HP G62 model #229WM: Bios

Similar Questions

• HP G62-355DX has BIOS Ver F.29. but the show F.27 HP Web site

  My HP G62-355DX has BIOS Ver F.29, but the site Web of HP see F.27.

  List of all the Version of BIOS HP G62-355DX

  Anothere user had same issue (see last post)

  Why is this? Is this update to the Bios Beta I have on my laptop?

  I check each version of bios Fix/improvement to see if it was a type-o in the update of the BIOS code, but said nothing he was.

  It is not a beta BIOS, F.29 and F.28 are available for G62-229WM that uses the same motherboard of your laptop APC-SPS-592809-001 SYSTEM BOARD UMA MDM CR

  Perhaps the BIOS has been updated with HP support assistant, but I'm not sure about this.

  BIOS G62-229WM

  HP G62 - 229WM NOTEBOOK PC (game details)

  HP G62 - 355DX NOTEBOOK PC (game details)

  Good luck.

• HP model #A6000n Bios Checksum error after update Bios!

  I did update the Bios posted on the Hp website... After the reboot, all I get is this error, "BIOS Checksum Error", the black screen then looks for a boot diskette drive (this computer has not), then it looks for a boot on the CD drive disc.  Now, I talked to HP support and they say I have to order the recovery disks.  Someone can send me a bootable file that I could burn it to a CD for this model machine and get it operational?  I have an older machine here that would allow me to make a bootable CD, but I have no idea where to find some sort of update of the BIOS and or file bootable to Flash the BIOS.  I am so angry that HP wanted me to buy this CD recovery program has just returned in Windows Vista.  But, I don't know what to do because the update of the BIOS must have been corrupted when I flashed the motherboard ASUS.  This computer is my aunts and she failed to save restore disks and now I'm lost as to lift this thing up and running... Help, please!

  Thank you!

  As I said, if you have a floppy is easy, especially since the computer diskette is XP. OK, let's go.

  (1) place the disk in the drive

  (2) open my computer and right-click on the floppy drive

  (3) choose the format on the menu that appears

  (4) put a check mark in the box "create an MS-DOS startup disk".

  5) click on 'start '.

  When 6) filled the awdflash.exe on the diskette copy

  (7) right click on the file of BIOS from HP

  (8) to move the mouse cursor in 7 - zip and click "open archives".

  (9) double click on the folder icon in the new window

  (10) right click on the ROM file - in this case 513. ROM

  (11) choose "copy to" from the menu and browse it on the floppy

  (12) when it is completed, the disk should be ready to work

  (13) move the floppy drive cable and the Ribbon in the Vista computer.  He didn't need to be mounted, but make sure that it does not touch something metal (participation of books will be good) and connect the water and the power supply to the motherboard and the power of the Vista computer (of course, it is done with both computers turned off and unplugged)

  Now ready to go on the Vista computer. When you press the power button on the computer, there will be a splash of HP come screen upward.  From this screen, press her "enter the BIOS' or 'Boot to install' as shown.  I forgot to ask if this screen appears in the previous posts.  If this screen does not appear then it will be much more difficult.

  When in the BIOS, look for boot order and then set it can boot from the floppy first.  Save the selection to get out.

  (14) reboot - should end up with a cursor blinking in the upper right

  (15) type AWDFLASH 513 rom/py/sn/cc , and then press ENTER.

  (16) when and if he finished power down and remove the drive from the computer disk

  That should do it.  If this does not work or there are problems come back with an explanation of what was happening.

  Of course, to do this at your own risk.  I'm just trying to help.

  
  

• Laptop HP G62-363NR PC BIOS PASSWORD

  Laptop HP G62-363NR

  systemdisable code 68157704

  How can I reset bios password?

  Hello

  Try to enter: 77835320

  Kind regards

  DP - K

• HP Pavilion h8-1132sc: Geforce GTX 960 works do not with h8-1132sc model? (BIOS?)

  Hey.

  I just bought a new graphics card (Geforce GTX 960) for my computer. After replacing my old and my pc startup, I'm stuck at the blue HP screen, with 1 beep and then 3 beeps and nothing happens.

  I can google myself to, many people speak the BIOS (I upgraded to 7.12), but it still does not...

  Anyone?

  Taxbo, welcome to the forum.

  Your problem is, the 960 GTX requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to upgrade the BIOS in the UEFI.  The last video cards that does not need UEFI are the GT of 640.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Mini 1000, model: 1199EV: bios password HP Mini 1000

  Technician im a PC and I need the default password to access a HP Mini 1000 for a client of mine.

  the model is: 1199EV

  s/n: (deleted content)

  Thanks in advance

  @WizZarDsFrEE

  Enter: e9lo317xwt (3rd character is a lowercase L)

  Kind regards

  DP - K

• G62 a13 - is: HP G62 laptop reset BIOS password

  Hello

  When I try to inter in the configuration of the BIOS at startup, I wonder a password that I don't know, and if entered incorrectly for three times, I get an error code: 85068350.

  How to get this recovered? All I want to do is enter in the configuration to activate 32-bit virtualization...

  Hello

  Enter: 30940996

  Kind regards

  DP - K

• G62: reset password bios g62

  Laptop has lent to someone and came back with the secure bios.  Error code is 68518153.  Please send reset code.

  Thank you

  Hello

  Please enter:

  77470195

  Kind regards.

