HP g62 460so startup failure ID

Similar Questions

• Software YouCam for Hp g62-460so windows 7 premium 64-bit

  Hello

  I've felt for a download link for the software youcam 3 to my Hp g62-460so with windows 7 Home Premium 64-bit, it was in my machine, but I did a clean install and I can´t find the sofware anywere.

  link to my machine http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=da&cc=dk&dlc=da&sw_lang=&product=5040...

  Help, please

  Best regards jan

  Hi Jan,

  You absolutely want the driver Chipset on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49523.exe

  When the installation is complete, restart the laptop.

  Let windows fully recharge, open windows control panel, then open the Device Manager.

  Look for all the entries that are listed as "Unknown device" or have a warning (yellow) against them triangle.  For each of them, follow these steps.

  Right-click on the device problem and select Properties.  Click on the Details tab, choose hardware ID in the drop-down list and post back with the details presented in the title of the value.

  Kind regards

  DP - K

• Keyboard Predator G3-710 at startup failure

  Hello world

  I had my G3-710 4 months and so far love it until today.

  Today I got keyboard at startup failures upward on my predator keyboard and the keyboard does not light.  I tried all usb slots and it makes no difference.  If I kept Windows, he did the light upwards, but now does not only.  I plugged in a spare room and works on all ports.

  Is there a way I can definitely confirm that this is a failure of the keyboard before going through the trouble to send it back to Acer?

  See you soon

  James

  Connect your predator keyboard to another PC and check if it gives you error too (the BIOS must be set to stop on error of keyboard)

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

• G62 Intermittent boot failure

  Over a period of several weeks, this 5 year laptop has developed a failure intermittent startup.

  I went through all the suggstions found on various forms (running the diagnostics of F2 and F10 etc.; replacement of battery) and found yesterday when everything started normally!

  This morning, after having run the new battery down to compress and recharged during the night, the lapyop was to his old habit--won't start do not.  The fan should run at high speed for a few seconds then continues quietly with no display.

  While trying to access this forum on an Android Tablet (no luck) the laptop decided to come to life spontaneously long after pressing the Start button.

  The result of the diagnosis of F2 showed a failure ID: GGFXPT-5A47P2-9XL03F-60QE03, but running a diagnosis deepened from the BIOS gave no error some!

  I was on the point several times of just this "thing" reveling in the tray, but would welcome that there must be a permanent solution somewhere out there.

  Hi there @s_gw,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked into the problem you are experiencing with your laptop. You had mentioned receiving a failure ID: GGFXPT-5A47P2-9XL03F-60QE03. Identification of this failure code is the code for "Hard disk 1 Quick Test Failure".

  This failure Code is related to the hard, I suggest that you save all important files as soon as you can.

  Here are two documents that will help you solve the problems to find the root cause.

  1 HP laptops - Hard Drive failure errors: failure Imminent, Smart, BIOHD, HD535, etc..

  2. HP Notebook PC - hardware failures (Windows 8) screening.

  If this is insufficient, please use the following link to create yourself a file number and then contact us:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  Please follow the troubleshooting provided and save all your files. IF you need assistant extra, I'd be happy to help, I just need your model number (How can I find my model number or product number?) and which Windows operating system you are running?

  Thank you!

  Have a great day!

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• The system at startup failure: error 0xc0000098

  When I start my computer. I get an error message tiltled WINDOWS STARTUP MANAGER. Windows could not start. A recent hardware or software change might be the cause. To solve the problem, it says to insert the file installation disc: \windows\system32\drivers\NIS\1008000.029\SYMEFA. SYS status: 0xc0000098 original title: System failure

  Hello

  SYMEFA. SYS says Norton (Symantec). So, I would like to confirm if Norton (Symantec) is running on the system. The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.
   
  In this case, because the system is unable to start up normally, I suggest that we first of all a Safe Mode to uninstall Norton (Symantec) to check the issue.
   
  Uninstall Norton (Symantec) in Mode safe
  ==========================================
  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.
  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.
  3 log on to Windows by using the administrator account or any user account with administrator privileges.
   
  Note: In Safe Mode, the display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return to Normal Mode from the system, we can simply restart the computer.
   
  To uninstall Norton Internet Security, please run Norton Removal Tool.
   
  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.
   
  4. Please visit the following Web site to download the tool:
   
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.
  6. run the tool according to the instructions on the Web site.
  7 restart the computer to check again the issue.
   
  However, if you still have any concerns to uninstall Norton Internet Security, please visit the following link to turn it off.
   
  http://Service1.Symantec.com/support/NIP.nsf/docid/2003071515220236

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP G62 hard drive failure

  My HP G62 laptop not boot more. When I do the diagnostic test, he says that there is a hard drive with the ID of the fault failure: MCV9B3-53A5SC-XD002J-60U703. This means that the hard drive is broken and I need to buy a new one, or there at - it workaround?

