HP G62 slot work only 1 RAM
I have a HP G62 laptop with two cards of 2 GB of RAM, but only one of the slots of RAM will work. If I swap the cards up and down, they both work in the slot in the bottom, but none of them will not work in the upper housing. Only the location of the bottom works.
I recently ordered the BIOS to the latest version. I had the laptop completely out several times replace the paste heat on the CPU and GPU, and another slot RAM problem, it seems to work very well.
What can you do to a computer that recognizes that RAM in one of its slots? Should I install an older BIOS? Or probably it's a physical problem with the slot or the motherboard?
Hello:
IMO, there is a motherboard problem and communication with this memory is bad.
The only solution would be to replace the motherboard.
Tags: Notebooks
Similar Questions
-
mini presentation remote mac works only sporadically
Hi all
I have a Logitech R400 that needs to be able to control the PowerPoint on a Mac mini.
Yesterday it worked fine.
Today, he works only sporadically, and I have not changed a thing. It's still the same presentation.
Sometimes, you can change the slide and sometimes you can't (even when standing very close to the Mac mini).
This Mac mini specifications are quite anemic (1.4 GHz and 4 GB of memory), but I closed all applications except PowerPoint and have nearly 2 GB of free memory.
Any thoughts?
Any help would be most appreciated!
Mike
Based on
http://www.Logitech.com/en-us/product/Wireless-Presenter-R400
the remote uses a USB wifi dongle and operates on the 2.4 GHz band.
This band is susceptible to interference and I think that is causing your problem.
Peripheral USB 3 is a source of interference.
Try to use the dongle at the end of an extension USB cable
-
It has been some time now that I noticed my addons not working not not on Mozilla TO in Ubuntu. Addons are installed properly and, indeed, they appear when I use mozilla sync in other computers.
Today I tried the suggested troubleshooting here https://support.mozilla.org/en-US/questions/982460
It works only once. I can install my addons again, but as soon as I close firefox and reopen the addons disappear from the top bar and the customization window. Even when I try to change preferences for Ghostery I get only blank a screen so addons are absolutely not working in UbuntuNote that the OP is using the developer edition (39 Firefox) and not the regular version.
Have you checked for problems caused by one or more of the extensions that may not be fully compatible with OF?
Create a new profile as a test to see if your profile is the source of the problem.
See "create a profile":
- https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.
-
My USB to ethernet adapter works only if plugged into my MacBook Pro.
I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!
Any suggestions?
Juice what 'expander' did you use?
What model of MacBook Pro?
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?
RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.
-
CPU works only 30-40% on Satellite A200
On my Toshiba Satellite A200-10w psaece I was running like a lot of antivirus programs, music player, web browser, photo programs as well as the transformer works only 30-40%.
Someone knows why? It's a solution?
I have all the updated drivers, include the bios.
Thank you
Are you sure you knew what you're talking about?
I think you don t know how a CPU Intel Core 2 Duo T7200(2.0GHz) work.The fact is that this processor supports Enhanced Intel SpeedStep technology and this is the main reason why you CPU doesn t ALWAYS better performance running.
Maybe you should check the Intel page for more details and for more information on Enhanced Intel SpeedStep Technology, if this feature is not known to you!
Welcome mate
-
Satellite A130: Fn key not working only not with Vista - only FlashCards
Hello
I've been looking around in the forums, but I couldn't find solutions to my problem.
I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.
Is there something else I could do?
Thank youI have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.
-
Equium A110-233 stops using the WiFi and the fans work only 3 sec
I bought an A110 - 233 20/09/06. It works very well for about 1 hour then it interrupts the communication via the wireless network connection status States he is always connected, sometimes but not always the configuration window indicates that the without wire is cut and I should turn it on at the bottom of the window (there is lit) processor Intel Pro.
I brought the world PC waiting for a replacement but I had to sit for an hour trying to reproduce the error, we couldn't go wrong but I have discovered that it does only when running on the network.
Cooling fan only works for 1-3 seconds at a time, is it possible to increase this number.
Any help would be appreciated
BobHello
If you want to change the properties of cooling module you must do in the standby power settings.
You should know that the energy saver uses different modes of consumption. The laptop is using another mode of energy if the AC adapter is plugged and another mode of power if the laptop works only with the battery.
On the basis of energy saver menu, you will be able to change the method of cooling. This option controls the fan.It is not easy to solve the problem of WLAN communication. I mean that there is no general solution. Additional it is not easy to solve because the issue doesn't happen always, but sometimes only. Perhaps the intensity of the signal is sometimes lower and therefore, the configuration software WLan Intel reports that the wireless network is turned off.
In addition, you should also check the Wlan card properties. You will find that the properties in Device Manager-> right click on the wireless network card.
Here, you must select the Advanced tab.
You should find a few interesting options such as energy saving (disable) or the strength of the signal (enable).In addition, you can try to update the WLan driver. Maybe a new version is available.
