HP g61 - 329 ca show power button

Similar Questions

• the Power button lockout

  My HP2009f monitor showed power button lockout when I press the power button, I can be the way to solve the problem?

  Just hold the power button about 30 sec.
  This blocking activates / deactivates.

  C.

• Pavilion 23xi: my hp Pavilion keep showing the power button lock I tried all the solutions again, it won't work

  Hp power button held for a minute and the cord broke off electricity by holding down the power button and it's always the same problem in not falling is not on what can that I please

  The button lock feature works / stop is set by pressing the power button for 10 + seconds.  It is deactivated again by pressing the power button for 10 + seconds.   That's all there is to it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

  I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

  Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

  HI @WayneCM,

  Thank you for your inquiry. I will do my best to help you!

  I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

• Pro 3 yoga and Hibernation power button

  Hello

  I have a problem with turn on the laptop after that it goes the way standby mode Hibernate (no doubt).

  Since the beginning, I installed Win clean 10 with the latest drivers of Yoga.

  Now when I put the Yoga sleep (power button flashes) and after an hour or so later Yoga switch to hibernation (power button stops flashing) I cannot wake it up by pressing the power button. Instead, it shows the Lenovo logo and turns off by itself. After that it works in a normal way - by pressing the power button / stop lights but don't relax after previous hibernation.

  Can someone help me with this problem? It is quite annoyng. This means that I always have to save all my work before Yoga put to sleep.

  Thanks for any help.

  Finally, I managed to solve the problem with the power button. I had disabled setting Fast Boot under windows, and everything works as it should.

• HP DV6 6115TX UP STARTS NOT WHEN I PRESS THE POWER BUTTON / STOP NOTING HAPPENS

  LAPTOP: HP DV6 6115TX

  1. WITH THE BATTERY AND CONNECTED AC-

  WHEN I PRESS POWER BUTTON NOTHING HAPPNS ONLY INDICATOR LIGHT NEAR THE POWER SUPPLY BECOMES WHITE AND STAYS ON UNTIL I HAVE TO REMOVE THE BATTERY.

  2. WITH THE BATTERY ONLY

  WHEN I PRESS POWER BUTTON NOTHING HAPPNS ONLY INDICATOR LIGHT NEAR THE POWER SUPPLY BECOMES WHITE AND STAYS ON UNTIL I HAVE TO REMOVE THE BATTERY.

  Hello @HPDV6-6115TX ,.

  Welcome to the HP Forums!

  I understand that you laptop is not turning on.

  If the laptop has no power, other than the AC adapter connection indication, there is little that can be done.

  The adapter ring is HQ shows a white LED would suggest the adapter supply fine and offer pay-per-view mother, or at least the internal power connector. This means it is a flaw in the motherboard of the laptop and most likely requires a repair.

  You will want to check that the RAM and HARD drive are in place and connected, as well as internal power cable. You can do it by following your product Maintenance & Service Guide.

  HARD drive: Page 62.

  RAM: Page 66.

  Power cable: Page 83.

  If it does not, you will need to contact the HP support by phone for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Hope this helps!

• power button will affect the performance of the system

  Mr President.

  I was forced to use the power button to turn off my laptop HP 2231tx G6 in certain circumstances. I would like to know if this will affect all my gear system & impact on its performance. Because mine is only a new system.

  Using the power button to turn off the computer will not affect the system hardware or your computer's performance. It can, however, lead to the system indicates that it "didn't stop in properly" and may require the system to the performance of a hard disk check before starting entirely. In addition, you can lose data by turning off the computer by this means.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Acer Switch 10 i. put powered w / power cord, power button + volume Up/Down ii. No LED light

  Problem:

  Power does not illuminate. 75% battery charge. A tried
  a. power switch button
  b. power button + volume Up/Down button for 60 seconds (technique of being able to be in hibernation mode)
  c. a/c power cord... light to show load or power not turn on AND the Tablet does not become hot... in other words, Tablet accepts no power coming from being plugged into an electric outlet

  Solutions to be able to put it back on

  1. perhaps central card mother battery died... Well, in the past my LAPTOP would work with single power supply and no battery... but... it is a tablet that works maybe like a mobile phone because if the battery is dead, then unit does not work until the Central battery has sufficient charge

  2. maybe an electrical circuit problem?

  3. may reset a deep sleep mode?   ... but already there is a technique of this situation and I tried it.

  4 perhaps, software power settings but if are unable to start. can't get to the BIOS.

  Thanks much for any help.

  Solution... it was an electrical problem, capacitor w / low-Volt charge had gone below this threshold to function, voltage decay over time.  Replaced.  Laptop as it has done before does not.