  Thanks for the help!

  Bert

  Hi, Bert:

  Sounds like the hard drive needs to be replaced.

  You will also need a set of discs of recovery of re - install the operating system, but you must have exactly the model # order them unless you do a game when you got the PC.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProdSearch.jsp?lang=en&cc=us&TaskID=&prod=G62

  Paul

• HP 15 laptop: startup failure, failure of the DST on 15 HP, with 8.1 windows

  Salvation in the transition from my laptop it displays

  automatic repair, then displays diagnostic PC for hours.

  I tried using F2 and found the failure of DST, and in the management of the firmware, BiOS update and roll back did not indicating that the Signature file was not available.

  How can I get my data back and restore my system? Looking for options and help

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm afraid that it is hardware problem - faulty hard disk drive (HDD). For more details, you can provide me with the full error code that was present there.

  However, since this is the defective HARD drive, you probably will not power recovery files (details to follow).

  Your options:

  (1) If your computer is still under warranty, please contact HP support and inform. They will work with you on how to replace the faulty component.  Contact HP:

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > > http://support.hp.com/us-en/contact-hp

  (2) If your computer is with the warranty period has expired, you will need to replace the failed HARD drive - buy it yourself. There are various options - sellers you can choose one - you need 2.5-inch SATA HARD drive. You can get it online or retail store of PC.

  You can also consider installing the SSD instead of the HARD disk - it is strongly recommended that SSDS are faster, lighter and more folding. More info on SSD:

  > > http://www.computerhope.com/issues/ch001396.htm

  > > http://www.pcmag.com/article2/0, 2817,2404258,00.asp

  How to replace the failed HARD drive with new HARD or new SSD drive: Please, find information and instructions in the manual for your computer or look at examples of videos YouTube for HP 15. If you do not want this in your own, please make the computer (or ship it) to the authorized Service Center HP where technicians will do that for you. If you don't know where such a centre, check the latter or contact HP to help find one closest to you:

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/store-finder/find.do?bs=SR4 & type = authorized

  (3) last part - once you replace the defective component - you have to reinstall your operating system - Windows or another return. Thus,.

  (3.1) IF your computer is originally shipped with Windows preinstalled from HP (aka OEM of Windows), then you must use the HP - DVD or USB pen drive recovery media you have previously created recovery media or purchased from HP. Some general info > > http://support.hp.com/us-en/document/c00006110

  (3.2) IF your computer is not originally came with Windows pre-installed, but you later installed the operating system on your own, you must use the operating system / Windows installation media and install Windows on your own.

  Please, let me know how it goes and post back if you need assistance. Impatience your feeback/response.

• Y580 startup failures

  I own my Y580 for 2 weeks now and everything is fine. Since yesterday, the startup fails with a blank screen and the light of the lit keyboard. Disable the Y580 with button / stop and try 5 - 10 times to boot, Windows 7 starts up and runs very well. After this restart or switch off voltage works great as many times.

  Several hours waiting for example. all night with the Y580 of if turned off, the problem occurs again.

  I installed Windows 7 regular updates and a new driver for the GPU. I restored WIndows to the point before the update driver GPU - same problem.

  Any comments?

  As WIndows does not attempt to start at all, I wonder if Windows is the cause of the problem or something else?

  Thank you

  Jens

  
  

• A registry XP file at startup failure error

  Had a power outage a few nights ago. After the return of power, computer with XP Pro would start to start, but after the logo Windows XP, the blue screen appeared with the message:

  STOP: C00000218 {registry file failure}

  The thehive of load registrycannot

  Root\System32\config\SOFTWARE or itslog or its replacement system

  Cannot start with options (safe mode, etc.).

  Cannot restore to any previous restore point.

  BUT... If the blue screen memory dump is allowed to continue, the machine will restart and will start.

  Mystifying to me. Someone has any idea how to get back to normal? The sequence of double-boot is a pain... and of course * something * wrong.

  TIA

  Hello

  If you have a Windows XP CD, you can boot the PC with the CD.

  Once started press 'r' to enter the recovery console. Follow the instructions until you have the command prompt.

  (Here's a nice document with screenshots to help you: http://pcsupport.about.com/od/fixtheproblem/ss/rconsole.htm)

  Type in

  CHKDSK c: /r

  and press ENTER. This will check your hard drive for errors. Once done restart the PC.

  If the PC gives the same error then follow this document to recover the registry from a backup.

  http://support.Microsoft.com/kb/307545

• DELL INSPIRON N5050 STARTUP FAILURE WITH CODE STATUS 0XC000000F

  Turn on the laptop, pass the dell logo. Then, it goes into a strange screen:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. to solve the problem:

  1. Insert your windows installation disc, and then restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "repair your computer".

