HP G62 U.S.-340, black screen and flashing caps lock.

HP G62 U.S.-340, black screen and flashing caps lock when I turn it on, and some time it lights up as it should. I tried draining the power of the unit to reset and it wasn't any help. Can you help me please?

Hi @mikeyh25

Thank you for your request, I will do my best to help!

I understand that when you start your laptop, you get a black screen with no error message, but you see the flashing lock light.

Here is a link to help you.  The computer does not start and the lights blink or the computer will beep.

Good luck!

Tags: Notebooks

Similar Questions

  • Compac cq62: downloaded windows 10. Now I have a black screen and the caps button continues to blink. All the answers.

    Downloaded Windows 10. 1 week later, I have a black screen. When I turn on the power to all I get is a flashing caps button one am not able to connect. Ilha a Compaq cq62 model.

    I have seen this reported, and the response is not good, sorry:

    "Problems of upgrading Windows 10: black screen after update (new).
    Some users taking advantage of the Windows 10 upgrade are the conclusion that once the completed upgrade their device just gives them a black screen and does not start.
    Microsoft is still working on a fix for this, but it's not a way to avoid it now. Worse, it seems that the problem that happens on multiple PC configurations. For now, we can only suggest using the utilities provided with your backup device and create some external media backup before starting the upgrade in case that happens. If this happens and you live near a Microsoft Store, make an appointment with them to have your device looking if you experience the problem. Some reports (such as those of our comments) indicate that disabling anti-virus programs before performing the upgrade prevents this issue. »

    http://www.GottaBeMobile.com/2015/07/30/7-Windows-10-upgrade-problems-how-to-fix-them/

  • Windows 7 home first OA: start of the laptop but I have a black screen, but the caps lock button led on and outside

    Dear anyone!

    I need a help of deperate. I have a Windows 7 first OA type HP laptop at home that he is the specification that I have.

    I would write what happened. I always before I close my laptop I chose the tab.and of sleep when I open again is to start automatically, but somethimes I do the Start button. So my problem started when I did my usual close choose the sleep tab and he's fine, leater but10 to 15 minutes, I forgot something and I wanted up, after the start I heard my lap top speed and good early but the screen is pitch black, no company logo and nothing! I've noticed that only a seeing of CAPS LOCK button is on and outside. My question is what is the problem, I hope that no Virus! Or I had to close something? How can I start my lap top once again? Help, please!

    sincerely

    Zoltan

    Try a hard reset:

    http://support.HP.com/us-en/document/c01684768

  • Black screen on startup, caps lock flashing - Compaq Presario CQ57 311SO

    I got this computer from a friend who owns a son.

    We do not know how or when it appeared first, but it's in this State for a few months now.

    It is a Compaq Presario CQ57-311SO and its a little more than 1 year, so store warranty has expired.

    What happens is that when you press the button power has nothing to display on the screen and you do not hear the sounds of typical start-up, the beep and the hard disk rotates upward.

    Instead of this, the Caps Lock key led flashes in the following model, 2 flashes pause 2 flashes.

    The computer is totally immune to any key, usb and cd entries.

    I tried the hard reset and memory sharing in different locations.

    But it seems that the bios itself is corrupt and failed.

    So my question is, can I Flash the bios somehow and make it work again?

    I tried a tutorial on how to do memory flash in FAT - 16 but no noticeable effect.

    Although the guide could be wrong or I could have done something wrong so I would really like to try again if I could get help with instructions from you nice people

    Thanks in advance.

    I solved the problem in dismembering the computer laptop everything and put back the battery CMOS.

    Thank you.

  • HELP computer laptop has frozen with power on a black screen and flashing lights

    Hi I have HP Pavilion dv 7-3162nr laptop. When I turned it on all the lights have gone but the screen was completely black. To add, the shift lock and numlock began to Flash all 3 secends. I have no idea why my laptop that was, but pls pls HELP all my tests and valuable information on the laptop. I'm dead without him! Thank you!

    Hello

    Try a Hard Reset as follows.

    Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

    If the above doesn't help, see if you can match the sequence of "Flashes" to those shown in the table below.

    Kind regards

    DP - K

  • Won't boot NB205 - black screen and white flashing underscore

    My toshiba nb205 won't start...
    Its shows a black screen with flashing white underscore in the top left...

    What should I do?
    The operating system is bad? Bad hard drive?
    Bad motherboard?

    Please help thanks guys.

    Hello

    I can't give you a precise answer.
    Restart your laptop and enter the BIOS settings.
    Disk recognized and listed correctly?

  • Satellite Pro L450D black screen and will not respond to any keys

    Hello

    My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

    Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

    A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

    As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

    + Windows 7 +.
    + Recover Windows to Factory Settings [active EMS] +.

    So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

    I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

    I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

    Any help would be grateful.

    Hello

    Have you tried the option of HARD drive recovery?

    If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
    Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

    I hope it will work!

  • Satego X 200-21 L - black screen and 3 beeps at startup

    Hello

    I have a problem when I turn on my computer (Satego X 200-21 L). I had a black screen and 3 don't beeps no boot up BIOS not nothing what do I do?

    Everyone everyone please help!

    Hello

    Looks like a hardware malfunction on your laptop, because normally these beep codes mean that it s something wrong with the hardware.

