Someone help?

    I have presario CQ61 223SA

    See you soon

    All fixed. Had to remove the upper and lower filters in the registry

  • HP G56-130SA LAPTOP: CDDVDW TS-L633N ATA DEVICE

    Suddenly, the EJECT command does not work. I had to use a paper clip to open the player. After loading cd and drive of closing, the pc doesn't seem to know that there is a cd in the drive. Double click on the drive a message requires the player to load!

    In my opinion there is no communication between the reader and the pc. Please confirm, or otherwise and to advise the right plan of action to address the above. Thanks much for any help.

    Hello

    I replace the optical drive with a new one and check. Engage with the replacement of the cable connector later.

    12.7 mm fixed SATA optical drive: LightScribe SuperMulti DVD±R/RW with Support Double layer

    Data sheet:
    http://support.HP.com/GB-en/document/c02540068

    Manual - page 23, 24: http://h10032.www1.hp.com/ctg/Manual/c02657369

    Source: http://support.hp.com/us-en/product/HP-G56-Notebook-PC-series/4247525/model/4326441/manuals

    ODD includes bezel and support, HP part number: 620604-001
    ODD connector cable is not saved separately, it is included in the cables, so you have to buy that, HP part number: 595201-001

    Page 39-41 shows the replacement procedure.

    Concerning

    Visruth

  • Satellite A200 - TSST corp CDDVDW TS - L632H ATA Device no work

    I'm not the most computer savvy person so I need a little help.

    The device status says:
    + This device cannot start. (Code 10) +.

    It also tells me click + "search for solutions ' +. When I do a pop up appears and says that Windows does not load driver software.

    Any help is appreciated.
    In addition, under Vista.

    Thank you
    Lucas

    This can occur when you install the CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it can load a filter incompatible Vista driver and cause problems.

    Try to remove the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060

  • bad configuration in the registry for a TSST corp CDDVDW SH-S2333C ATA device, how can I fix?

    the computer gives a malfunction code 19.

    IN Dutch "Kan said expensive niet starten configuratiegegevens omdat in het register onvolledig beschadigd zijn. '. (Code 19) »

    Cannot install device because configuration information is corrupted incomplete. How can I fix?

    Hello
    If please see the following thread and follow the steps described in. This should help to solve this problem.

    http://support.Microsoft.com/kb/314060

    I hope this helps. Just reply to the results.

  • HP cddvdw ts-h653r ata device driver error

    I can access is no longer my DVD player.  Looking at the Device Manager, it says there is a problem, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Where can I find the device driver for this drive?

    Hello

    Please use this:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Kind regards.

  • G60-535DX

    I have a HP G60-535DX laptop. I want to add more memory that it has now 3.00 GB, more large hard drive has 596 GB and a better processor now has t4300 @ maybe of 2.10 GHz Pentium dual-core more than memory would be the best help for her and a better hard drive? It's ok, but slow

    would it not be cheaper to buy a new laptop.  IHAVE windows 7 Home premium 64-bit os?  Any help would be nice!

    This is the page for crucial.com for your model. Unfortunately, it uses the older DDR2 memory, and 4 concerts looks like $70. The latest DDR3 would be half that.

    http://www.crucial.com/store/ListParts.aspx?model=HP%20G60-535DX

    You can find some great laptops sales after Christmas. The first thing to consider is what screen size you want. I suggest a 15.6 for general use for a laptop that is moved only occasionally. If it would serve only to the House, I would say even a 17 inch since demand for big laptops dropped and are some of the best deals on laptops 17 inches.

    This one:

    http://shopping.HP.com/en_US/Home-Office/-/products/laptops/HP-Pavilion/E1K49AV?HP-Pavilion-15z-N100-notebook-PC-energy-star-

    Or this one:

    http://shopping.HP.com/en_US/Home-Office/-/products/laptops/HP-Pavilion/E2G79AV?HP-Pavilion-17Z-e100-notebook-PC-energy-star-

    For use general, you can't beat one and my guess is that the price is still down after Christmas.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP G60-535DX: video card drivers

    Are there other ulternative for HP G60-535DX video card drivers on 01:00 who is Mobile Intel (r) 4 Series Express Chipset Family that does not work when I try to generate graphics images 3d, architect Chief Software?

    Hello

    You cannot use different drivers for the graphics card you have

    > chk in the factory for any upgrade Web site, you can

    > installing bad drivers are at risk of not not the disk or it may not work as well

    I work on behalf of HP
    Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.
    Click the right to say 'Thank you' for helping on Bravo 'Thumbs Up'!

  • Engraver of CD/DVD TSSTcorp CDDVDW TS-L633M 0200 (ATA) fails on all brands of CD

    I had problems with my CD/DVD burner for years.

    My laptop is a "Pavilion dv7t-2000", P/N: NB406AV.
    I am running Windows Vista Home Premium 64-bit version.

    The CD/DVD writer on my laptop is a
    TSSTcorp CDDVDW TS-L633M 0200 (ATA).

    In the past every time I burned a CD, the CD would defects in one or more tracks.
    Sometimes the burning application would indicate that there are errors when writing
    and I would just take this CD and insert a different CD.

    Lately, this failure of writing happens much more often, but more often than that.
    the application hangs up during the writing of the directory on the CD.  "Cancel".
    button never works and even an "end task" from the Windows Task Manager.
    results in "the program does not.  On a stack of 50 Memorex CD - R CD,.
    44 failed, and the 6-CD which created a CD audio with success, all had obvious
    defects that jumps then read.  I bought a stack of 30 Sony CD - R
    CD 9 of the top 10 failed with the same problems and the successful single
    Burning audio CD produced audio flaws similar and jumps.  Rather than waste more
    CD, I started to look for other causes.