  If you do not have the disk, contact your computer manufacture or to help system administrator

  status: 0xc000000f

  Info: the boot selection failed because a required device is accessible.

  I tried every option after I pressed F2, F8 and F12. It does not work, all find themselves with the sameinformation.

  I have a very important project in my laptop. I need my system to the top ASAP.is it a simple solution for this problem. My guess is that I need an insta

  set disk from dell and I think that it does not guarantee recovery. I don't know how much it will cost to get the laptop disc.my is just out of warranty(5/1/2013). I asked once for a dell installation disk when it is still under warranty, but dell never give to me.it is too disappointed. Someone here can help me with this question or make me a free as soon as POSSIBLE installation disc. If dell is unable to solve this problem, I swear to God, I will not buy any dell product.

  Hi jessonchien

  I suggest to check the system into safe mode with networking, follow the listed below as follows:

  • Restart the computer.
  • Press on during startup until the Windows Advanced Options menu appears.
  • Press with networking Safe Mode is highlighted, and press .

  In the issue persist in safe mode so would run you dell diagnostics running on the system, press to the initial Dell logo screen, then select Diagnostics from the boot menu.

  You can ask to drive the operating system from the link below:

  http://Dell.to/XBcVDN

  Answer please if you have any other questions.

  Thank you & best regards
  Prateek K
  #iworkfordell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• ODI Agent startup failure

  Hi all
  
  I installed and configured ODI 11g I've done as a result of tasks
  
  (1) created Master repository
  (2) user connected to the ODI
  (3) created work Rep
  (4) created both physical and logical agent
  
  Until I started agent I've done as a result of tasks
  
  1) updated my ODI PARAMS
  
  Updated master Rep info:
  Updated my relational db information associated with master rep
  
  Encode the password:
  My main repository is ODI_MASTER and password password1
  
  Command: encode password1
  
  I've updated my ODI params with the new encoded password
  
  Similarly, I have updated the coded SUPERVISOR password.
  
  I have udpated my info from repository work as well.
  
  But when I start the agent from the command line, I get following error
  
  
  ' E:\ODI_HOME\oracledi\agent\bin > E:\ODI_HOME\oracledi\agent\bin\agent.bat '-NAME = P
  RODAGENT""-PORT = 20910 "»
  OracleDI: Starting Agent...
  2010-11-01 12:50:05.490 ODI-1128 NOTIFICATION Agent PRODAGENT begins. App
  Planning Server: AUTONOMOUS. Agent version: 11.1.1.3.0 - 23/06/2010. Port: 20910.
  JMX port: 21910
  2010-11-01 12:50:07.771 ERROR ODI - 1131 PRODAGENT Agent encountered an error: ODI
  -1404: agent PRODAGENT start failure: an authentication error occurred when con
  momentary to the master repository.
  2010-11-01 12:50:07.771 unavailable WARNING
  oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:233)
  javax.servlet.GenericServlet.init(GenericServlet.java:241)
  org.mortbay.jetty.servlet.ServletHolder.initServlet(ServletHolder.java:431)
  org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:263)
  org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
  org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:676)
  org.mortbay.jetty.servlet.Context.startContext(Context.java:140)
  org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1239)
  org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517)
  org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:466)
  org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
  org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
  org.mortbay.jetty.Server.doStart(Server.java:224)
  org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
  oracle.odi.Agent.startAgent(Agent.java:200)
  oracle.odi.Agent.main(Agent.java:493)
  
  
  Please let me know if Iam wrong at any point.
  
  Thank you
  KRK

  Error Message - Agent PRODAGENT start failure: an authentication error occurred when connecting to the master repository.

  KRK please re check in the odiparams if the ODI_SECU_USER and the ODI_SECU_ENCODED_PASS are correct and also if you are using the correct ODI_SECU_URL
  Also did you set the agent in the topology with the same PHYSICAL NAME of the AGENT - PRODAGENT and port no-20910?

• Satellite A215-S4757 blue screen & startup failure after HARD drive partitioning

  I just bought a Satellite A215-S4757 a week ago & I tried to divide my hard drive coz, I was only one partion (250 GB) using acronis disk director.

  After that I got the blue screen and now I failed to start and I tried all the options to repair my windows or load in SafeMode to no avail coz it crashes just from the window of microsoft corporation.

  I tried to reinstall windows vista with the cd but still does not!
  pls someone helo me :(

  Hello

  Creator of disc of Acronis does not for me but I know for sure that you can split the capacity of the HARD drive into two partitions with rendering recovery DVDs. Start your laptop with recovery DVDs and check the option to install it.

  You must have a mobile US model. I am from Europe and I don't know about you how it works with the recovery media in the United States, but it should be similar to the European and because of that it must be an option to divide the capacity of the HARD disk with two partitions.

  Please try again. It should work somehow.