HP G62-149WM MOTHERBOARD

Similar Questions

• Upgrade the hard drive on my HP G62-149WM for a 750 GB,

  If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

  Oeagleo wrote:

  If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

  Hello

  You can certainly move to a 750 GB 5400 RPM HARD drive, a 1 TB would also be possible, but it is not listed as a compatible hdd in a service guide. After a reset, the laptop will be in the same condition that you used for the first time (OS preinstalled). The recovery partition is going to be on the hard drive as well. Size is not too large, I think that it would be up to 15-20 GB...

• HP G42 / G62 / CQ42 motherboard with graphics programs list switchable

  I need a list of hp spare hardware (motherboard)
  especially with switchable graphics, I need to replace my motherboard.

  Page 26 of the manual lists possible motherboards.

  Manual

  It is clear the specifications that you have this card right now:

  Map of system HM55 UMA 595182-001

  That would be the best advice:

  HD6370/1 GB discrete System Board (only for model 1.3) 631594-001

  Who would provide the best video if that's what you try to improve. In order to advise us, we need to know exactly what you're trying to accomplish with the upgrade.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• G62-149wm: OS after you replaced the HARD drive

  I was good recently a laptop G62 with a hdd dead by a friend who did not feel it was worth the cost of repairs. I tell myself that I can put an ssd inside, and it will be a pretty decent laptop.  My problem concerns the operating system after that I do this. I have my own copy of Windows 7 (64 bit), but I read that the key for the original version on the dead hard drive is also on the bios for faster installation. And if you install a different version, it can cause problems with some versions of windows in some laptops. My question is can I use my copy of windows 7 or what I have to go through the trouble to use the key to laptops to burn another copy of the windows Web site. Possible stupid question but I want to know everything before you start this project.

  Hello

  This machine originally shipped with Windows 7, then you will be very well - injection of digital product keys started with Windows 8 - just install Windows 7 and enter your product key from the usual way.

  If necessary, original software and drivers are available on the following link.

  http://support.HP.com/us-en/drivers/selfservice/HP-G62-100-notebook-PC-series/4078809/model/4164687

  Kind regards

  DP - K

• HP G62-149WM/updated software driver for card MicroSoft Virt.WiFi Miniport

  (OS = windows 7 Home Premium)   PROBLEM = IN DEV. MNGR. updated SOFTWARE (MICROSOFT VIRTUAL WiFi MINIPORT ADAPTER) a MESSAGE WINDOWS SURGIT IN SAYING some THING LIKE "IT DON'T RECOGNIZE the PUBLISHER OF THE DRIVER SOFTWARE", THEN ME GIVES OPTIONS to EACH UPDATE DRIVER any WAY OR BASICALLY NOT TOO... SO I GUESS MY QUESTION IS "HOW TO KNOW WHERE TO FIND THE RIGHT DRIVER FOR ABOVE MENTIONED ADAPTER IN ADDITION TO WITH AUTO WINDOWS." UPDATE? I'D APPRECIATE ANY HELP REGARDING THIS ISSUE AND I THANK YOU ALL IN ADVANCE!

  The Microsoft Virtual WiFi Miniport is a driver built into Windows 7 and should not need to be updated. The correct version of the pilot was installed when Windows 7 was installed and no new updates of this driver is necessary. If and only if, Microsoft has released the update of the driver, you are trying to install, you should install it. Please check the source of the driver before installing this doubtful driver.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP G62-149WM TROUBLESHOOTING SCREEN

  Need help ASAP! Hello aid... so here's the problem! I decided to turn off Internet Explorer through the OFF... but TURN WINDOWS FEATURES ON AND after it restarts, my screen resolution is at 1280 × 800 and I don't know how to get back to his original 1366 × 768! There is now a strip of inch long black on the right side of the screen! I turned MY back 11 but sound still there! I removed the battery/power cord and power supply for 25 seconds, but still didn't work! I would appreciate your help in this matter and I thank you all in advance!

  OK, problem solved! Had nothing to do with software, drivers, etc., it's the new display cable which was kinda stuck! I noticed, that he was not the "stretch" that the former had years of use, so it is a real good interlocking and studded bezel or it may have came off the screen very slightly to where it was not connected to all the pins! Its works fine now... Imagine that! So after reinstall 2 different version of windows (7 & 8.1) not exactly knowing the problem, now comes the monotonous task of installing updates AGAIN! I'm so good with it! Have a good! And thanks again!