• BlackBerry Z30 power button broken for a BlackBerry Z30 purchased on amazon.co.uk

  Hello BlackBerry community,

  I use a BlackBerry Z30 I bought from amazon.co.uk. I'm super excited with the device, in terms of ease of use, performance, and independent living.

  Unfortunately, the device fell off the table and the power button was broken.

  Any idea where I can buy a spare - button / stop? Unfortunately amazon.co.uk is not available.

  With many thanks,.

  Dimitris

  Yes, it looks like the part you need as shown on the last picture shows the power button

• I switched on the power button, laptop did not turn. Why?

  I bought a new laptop 8 months ago and worked perfectly until this morning. As I switched on the power button which showed blue as usual but the screen was black and is not alive.  He just lights up not despite the power button light on.what went wrong?  Then I removed the battery and then turned it on and it started. Please, someone tell me what was wrong despite the fact that it works very well and how can I solve this problem.

  It sounds like a hardware problem, you should consult your computer manufacturer on.  Maybe it's just a bad battery, but since it's only 8 months, it should still be under warranty.

  Good luck.

• my laptop stops automatically and randomly and start again after pressing the power button / stop

  Hello

  my laptop stops automatically and randomly and restarts after pressing power button.my pc running windows 8 version of system.can you please solve this problem.

  Hello

  Check if the quick start option is enabled, your laptop. Here are the steps:

  1. open the Power Options window. Use one of the following methods:

  A. press the WIN + R keys at the same time to launch the Run dialog box. After that, type powercfg.cpl , and then press enter.

  B. press the WIN + X keys at the same time to launch WIN + X Menu. After that, select Power Options.

  C. the Start screen and the Windows of type power will show the results, select the Power Options.

  2. click on settings , then choose change how the power buttons.

  3. scroll down and look for turn the (recommended) quick start under stop settings.

  4 uncheck the checkbox, and then click save changes.

  Note: if the option has said isn't here, scroll down and select change settings that are currently unavailable to change.

  5 restart your laptop.

  Let us know how it goes.

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka

• Monitor power button stuck or broken

  1908FP 2407WFP and probably many other models

  I have 7 or more Dell monitors and just got my first broken power button today. After disassemble and see the very fragile plastic piece, I am happy that I regularly let sleep instead of using the button. The 10-cent plastic piece is made very thin and flexible, and the actual switch is not directly behind the button (they are all other buttons), but moved to the side to make room for a LED. For this, the plastic, the button bow severely whenever it's pressed. In my case, the button has lasted a few years before the tabs broke the key at both ends showing how fragile, it had become. Firm pressure could probably break it even when new. Because the tabs are so small, the only realistic "repair" is to remove the broken button, use something to push the switch and allow him to sleep. The button band could easily be replaced if only someone could sell them.

  Found similar posts on this forum & youtube

  tclarke,

  We have a monitor of components such as the power button. Simply, we replace all under warranty. You might find someone on ebay selling components to monitor.

• Inspiron laptop power button: LED backlight?

  I have a new laptop Inspiron 5758. When I press the power button on this topic, the power button does not, even if there is a small translucent band on it designed to show the light from an LED behind it.

  At work, we have a few new laptops Latitude 15 and their power buttons lights up when you press.

  A Dell technical support person told me that the Inspiron buttons power lights don't hurry; the single LED on the system is a forward on the half lower case which serves as an indicator of activity combination of load and disk.

  The tech support person gave me specific information?

  There is no led on or around the power on button.

• My his laptop makes a beep when I press the power button / stop and it does not start

  Hello

  I bought a new Dell Inspiron 15z touch ultrabook and when I pressed the power button, it starts to beep and won't start. The screen is totally blank. What should do? Help, please

  -Mayur gala

  Hi Mayur,

  Welcome to the community,

  Sound signal can be used as a diagnostic indicator. The computer may emit a series of beeps at startup if errors or problems. This series of beeps identifies a problem and is called "beep code".

  See the table below which shows the beep codes and the possible problem:

  Overview of beep Code
  Beeps	Description	Possible cause
  1	ROM BIOS checksum failure	The map system, covers BIOS corruption or errors ROM failure
  2	No memory (RAM) detected	Memory or memory slot failure
  3	Chipset error (North and South Bridge error) Time-Of-Day Clock test failure Gate A20 failure Super i/o chip failure Keyboard controller failure	System board failure
  4	Memory read / write failure	Memory failure
  5	Real Time Clock (RTC) power failure	CMOS battery failure
  6	Video BIOS	Video/smart card failure
  7	Failure of the CPU	Processor failure
  8	LCD SCREEN	Failure of the LCD

  Let me know if you need assistance.

  Thank you