    Is that what you have installed extra RAM? If Yes, remove it and try to boot with original RAM only. Also try to reset the RAM in the slot.
    It work?

    In the worst cases, you must go to an authorized service provider. Technicians can check the laptop and determine the cause of this problem.

  • Satellite L300 has only a black screen and will not load.

    Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
    See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

    Can someone help

    Thank you
    Tony.

    Hello

    You mean that you are not able to access the BIOS?
    Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

    If nothing will not help to remove the battery and disconnect the portable AC.
    Wait for about 1 hour then reconnect both sides and try to turn on the laptop.

  • Satellite L350 - 170 Vista black screen and strong continuous beeps

    Since an update of windows who has not completed, the pc does not start.
    After the first page, it goes to a black screen and beeps very. I don't have a recovery disk when I bought the pc.
    Have tried with recovery Vista downloaded, holding the key F8, it happens where you can choose the repair of launch, it launches the application, but then after a few seconds it stops and starts beeping again.
    Is there a recovery cd (download) I can get for this PC and how to fix this?
    Thank you

    What happens if you try to start Windows in safe mode and delete update (s)...

    > Is there a recovery cd (download) I can get for this PC and how to fix this?

    There is no free download link, you can buy a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba you can also do a new install of Windows since Windows copy disk.

  • Satellite - black screen and can't restart with the recovery disk

    I have a black screen and can not restart with the restore disc but it seems to be.

    I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

    Hey,.

    This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
    You can start Windows or access the BIOS?
    You must post a few more details, otherwise we can t help you :(

    Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

  • Satellite A210 - 11 p - gos black screen and HARD drive does not

    Hello

    My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

    I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
    The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

    Not too sure what to do and any advice would be welcome.

    Hey Buddy,

    > I reloaded Windows 7 but still no joy.
    Have you ever tried with Toshiba Recovery disk operating system?

    The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

    That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

  • After logging on my Satellite Pro only black screen and the cursor are visible

    I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

    I do not prefer the product cause of my data recovery on this subject, any ideas?
    thnx

    Hello

    You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

    Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
    But wait; have you tried to connect the laptop to the external display?
    Check it!
    Maybe you could see something on the second screen.

    I think that this procedure could be useful to clarify what s wrong.
    To me this question looks like a small little dysfunction of the FL inverter.
    In this case the installation of the new operating system will help you not to solve this problem.

    But who knows the verification is necessary to find what could be wrong.

    Good luck and bye ;)

  • Start black screen and beeps, HELP pls

    I have a HP Pavilion zv5410. When I turn it on it has a black screen and it beeps (1-2-2). I went on some sites about, but don't really understand what is happening.

    I put the new RAM in because that I was told by a techie, it was usually the RAM goes bad, but this did not help. I can't do anything with the BIOS because I can not even a screen to enter in info, even with an external monitor.

    I was told that I could get the data on my hard drive with a hard drive enclosure kit. I bought the kit box Rocketfish 2.5 inches, but it has a different connector (for individual pins where solid mieare 'PIN' this slide down into the connector of the laptop).

    Any ideas or suggestions. I'd appreciate any help.

    Thank you all,

    K

    It worked!  I feel so stupid for not trying to see if the plastic piece came out.  Thank you much for the help!

    Karen

  • iPhone 6 alternating between the black screen and the Apple logo and nothing else

    my iPhone 6 alternates between a black screen and the Apple logo, what do I do?

    Hi Nathanielfromwa,

    If your iPhone 6 alternates between black screens and the Apple logo, this could be a problem that can be fixed by wiping your iPhone to factory settings. If this is the case, save your iPhone first. I've included links if you need help with backing up your iPhone, but also to reset to the factory settings.

    How to back up your device using iCloud or iTunes - Apple Support

    Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch - Apple Support

    I hope this helps, and if you have more questions, do not hesitate to ask!

Maybe you are looking for

  • Resolution of the problems of El Capitan and Mac Pro GT 120?

    When El Capitan came out, I've updated my Mac Pro 4.1 which has three screens on three GT 120 s.  It was a disaster.  I need three screens and buy new maps for El Capitan is illogical.  Can someone tell me if this has been resolved now?

  • I accidentally deleted the bar bar tools and the command and all that is located above the tabs. How can I get that back?

    I accidentally deleted all located above the tabs: toolbar, command bar etc and now I have no idea how to get it back. Can someone help me please? User Agent Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; M

  • Cases with belt clips?

    For my work, I pretty much need a belt clip. In the past, I really liked the series 'Platinum' slim product BestBuy case (had one for my S3). Basically I want a belt clip case for my new X... preferably one a low, thinner profile. Thank you

  • Reliable link for Windows Installer

    Hi all I use http://www.microsoft.com/download/en/details.aspx?id=8483 link to download Windows Installer 4.5 for Windows XP. I would like to be sure that this link is reliable and will not be changed in the future (at least in the coming months). Co

  • EliteBook 8560w can't update the bios

    Hello I have a 8560w pro over-pants worm i7 EliteBook. I have a few minor problems, so I'll try to update the version of the BIOS. I currently have the F.03. I tried to download and install several versions of the HP site, but it just will not be upd