• HP g62-149wm webcam

  I would like to be able to turn on my webcam (with a click or two) to register myself so my son had memories of me after I pass but I don't know how to turn it on! I tried to type in QUICK PLAY after clicking on start (windows icon), but nothing shows up! So any help here would be much appreciated and I thank you in advance for your time and your help about this matter!

  Hi Ronnie!

  Please try this:
  Find and use the Webcam software that came with your computer

  If your computer is equipped with a built-in webcam, HP has preinstalled software that allows you to record and share video from webcam: Cyberlink YouCam, MediaSmart WebCam or TouchSmart Webcam. You can find these products of software on your computer as follows:
  1. Click Start to bring up the start menu.
  2. Enter one of the following words in the search field:
     • YouCam (for some desktop all-in-one PCs and many portable computers)

     • MediaSmart (for with many all-in-One desktop PC and laptop computers)

     • TouchSmart (for touchscreen PC)

  3. Click on the name of the software of the webcam from the list of search results. If the name of your software of the webcam does not appear in the list of search results, try to search again using one of the other names.
  4. What happens when you open the software?
     • If you can't find and open the webcam for your computer software, then go to the next step.

     • If you have found the software of the webcam, it opens and you see a picture, then finished. Your webcam works.

     • If you have found the software for the webcam, it opens, but you can't see the video in the main display window, restart the computer and try again. If the problem persists, use the section "Video does not appear in the webcam software '.

     ----------------------------------------------------------------------------------------------------

  I copied this from the HP support page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&cc=us&dlc=en&lc=en&product=4164688&tmp_track_link=ot_search#N70
  In case, that the steps mentioned above, didn't help, just click on the support link and follow all the steps of troubleshooting!

  I hope that helps!

  See you soon
  Julia

• Replacing motherboard G62-225nr

  I got a G62 someone because it does not work and I'm trying to fix it. Looking at it I'm pretty sure his problem with the motherboard, so my question is what are my options to replace the motherboard? Does anyone know what motherboard will fit? The stock is a bit difficult to find online, and I suspect that others do not correspond very well. Any ideas?
  
  In case anyone is wondering the problem is that the thing pretty much does nothing when turned on. No fan, nothing on the screen, not even a rotation led charge when the power cord is connected. I tested the power cord with a multimeter and the contacts of the battery charge. They return a stable load, so I don't think that it is the power supply cord or plug.
  
  Thanks for the help.
  
  EDIT: The thing IS out of warranty and I tried him hold down the power button for 30 seconds turn.

  Here is the service manual, you need:

  Manual

  It's your Council, I think:

  System Board GL40 UMA with HDMI card reader (for models 1.1 and 1.2 only) 605140-001

  It is quite reasonable on eBay:

  http://www.eBay.com/ITM/HP-Compaq-G42-G62-Intel-motherboard-605140-001-tested-working-/271483646585?PT=motherboards & Hash = item3f35afb279

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Driver Intel Turbo Boost Technology (taken from HP's Support site)

  Hello Forum members!

  OK, so roll with me here! I have a HP G62-149WM I upgraded to it is (out of the box) Windows 7 Home Premium 64 Bit for Windows 8.1 Pro 64 Bit... Then I went into page HP driver download to install the Turbo Boost driver well, as you know, it basically requires you to type in your model, you choose what operating system runs your make and model, and then it shows all the different drivers, right? So my question now is because it does not show 8.1 Windows as an operating system option, the Turbo Boost driver always works on my 8.1 win even if it was made on a technical level to work on Win 7? Thank you in advance for your time and your help in this matter!

  Ron

  Hello @ronnieron ,

  Welcome to the HP Forums!

  Unfortunately, this has not appeared to get coverage Windows 8.1 with respect to the drivers. You can try to install the Windows 7 driver, which might work, but it probably does not work well, or not at all.

  Here's the driver page, in case it becomes necessary: Drivers of laptop HP G62-149WM

  Please let me know if you have any questions or concerns. Thank you!

  Mario

• Cannot get past Boot Screen manufacturer

  I can't get my g62-149wm to go beyond the HP screen. I tried to hit escape to go into the boot options and f10 to enter the BIOS but nothing happens. It is blocked here. Anyone have any ideas?

  Do like me. I had to buy a SATA docking station, and then start on a live usb Sabayon linux (without the internal hdd is present) and back up all the data on my external hard drive. After the backup, I just formatted the internal hard drive and recovery DVDs to restore factory settings.