By the way: you should also know that some 3rd party application could have a bad influence on WLan communication.
-
Lenovo Vibe X 3 works only if the prosecution so disconnected it out
Hi my Lenovo Vibe X 3 works only when it is connected to the charger, so disconnected mobile switches off the coast. I took it to the service center and it's under warranty they replaced the battery free of cost. But the problem persists. Please suggest any help is very appreciated.
Back to the service center to let them check again. Get the receipt of service that you received the last time you went there.
-
Satellite A300D-155 - camera works only 2 seconds
I have problem with the camera.
Whenever I start it, it works only 2 seconds, and then the image is black. The blue indicator light is all the time. When I start properties even change nothing, photo appears again. Worse still when I call someone, I can't help.
What should I do?
Have you updated the driver for the camera and looked for a BIOS update?
Check this on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversIt's strange, but I think that an update of the driver should help.
Perhaps more programs try to use the camera. Select this check box. -
My program works only in debug mode
Dear all,
I'm just starting to use LabVIEW and develop a pilot thing.
The program is rather in order because I only used to work with text-based program.
The current program works without any error message from debug mode.
To give an idea of how it is made:
1. configure the serial port settings (address of the machine, baud rate, parity, etc.)
2. send to the instument the name of a short to run program.
3 send commands of mutiple string instruments. These channel commands build a short program to control the instrument.
4 send another command string to run the short program
The problem is that it does not work in enforcement mode. It seems to me that the communication between the device and the computer seems to be too fast.
Given that the program is designed in a sequential manner, not have a loop while or do loop so I can not add any timing function.
Could someone give me a tip or a good direction for this problem? It would be really appreciated. Thank you.
You could do something like the amendment attached. Note how I modified the component of connector for the Subvi in the classic 4-2-2-4 operating mode and notice where I connected the terminals.
NOTE: I guess that the VI is supposed to work only once, and that you do not use the continuous run button in the toolbar. You're not, are you?
-
Hello
My 3 year old hp pavilion x 2 removable 2 in 1 touch screen works only if detached from the keyboard. It has been for the last couple momths stop without warning whenever it was moved slightly while attached to the keyboard. Now it doesn't work at all and stops as soon as I connect it to the keyboard. Everything else works fine. Any help is appreciated. Thank you.
Pat
Hello @pmm25,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I read your post about the problem of keyboard and wanted to help you!
Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options. Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.htmlPlease let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
LabVIEW 2009 .exe works only with windows 2000
I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?
Thank you
dkfire wrote:
If you build an exe on a XP machine, then it will work only on XP.
You need generate the exe on a Windows 2000 machine to make it work.
Simply not true - even close to not being not right.
Chris,
My guess is that the .NET component is not present on the pc of w2k.
-
EXE works only on machines with installed LV
I've updated a program which brought the following changes:
Added a whole Panel VI to consolidate data data entry, from control quadrant and added a user input for the default file location. This VI opens a new front end and closes once completed. The EXE version of this works only on machines with the installed full LV.
EXE from the old version to be distributed very well as an exe with the constructor of the app. Now the new version does not work on the LVRT machines.
I don't know that miss me a check box in some set up the Panel as "running back" or something like that. Clues will be greatly appreciated.
Thank you
DWH
Is not in the instr.lib. It is a lvlib in vi.lib analysis. Have you created an installer for the exe or did you just copied the exe file on? You must always use a Setup program. I suspect one of the support files is missing - lvanlys.dll which is supposed to be in the data under the APP folder.
-
NEITHER Spy works only in the development environment?
NEITHER Spy works on LabView (executables) stand-alone applications deployed (using VISA vi), or NI Spy works only in the development environment? It might be useful for debugging of deployed applications.
If the answer is Yes (which I doubt), OR would have to create an installer for it since currently it is no longer available as an add-on.
Thank you
Ed
Edjsch,
You can install VISA as a standalone w/o LabVIEW. Spy is not a stand-alone installer because it does nothing in itself. That's why we always package it with a driver or application software.
Maybe you are looking for
-
Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40
Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.
-
I wanted my next computer be at HP because I knew that those who worked at the factory in Vancouver, Washington. I never stop thinking they were sending all their manufacturing outside America. I ordered my PC and laptop online with extended warran
-
Problem opening Windows__
Windows does not, rather it says "window was not upgraded correctly, returning from changes" and then stops.
-
Windows 7 Enterprise 64-bit version - can't enable offline files.
I'm trunning Microsoft Windows 7 64 - bit Enterprise version. When I enable offline files, I am asked to reboot the laptop to turn it on, but once the computer restarts portable offline files is disabled again. I have re-tried this step number countl
-
New Logitech mouse will click, but don't move?
Hey,. My mouse wheel broke, but the function of the buttons and moving still works, so I bought a new mouse (Logitech). When I plugged the new mouse in the light came, I could scroll left and right click but don't move. I already reinstalled the driv