    I searched the CD write failures and found Memorex and other Web pages that lists all of
    compatible with its CD CD burners and my CD/DVD writer is not yet listed-
    This implies that their CD products do not work with my burner that came with my laptop.

    http://Support2.Imation.com/downloads/IMN/optical/compatibility/CDRCompatibility.PDF
    http://Support2.Imation.com/downloads/IMN/optical/compatibility/4XCDRWCompatibility.PDF
    http://Support2.Imation.com/downloads/IMN/optical/compatibility/10XCDRWCompatibility.PDF

    How can I get a replacement of CD/DVD reader/writer who settled in my HP laptop
    It is also compatible with the discs, CDs and DVDs currently available products today?

    -East-HP sells a replacement burner?

    -How much does it cost?

    -What phone number can I call to order?  (I have installed it locally.)

    Thanks in advance.

    Here's a selection of what is available to replace the laptop disks.  Choose a

    Unless the laptop has an unusual provision, most people should work.

  • HP G60-535DX Windows 7 Home Premium internal Microphone Inaudible

    I have problems with the internal microphone located at the top of the screen on the laptop of HP G60 PC, pre-loaded with Windows 7 Home Premium operating system.  All OS, PC drivers and system ROM was updated to the current.

    The sound it produces is at best barely audible or usually completely inaudible.  This is true when using the internal Sound Recorder app as well as when I try to use Windows Live and Skype for audio or video calls.  The fact that it has in this way by using Sound Recorder proves that this has nothing to do with firewalls or latency of the internet.  Also, I can hear and see people that I am trying to contact very well.

    I first noticed the problem on a system HP G60t that I bought at hpshopping.com in early December 2009, which was a version customized and delivered to me.   I opened a case with assistance and they told me I have to ship it for repairs or I could just return it.  I returned it.

    Thinking that I was just unlucky enough get a bad system, then went to Best Buy in late December 2009 and bought a second HP G60, this time above a G60-535DX, which has been configured in the same way.  Guess what?  Exactly the same problem.

    I did research on these HP support forums and the comments posted at bestbuy.com for the HP G60.  It seems that a lot of people have the same exact problems.  I tried all of the suggestions I've found, including the following, but nothing changes because of the quality of the microphone on two separate HP G60 books purchased from the point of sale / inventory is extremely poor and essentially non-functional.

    1. ROM and HP drivers update
    2. Updated software Windows
    3. Uninstalled Conexant Pebble high definition SmartAudio driver in the device, and then reinstalled Manager
    4. Battery disconnected and removed, you press power for 60 seconds, winding
    5. Adjust the parameters property of the driver Conexant Pebble high definition SmartAudio, including change the Format by default, exclusive Mode and the Signal accessories settings

    Someone at - it any other ideas?

    What HP?  If you go to the home page of official support for the HP G60-535DX, the second ranked FAQ is titled "Don't fix no audio or audio in Windows 7", whey discuss the microphone settings.  HP monitor the number of systems having the same problem, recognize a default configuration and put a notice or a reminder?  I know I could return just this system.  But I prefer that it works.

    Does anyone have this working properly?  Is it just luck of the draw?  Thanks for any ideas or suggestions, including how empower us HP for resolution.

    New update as of April 13 *.

    You may have experienced better quality microphone if you have installed the latest audio driver Conexant SP47803 published March 10th. But if the drivers Conexant High - Definition SmartAudio Driver (version 4.98.60.50 (A) has not resolved your concerns we would like you to contact HP by calling a service HP (1-800-hp-invent) they have another option to help you.

    --------------------

    You have requested to be informed when and if a new driver is available, please see the information below and let us know what your experience is with the new driver, with the built-in microphone and the USB microphone, you opinion counts, thank you.

    Some improved microphone quality can occur if you install the latest audio driver Conexant SP47803, released on March 10.

    You can download and install the latest audio driver using one of the following options.

    • The Conexant High - Definition SmartAudio Driver (version 4.98.60.50 A) is available with the instructions for installation and download at the following link:

    Download page for Conexant High - Definition SmartAudio driver

    • The Conexant High - Definition SmartAudio Driver (version 4.98.60.50 A) is available as an executable (.exe) from ftp.hp.com at the following link:

    Executable link to FTP for the Conexant High - Definition SmartAudio driver

Maybe you are looking for

  • IPhone serial number 7 not recognized

    Just got an iPhone 7 ordered on Apple Store.  Pay for the care of Apple.  Phone is happened, but nothing about the Apple Care.  Tried to confirm the status of the warranty by Apple support, but could not get support because it will not recognize the

  • Ring of the exercise went haywire

    for two weeks, the exercise on my Apple Watch ring was very erratic, count the exercise that I did not just not... I also noticed that the movement has stopped ring inscription calories as it used to? I thought to reset, but don't want to lose all th

  • Driver for Dell 3100cn el capitan

    Hello I guess I can use PostScript for IP base for my Dell 3100cn color laser printer network on my new macbook pro El Capitan 10.11.2 but is there a more specific? I use the installer of MFP color Dell 1355 by the suggestion of someone. BTW, how to

  • Windows Update error codes: 00000646, 8024402C, 80070422, 80244019, 8DDD018 and 80070643?

    HP laptop (pavilion dv2000) Vista os - bad began last Dec

  • Photosmart HP 7520: photosmart 7520 printer all-in-one fell my SSID wireless

    My photosmart 7520 worked well until a few days ago.  It has stopped printing.  Wireless test report I am not connected.  I tried the wizard wireless set up to get reconnected but my wireless router number has disappeared from the list.  I typed it i