  You can also do a new installation or anything else you want because the laptop must be initiated with the hard drive in it. I don't have any other PC to make a back up so had to use this usb flash drive or a live cd (needs all flash usb plugged) with linux on it.

• Upgrade my i5 to i7 cpu?

  Hello help! I have a HP G62-149WM with an Intel Core i5 - 430 m processor and would like to know if I can pass the processor i7, such as listed in the service of HP for my make and model Guide? Just want to be sure before that I agree! Thanks in advance for your time and your help in this matter!

  Hello

  Yes, you can replace it-

  Manual: http://h10032.www1.hp.com/ctg/Manual/c02542455.pdf

  Page 4-47,

  HP 587259-001 part number

  http://PartSurfer.HP.com/search.aspx?SearchText=587259-001

  Online:
  http://www.Amazon.com/GP/AW/d/B008FQP89O?pc_redir=1407160273&robot_redir=1

  Kind regards

• Screw the motherboard in HP G62 b29SA - unused holes in the motherboard?

  I've been fixing G62 b29SA laptop from a friend (just replace the fan). There was some time between take apart and put back together (to get the right fan) so I do not remember if all the holes in the motherboard had screws in them. Quite a lot for screws, just spin and spin - there is no wires behind the motherboard or the screws are too small (but I don't think that I have large screws (or at least none that are not from another section (for example, battery or other).)) All the holes in the motherboard has screws?

  seanspotatobiz wrote:
  

  ....  All the holes in the motherboard has screws?

  Hello

  No, some of them have no screws, BUT all the screws must have holes. Please see the following book to see all the screw locations (see #79 page):

  http://h10032.www1.HP.com/CTG/manual/c02542472.PDF

  Kind regards.

• HP G62: buy new motherboard

  Hello

  My motherboard has been damaged, and I want to buy a new motherboard, if you can give me the Center HP selling motherboards to the Morocco.

  Hello

  How it has been damaged? Any technician that it is the motherboard is at fault?

  Who is your exact model - G62 xxxxx?
  http://support.HP.com/in-en/document/c00033108

  This is the contact of HP to the Morocco:
  http://WWW8.HP.com/emea_africa/en/contact-HP/office-locations.html

  http://support.HP.com/emea_africa-en/contact-HP

  Concerning

  Visruth

• HP g62-340us: install a new motherboard.

  I have a HP G62-340US I work for a friend and would like to get the best motherboard I can to make it as fast as possible and would like to know what would be the best motherboard to get. The product is #: XH066UA #ABA is the serial No.: [Personal Information deleted]. Do you have any suggestions?

  Ken

  Ken first if you are a disabled vet your screeen-compatible name we thank you for your service.

  Your model is G62-340US, which means that you have these specifications:

  http://support.HP.com/us-en/document/c02497777

  Regarding the manual which means you UMA graphics so the motherboard is:

  Map of system PCA UMA 592808-001

  The motherboard, it is what makes a model 1.0 or 1.1 or 1.2. However, you can install everything listed motherboards. But your processor will not work on all the boards. So if you try to install a rod is not compatible with your processor will need you a Board and a processor which I assume you want to avoid, although this vintage AMD processors are fairly inexpensive and you have a processor in the end very few options of this model.

  You have the P340 processor, which only works on 1.1 and 1.2 models. The best motherboard, that you can install using this processor would be:

  Map of discrete system HD6370 / 1 G with card reader (only for model 1.2) 632186-001

  This one is hard to find but here's for $109, which is not too bad:

  http://www.motherboardmall.com/HP-motherboard/HP-632186-001.htm

  If you want to discuss a better card mother/CPU combination post back

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replacing motherboard HP G62 a10ev

  Hi guys,.

  recently, after that almost 3 years of continious used my laptop HP G62 a10ev faithful suffered a catastrophic failure of the GPU and my screen does not light. A technician informed that I need to replace my current motherboard with a new one. I was looking for a new motherboard online, but all providers to classify different motherboard using xxxxxxx-001codes models. Unfortunately, I couldn't even identify the correct code of the spare part I need.

  I'd be happy if any of you guys could identify the code of the detached motherboard. Below, I list of the technical specifications of my netbook,

  Processor: AMD Athlon II 2.1 GhZ P320

  Graphics card: ATI Radeon HD 545v

  RAM: 3 GB DDR3

  Hard drive: 500 GB, 7200 RPM SATA

  PS: Excuse me for my faults of grammar and syntax, I live in Europe and English is not my native language

  Hello

  Please find the link below check page 74

  http://h10032.www1.HP.com/CTG/manual/c02542472.PDF