HP G62 Note book: battery Cmos missing message even after replacing the new battery.

Similar Questions

• my hp 5550 printer is not printing from a connection direct mac after replacing the drive hard * bleep * cause of

  my hp 5550 printer is not printing from a connection direct mac after replacing the hard drive due to the recent recall

  So, you have reinstalled the HP software after replacing the hard drive?

  What version of Mac OS X are you using?

• Time used to synchronize even after replacing the battery.

  Original title: time synchronization

  my time will not sync I thought I was my batery so I replaced it but it was not she but when the battery is out of the plateau mouther it would sync I tried all servers. I also took the new battery and checked voltage

  Hi Dlog,

  You can visit the manufacturer's Web site to install the latest version of drivers for BIOS and check if it helps.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• Does not print even after replacing the cartridges refilled with geniune ones.

  HP Officejet 8600 more all-in-one. Win 7 and 8.1

  We recently had some inkjet cartridges recharged at the shop [personal information deleted]
  Overland Park Kansas. They worked for a few days then our printer started to show error messages. Since then, we replaced each cartridge with a brand new black cartridge genuine HP, but our printer no longer works. I was wondering what kind of recourse do we have. We were happy with Costco over the years, but we hope that we don't end up having to buy a new printer. We also provide this letter to HP to see what options we have. Thank your for your quick response.

  Thanks for the information. "With this error, I suggest following the actions suggested in this troubleshooting guide: "Printer failure"Message may include a ' 0x610000f6" or "0x61xxxxxx" error Code appears on the printer.

  Since your error has an error code, you want to follow the second option in the document. I would like to know what are the results with as many details as possible.

• All-in-one HP Photosmart C309a "Alignment failed" error message even after cleaning the print heads, etc.

  About 3 weeks ago before making the error msg above, a large black ink blob appeared on my printed piece of paper.  This product for several sheets later, but kept decreasing in amount.  I continued to print & finally all traces of ink have disappeared.  2 days ago I got a msg of error on "load plain white paper. ", but the paper tray was plain white paper in it.  I have removed the paper, straightened and her successor. As a result, the msg "Alignment failed" appeared.  I went through all the steps HP online information on the treatment of the "alignment failed", including the cleaning of the printheads (the right amount of ink was on it), check the vents of cartridge, etc.  My question is: if I have 4 out of colored inks and a new black ink installed, the alignment is being affected by the old cartridges?  A msg on this appeared on the Control Panel, giving the opportunity to proceed with the old cartridges or install new ones, but be careful that it "cannot allow completion of...» "If 'old' were replaced not.  I need to replace these color cartridges or is it probably another problem, which is print head damaged?

  Checked the evacuation & there is no problem, so I tried the informal solution to put the printhead in hot water.  A ran 1 cleaning via / configuration on the printer and finally aligned with success tools.  I waited a while to respond because I wanted to see if the printer should continue to work, and there!

  Thank you very much.  I'm happy that I can keep this printer!

• Microsoft Office XP does not work & won't turn back on after replacing the motherboard.

  My card mother P4 PC died and was replaced by a Council of more recent double-thread.  I kept the HD (Win2K) and it starts and runs very well.  However, the Office XP Prof who has one large on the P4 Board now says she must be reactivated.  I put the original CD of OEM MSOffice in, but he replies that he cannot find 'PRORET. MSI"and fails.  A search of the CD can't find any file.  However, it installed and works perfectly, when the jury P4 was in the PC.  How can I recover my Office features?  I tried to upgrade Win2K to XP, but the OEM XP CD refuses to go, saying he has no upgrade available from Win2K XP.

  Hi tekctrl,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to access and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  Community office
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• I'm unable to install Adobe Creative Suite Design & Web Premium, even after entering the serial number under license. There is a message that says that the Adobe product much be not genuine. I have 8 licenses that I had installed on 2 computers avecjo

  I'm unable to install Adobe Creative Suite Design & Web Premium, even after entering the serial number under license. There is a message that says that the Adobe product much be not genuine. I have 8 licenses that I had installed on 2 computers with no problems. But the 3rd computer begins to complain that there cannot be a genuine version. I need some advice please.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Software not valid https://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Error message "unable to apply the new theme.

  A few days ago my themes worked well in Adobe Captivate 7.  I created a custom theme and now I see again the themes preloaded in the themes Panel, but when I click on a theme, I get the same error message "Failed to apply the new theme" any theme choose what project I am, or if it is a new or existing project.

  When I go to the slide master it shows some pre-series either.

  I checked my Adobe Captivate theme folder and it seems that the only thing there are skins now (although I'm not sure of what was there before).  I don't know how simply disappeared.  I even tried to uninstall / reinstall the product and for some reason, it does not.

  If you are on Windows, it is pretty easy.

  Close Captivate

  Right-click on the shortcut and look at the properties.

  Opinion on the properties is a button to open the location. Click it, and Windows Explorer opens.

  Starting location in the Solution Explorer, open the folder Utils.

  Double-click the CleanPreferencesWin.bat file. (Note that you can not see the part .bat, according to your settings in Windows)

  Now close the dialog box and restart Captivate.

  See you soon... Rick

• HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

  Recently, I messed up my CPU and bought a replacement (exact same kind). I am running windows 7 ultimate and for about 6 months prerequisites with no problems. After replacing the CPU I get intermittent lock ups, sometimes with a small portion of the screen flashes. I say intermittent but at least every 15-20 minutes. Different programs, different habits, but still the screen freezes.

  I went in and deleted the driver under graphics cards, pick a 'completely remove the option' - it after restarting the system on its own charged for a Standard VGA Graphics Adapter and since there is then no more accidents. Of course the functionality is not as complete, large icons and such, but it works.

  If it certainly seems to point to a driver conflict I think. But for this machine, is there ever any single Vista Windows 7 driver. My skills are not so, but I'm moving.

  Any guidance?

  Hello

  Yes, your PC has integrated graphics controller: ATI Radeon XPress 200, we don't find drivers compatible Windows 7 ATI.

  The BEST OPTION: Buy a video card, then insert it into slot PCI Express 16 on the motherboard to better display and multimedia performance with Windows 7 to a value using else, it looks just like Windows XP

• I have to reset the charge cycle counter after replacing the battery?

  I had a defective power adapter, running on the number of cycles of load on my battery.  Thus, it no longer accepts a charge.  I have been running only on AC for over a year now, but finally decided to replace the battery.  What are the steps to reset the counter after replacing the battery?

  Replce just the battery, the battery will communicate the number of cycles to the computer. No adjustment is necessary.

• Siri will not stop me give a military even if time the "time of 24 hours' has been disabled in my settings.  How do I change AM/PM?

  Siri will not stop me give a military even if time the "time of 24 hours' has been disabled in my settings.  How do I change AM/PM?

  What you have for country & region and what default language.

• After downlading the new version of iTunes, it will not be open.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I have a TOTAL disaster. After downlading the new ITune prgram, it doesn't let me open it. I tried to reinstall it 3 times and then to restore the previos versions and it is still has not opened. Now, I installed again new version of ITune and when I click the icon, it begins to 'think' and then it stopped without any result and leaves open.

  HELP.how can I solve it with all my songs can not opened and played.

  Liya

  Hi Liya,

  Windows operating system you are using?

  You can view the following Apple support link and check if it helps to solve the problem:

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  If the problem persists, you could get in contact with Apple support for further assistance:

  ITunes support