HP G62 229WM with Windows 7 64 bit

Similar Questions

• HP G62-363NR with Windows 7 64 bit, FN key driver/software required.

  Hello!
  
  I installed a clean Windows 7 64 bit on my laptop HP G62-363NR. I don't want to install all the HP programs EXCEPT the one that I need to be able to use the FN key. So far, I've tried HP Quick Launch, HP, HP Advisor and HP Support Assistant software framework. None of them worked. So please tell me what software I have to install for this. Links are appreciated, as well.
  
  Thank you!

  Action keys mode disable the key of fashion

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• Mr President, I have updated my notebook pc with Windows 7, 32-bit after pc high grade asked

  I've recently updated Pc with Windows 7, 32 bit. It causes a lot of problems after the upgrade. I find it difficult

  by typing this post too as long as the cursor moves to eratically. I'm not able to retrieve documents stored on the removable hard drive. I need your immediate support. I feel very grateful for your action pubs.

  Krishnan.

  Hello

  Please contact the service. Is your machine still under warranty? Changing the operating system can void the warranty:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html
    http://welcome.HP.com/country/W1/en/support.html

  Good luck.

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• PowerPrep application is not compatible with Windows Vista 64-bit

  I am currently studying for the GRE and the website includes a study great tool/application called PowerPrep or something like that. I downloaded it and it says it is compatible with Windows Vista 32-bit, I have a Toshiba Satellite running Vista 64-bit and when I go to start a program I get the error message "the version of this file is not compatible with the version of windows you are running check system information from your computer to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program" is anyway to run the program with my computer. I thought that 64-bit is technically compatible with 32 - bit, but I don't know much about computers. Any help would be greatly appreciated.

  Hello

  "Most programs designed for 32-bit version of Windows works on the 64 bit version of Windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. »

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• HP pavilion dv6-1030us with windows vista 64 bit have now upgraded to windows7 32 bit.

  HP pavilion dv6-1030us originally with windows vista 64 bit have now upgraded to windows7 32 bit. MIC is unable to send sound in Skype after upgradation.

  Hello

  Try the following.

  First, uninstall Skype and when it is finished, restart the laptop.

  When windows has reloaded, download and reinstall the Chipset driver here.

  Once the installation is complete, restart the laptop.

  Let windows load completely, then download the installer of IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45044.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Reinstall Skype and see if the MIC now works Ok.

  Kind regards

  DP - K

• Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

  Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

  "ZainS" wrote in message News: * e-mail address is removed from the privacy * .com...

  @ Ken... I tried installinng windows vista by using the recovery disk that will get a customer with the computer dell laptop... and then he was trying to install vista on my computer... It works fine when installing files, but it is and stucks where he says 'finish installation' and he won't do anything after that... I tried to restart my computer and I could see Microsoft coportation logo and then my computer stucks to this screen and wont connect in... not sure what exactly to do... by the ways for your reply thanks

  You cannot use recovery discs to install with, if not for the exact model computer that you install.  You need a full installation detail of the model of Vista operating system you want to install since you don't downgrade your operating system to a system that offers no right of demotion.

• LaserJet p2015 is not compatible with Windows Vista 64-bit

  I just got a new computer with Windows Vista 64-bit operating system.  I tried to connect my HP Laserjet P2015 printer, but it was not recognized.  In addition, the computer does not recognize the CD supplied with the printer.  Download the necessary software on this site?  I can't seem to find it on mine, and I am a novice when it comes to computers.  Any help out there?  see you soon

  Go to Support & drivers above.  Click on drivers.  Enter the model number of your printer.  A list of drivers should appear.  IF Windows Vista 64 bit is listed, click on that and you should be on your way.  BUT be aware that not all older printers are compatible with Windows Vista 64-bit.  I have a HP Scanjet 4470c which is not compatible with Windows Vista 64 bit on my new HP computer.  So I have a HP Scanner perfectly although I can't use and this Scanner is not that old.  Good luck!

• Can someone suggest a print to deskjet hp1280 driver to work with windows 7 (64 bit)?