• HP envy dv6 model 7226nr bios admin password reset

  Yes, I'm OperationDumbo when it comes to cpu, these days... I read and learn a little & then become very dangerous... I have a good friend of cpu help me... he didn't know my cpu and reset the bios admin password... He suggested to disconnect the battery for 20 min and did not work... I tried each passw I thought maybe it's & wrote about my cpu paperwork that was lost in a move... of course would appreciate any thoughts you have to restore... After that I tried what I thought it was 3 - 4 times I get an error message14284278... I tried that # and it didn't work either... I didn't understand how to post in this forum yet if I pm you... I guess I have an acct to see if you qualify... Like TY gentlemen!

  Hello

  Enter: 01182878

  Kind regards

  DP - K

• HP mini model # 1151nr bios password

  Hello, I bought a hp mini model #1151nr of Craigslist and stupidly forgot to turn it on and check that everything was ok before my departure. When I got home n turned on so I was promped to a "current password" after hit enter 3 x then I get the error message:
  "Password check failed
  Fatal error... System stopped
  CNU9242m4x ".

  Could you any1 please help me, thanks in advance for your time

  Hello

  Try one of these it should work

  e9lo7v74v4
  e9lo7v74vr

• How can I reset my BIOS password on my computer hp G62 laptop?

  Please note that I tried the 'normal' procedure or standard used to reset my BIOS password and I noticed in many other positions, this computer (laptop G62) maintains its BIOS data even after removing the battery from the room.  I also tried to short-circuit drivers who appear to be linked to the battery to remove all ability and that did not help either output.
  
  If someone has successfully cleared the password for this computer model or an employee of HP with knowledge or the wisdom of how to do it, please let me know.  My computer is beyond his support a year date and therefore a tax will be assessed should I call Tech Support and therefore would be too grateful for any help.

  Thank you - Glenn

  PS:
  Seems to me that it must be possible for the owner of the PC knowledge.

  Welcome to Pi-Boss. Try.

  34738299

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP - g62: bios set up locked

  Hello! I have a laptop hp - g62 and my BIOS set up has been locked after I entered 3 wrong passwords. the key is 73251517. Please help me it unlocked.

  Steps to follow:
  1. use the posted above unlock code to access the BIOS
  2 disable all passwords that are enabled
  3. If the request for current password - enter the unlock code
  4. for the new password, simply press the ENTER key
  5. repeat the same thing to check the password column.
  6. then exit the BIOS saving & output option to save the changes.
  
  Troubleshooting:
  Incase if the password does not work please try a Hard Reset as follows.
  
  1. power off the laptop
  
  2 disconnect the power adapter and remove the battery
  
  3 hold the Power button for 30 seconds
  
  4. connect the power supply/AC adapter (leave the battery at the moment) and start Notepad
  
  5. If now see you a password, please enter the same password I've shared before and press on enter
  
  Hope this helps, for other queries in response to the post and feel free to join us again
  
  * Click on the star of CONGRATULATIONS on the left to say thank you *.
  
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Satellite L305D corrupt BIOS

  Hello guys,.

  I have problems with the satellite L305D (PSLC8U) friend. I've upgraded to windows 7. In support of product, I read that in order to use windows 7 I have to upgrade the bios of the laptop to the latest version (1.80).

  I tried to upgrade from Windows because it is how the upgrade utility works (once I have downloaded and run the utility started the upgrade automatically). At halfway through the computer upgrade became unresponsive and display deleted. I let it rest for a while and that nothing happened after half an hour I have pulled the plug and the battery.

  Now, when I turn the laptop on the screen is empty (even the screens backlight does not illuminate) the CD rom has a certain activity and nothing happens.

  I searched in many places and the method of recovery below and I try to follow this but nothing happens:

  "Using another computer if necessary do the following:

  (1) download the file for your model laptop BIOS "*.exe" since the Support section. Mine was: slm0v150.exe
  (2) extract the files from the file "*.exe".
  (3) locate the file that ends with ".fd", it's your actual BIOS file.
  * (for different brand BIOS, the file may have a different extension such as ROM or .bin)
  (4) rename your BIOS file to: "BIOS.fd" without the quotes.
  (5) format a USB Flash drive (FAT or FAT32) file system.
  (6) copy your 'BIOS.fd' newly named file in the root directory of the Flash drive. (Not inside all folders)

  On the damaged computer, follow these steps:

  (7) remove the battery, adapter sector and hard drive.
  (8) plug the Flash drive with your "BIOS.fd" file on the subject into a USB port.
  (9) while holding down the button Fn and F on your keyboard:
  (a) connect the adapter to your computer.
  (b) hold the Power button until the computer turns on.
  (c) release the power button and the two keys once you hear the fan turn.
  (10) see your flashing, Flash Drive LED wait that your computer turns off and remove the Flash drive.
  (11) replace the battery and hard drive.
  (12) you're computer should be all set! »

  In my case, the laptop does not access the USB key (the led on the USB key does not blink).

  I also tried to use the same flies on a CD, and the only thing that happens, is that it reads the CD and then nothing.

  I even tried to use the flashing the BIOS utility on American support to Toshiba site where the utility allows me to create a CD bootable and Flash the bios from the CD. The same result.

  The laptop uses the insyde BIOS.

  Please help me because I'm desperate

  Hi hapipaz,

  If something went wrong during the BIOS update you need professional help a special service authorized because the recovery tools are necessary for ROM module. If only a mobile technician can do this work for you.
  On the Toshiba Web site, there is a list of all FSA in your country. Contact the nearest one and ask for help :)