  Can someone suggest a print to deskjet hp1280 driver to work with windows 7 (64 bit)?

  Hello:

  Please see if Vista x 64 driver works.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=439162&prodNameId=439174&swEnvOID=2102&swLang=8&mode=2&taskId=135&swItem=dj-52448-1

  If this isn't the case, it's probably time for a new printer.

  Paul

• printer compatibility with windows vista 64-bit home premium

  When I installed the software for an hp 5650 printer on my dell xps with window vista 64 bit family premium, I received a message stating that the operating system was not at a minimum level for performance maximum printer.  I printed a word document and photo, and they seemed very well.  What does the message mean?  Y at - it a upgrade for my os should I download?

  There is no upgrade of the software of the printer.
  HP wrote the software and drivers, not Microsoft.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01655752&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=304445

  Link above has HP workaround for problems with it.

  See you soon. Mick Murphy - Microsoft partner

• Printer still prints nothing or only partial pages with Windows 7 64 bit

  I have a laptop HP with Windows 7, 64-bit four months and I am currently on my THIRD new printer.  When I send a print job to the printer, the printer lights up and prepares to print, and then print anything at all or part of a page and then gives me an error message and cancels the job.  This happened to start with a new HP printer, so I took it and got a new Lexmark printer.  When the same problem happened with the Lexmark, I brought back and now have a brand new Epson.  All three printers have had the same problem.  With the last two, I have tried everything - unplug the printer, the print queue, compensation uninstall, and then reinstall the software, ensuring that programs have been allowed on the Windows Firewall, temporarily disable AVG etc.  A recent post, I found said that to change the print of 'Print immediately' settings to "Printing after last Page is wound" (or something like that) helped, but I tried and it did not help me.  I did a lot of research on Google and it seems to be a persistant problem with Windows 7.  Admittedly, I found that it is not a problem with my printer.  Help, please.  I am a student who is very desperate to print and do not know what else to do...

  Hi Lady Justice.

  I suggest to test your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xerox workcentre ss16 does not work with windows 7 64-bit version

  According to Microsoft the xerox workcentre pe16 works perfectly with windows 7 64-bit version (see link http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Xerox%20WorkCentre%20PE16%20All-in-One%20Printer&v=Xerox&uid=PE16&pf=1&pi=5&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit)

  However, in reality, it doesn't work and I can't find a driver. what Miss me?

  THX.

  If use you Windows Update, it will install a printer driver, but the scanner does not work, Xerox has not yet developed a driver for Windows 7 for this printer/scanner. The latest driver is for Windows Vista since 2008. I hope they won't disappoint us and come up with some appropriate support of Windows 7. If anyone has a work around to install the scanner, I'm all ears.

• The British version of the DM1 comes with Windows 7 32 bit rather than 64-bit according to the United States

  I just bought a HP DM1-3100SA and noticed that it came bundled with Windows 7 32 - Bit Home Pro instead of 64-bit according to the American version (DM1Z?). As far as I can see, the hardware is identical - AMD Fusion E-350, 3 GB, 320 GB drive at 7200 RPM so I see no reason for HP to opt for the operating system 32-bit to the United Kingdom as the E-350 is a 64-bit APU.

  Is it possible to re - install W7 64-bit of the recovery partition or am I stuck with W7 32-bit?

  I guess that there is the option to purchase the retail copy of W7 64 Home Pro, but seems an unnecessary extra cost.

  Thanks in advance.

  Hello

  If it is still topical for you:

  the ISO in Windows7 files can be downloaded from Digital River (the Microsoft online provider - see links below).

  These images are free of viruses and completelyLEGA

  Of course you must have/buy a valid license, but the laptop key dm1, we can re - use the key provided for Windows7 32 bit.

  Watch you if you clean install Windows7 you won't not the HP tools... the question is if you really need them. But it is STRONGLY recommended to re - install HP Coolsense since it regulates the temperature/fan.

  Link:

  http://TechPP.com/2009/11/11/download-Windows-7-ISO-official-direct-download-links/

  Have fun!